( pcb2gcode 2.5.0 )
( Software-independent Gcode )

G94 ( Millimeters per minute feed rate. )
G21 ( Units == Millimeters. )

G90 ( Absolute coordinates. )
G00 S10000 ( RPM spindle speed. )
G01 F100.00000 ( Feedrate. )


G00 Z10.00000 (Retract to tool change height)
T1
M5      (Spindle stop.)
G04 P1.00000 (Wait for spindle to stop)
(MSG, Change tool bit to mill diameter 0.00000mm)
M6      (Tool change.)
M0      (Temporary machine stop.)
M3 ( Spindle on clockwise. )
G04 P1.00000 (Wait for spindle to get up to speed)
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X7.01308 Y178.58739 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X7.01308 Y178.58739
G01 X7.01308 Y179.58739
G01 X7.01450 Y179.60205
G01 X7.02570 Y179.62907
G01 X7.04641 Y179.64977
G01 X7.07343 Y179.66098
G01 X7.08809 Y179.66240
G01 X7.11676 Y179.65668
G01 X7.12974 Y179.64977
G01 X7.15044 Y179.62907
G01 X7.16165 Y179.60205
G01 X7.16307 Y179.18620
G01 X7.58450 Y179.18620
G01 X7.58450 Y179.58739
G01 X7.59022 Y179.61609
G01 X7.59713 Y179.62907
G01 X7.61783 Y179.64977
G01 X7.64486 Y179.66098
G01 X7.67414 Y179.66098
G01 X7.70117 Y179.64977
G01 X7.72187 Y179.62907
G01 X7.73307 Y179.60205
G01 X7.73449 Y179.58739
G01 X7.73449 Y178.58739
G01 X7.73307 Y178.57276
G01 X7.72187 Y178.54574
G01 X7.70117 Y178.52504
G01 X7.67414 Y178.51384
G01 X7.65951 Y178.51241
G01 X7.63081 Y178.51813
G01 X7.61783 Y178.52504
G01 X7.59713 Y178.54574
G01 X7.58593 Y178.57276
G01 X7.58450 Y179.03621
G01 X7.16307 Y179.03621
G01 X7.16165 Y178.57276
G01 X7.15044 Y178.54574
G01 X7.12974 Y178.52504
G01 X7.10272 Y178.51384
G01 X7.08809 Y178.51241
G01 X7.05939 Y178.51813
G01 X7.04641 Y178.52504
G01 X7.02570 Y178.54574
G01 X7.01450 Y178.57276
G01 X7.01308 Y178.58739
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X8.01308 Y178.58739 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X8.01308 Y178.58739
G01 X8.01450 Y178.57276
G01 X8.02570 Y178.54574
G01 X8.04640 Y178.52504
G01 X8.07343 Y178.51384
G01 X8.65951 Y178.51241
G01 X8.67414 Y178.51384
G01 X8.70116 Y178.52504
G01 X8.72187 Y178.54574
G01 X8.73307 Y178.57276
G01 X8.73307 Y178.60205
G01 X8.72187 Y178.62908
G01 X8.70116 Y178.64978
G01 X8.68819 Y178.65669
G01 X8.65951 Y178.66240
G01 X8.44876 Y178.66240
G01 X8.44876 Y179.58739
G01 X8.44305 Y179.61612
G01 X8.42679 Y179.64045
G01 X8.41541 Y179.64977
G01 X8.38836 Y179.66098
G01 X8.35908 Y179.66095
G01 X8.34501 Y179.65668
G01 X8.32067 Y179.64038
G01 X8.22027 Y179.49235
G01 X8.13886 Y179.41094
G01 X8.04209 Y179.36093
G01 X8.02291 Y179.33883
G01 X8.01691 Y179.32539
G01 X8.01326 Y179.29636
G01 X8.01575 Y179.28186
G01 X8.02883 Y179.25569
G01 X8.05092 Y179.23652
G01 X8.07871 Y179.22727
G01 X8.09339 Y179.22686
G01 X8.12161 Y179.23461
G01 X8.22715 Y179.28846
G01 X8.29878 Y179.35872
G01 X8.29878 Y178.66240
G01 X8.07343 Y178.66098
G01 X8.04640 Y178.64978
G01 X8.02570 Y178.62908
G01 X8.01879 Y178.61610
G01 X8.01308 Y178.58739
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X2.56511 Y147.77097 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X2.56511 Y147.77097
G01 X2.57301 Y147.73747
G01 X2.62061 Y147.64222
G01 X2.63468 Y147.62271
G01 X2.69373 Y147.56571
G01 X2.84784 Y147.46429
G01 X3.06869 Y147.41027
G01 X3.44964 Y147.41027
G01 X3.48317 Y147.41819
G01 X3.58870 Y147.47204
G01 X3.64550 Y147.52749
G01 X3.65954 Y147.54697
G01 X3.71309 Y147.65850
G01 X3.71309 Y147.88344
G01 X3.65957 Y147.99500
G01 X3.64550 Y148.01448
G01 X3.58870 Y148.06993
G01 X3.48317 Y148.12378
G01 X3.44964 Y148.13168
G01 X3.21154 Y148.13168
G01 X3.17801 Y148.12378
G01 X3.08276 Y148.07618
G01 X3.06323 Y148.06211
G01 X3.00783 Y148.00531
G01 X2.95396 Y147.89975
G01 X2.94606 Y147.86620
G01 X2.94606 Y147.67572
G01 X2.95398 Y147.64219
G01 X2.98309 Y147.58398
G01 X2.90897 Y147.60249
G01 X2.78312 Y147.68639
G01 X2.74934 Y147.72015
G01 X2.71510 Y147.78867
G01 X2.71367 Y147.97610
G01 X2.70247 Y148.00313
G01 X2.68177 Y148.02383
G01 X2.66879 Y148.03074
G01 X2.64012 Y148.03645
G01 X2.61141 Y148.03074
G01 X2.58708 Y148.01448
G01 X2.57082 Y147.99015
G01 X2.56511 Y147.96145
G01 X2.56653 Y147.04204
G01 X2.56653 Y147.07133
G01 X2.57773 Y147.09835
G01 X2.59843 Y147.11905
G01 X2.62546 Y147.13026
G01 X2.64012 Y147.13168
G01 X3.35439 Y147.13168
G01 X3.37809 Y147.12784
G01 X3.52094 Y147.08024
G01 X3.55025 Y147.06211
G01 X3.64550 Y146.96686
G01 X3.66363 Y146.93755
G01 X3.71413 Y146.78301
G01 X3.71509 Y146.67572
G01 X3.70938 Y146.64705
G01 X3.70247 Y146.63407
G01 X3.68177 Y146.61337
G01 X3.65474 Y146.60216
G01 X3.62546 Y146.60216
G01 X3.59843 Y146.61337
G01 X3.58708 Y146.62271
G01 X3.57773 Y146.63407
G01 X3.56653 Y146.66109
G01 X3.56511 Y146.75881
G01 X3.52693 Y146.87331
G01 X3.45673 Y146.94354
G01 X3.34220 Y146.98169
G01 X2.62546 Y146.98311
G01 X2.59843 Y146.99432
G01 X2.57773 Y147.01502
G01 X2.56653 Y147.04204
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X3.09605 Y147.69345 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X3.09605 Y147.69345
G01 X3.13031 Y147.62492
G01 X3.16071 Y147.59452
G01 X3.22924 Y147.56025
G01 X3.43191 Y147.56025
G01 X3.50041 Y147.59452
G01 X3.53084 Y147.62495
G01 X3.56511 Y147.69345
G01 X3.56511 Y147.84849
G01 X3.53084 Y147.91702
G01 X3.50044 Y147.94745
G01 X3.43193 Y147.98169
G01 X3.22922 Y147.98169
G01 X3.16071 Y147.94745
G01 X3.13031 Y147.91705
G01 X3.09605 Y147.84849
G01 X3.09605 Y147.69345
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X4.38746 Y142.31005 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X4.38746 Y142.31005
G01 X4.39203 Y142.28714
G01 X4.41413 Y142.26019
G01 X4.44748 Y142.25005
G01 X12.06748 Y142.25005
G01 X12.09041 Y142.25462
G01 X12.11736 Y142.27672
G01 X12.12747 Y142.31005
G01 X12.12747 Y152.47002
G01 X12.12290 Y152.49298
G01 X12.10080 Y152.51993
G01 X12.06748 Y152.53004
G01 X4.44748 Y152.53004
G01 X4.42452 Y152.52547
G01 X4.39757 Y152.50337
G01 X4.38746 Y152.47002
G01 X4.38746 Y142.31005
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X4.50747 Y142.37009 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X4.50747 Y142.37009
G01 X10.73746 Y142.37009
G01 X10.73746 Y152.41003
G01 X4.50747 Y152.41003
G01 X4.50747 Y142.37009
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X10.85747 Y142.37009 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X10.85747 Y142.37009
G01 X10.85747 Y152.41003
G01 X12.00746 Y152.41003
G01 X12.00746 Y142.37009
G01 X10.85747 Y142.37009
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X17.94499 Y133.02503 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X17.94499 Y133.02503
G01 X17.94499 Y161.75502
G01 X46.67498 Y161.75502
G01 X46.67498 Y133.02503
G01 X17.94499 Y133.02503
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X17.82497 Y132.96501 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X17.82497 Y132.96501
G01 X17.82497 Y161.81501
G01 X17.82954 Y161.83797
G01 X17.84255 Y161.85746
G01 X17.86203 Y161.87046
G01 X17.88499 Y161.87503
G01 X46.73500 Y161.87503
G01 X46.75793 Y161.87046
G01 X46.77742 Y161.85746
G01 X46.79042 Y161.83797
G01 X46.79499 Y161.81501
G01 X46.79499 Y132.96501
G01 X46.79042 Y132.94207
G01 X46.77742 Y132.92259
G01 X46.75793 Y132.90958
G01 X46.73500 Y132.90501
G01 X17.88499 Y132.90501
G01 X17.86203 Y132.90958
G01 X17.84255 Y132.92259
G01 X17.82954 Y132.94207
G01 X17.82497 Y132.96501
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X18.78999 Y129.41002 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X18.78999 Y129.41002
G01 X18.78999 Y130.41002
G01 X27.90997 Y130.41002
G01 X27.90997 Y129.41002
G01 X18.78999 Y129.41002
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X16.98761 Y124.01669 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X16.98761 Y124.01669
G01 X16.98761 Y124.63574
G01 X16.99299 Y124.66368
G01 X16.99955 Y124.67638
G01 X17.01923 Y124.69693
G01 X17.04512 Y124.70869
G01 X17.07354 Y124.70996
G01 X17.10039 Y124.70053
G01 X17.37151 Y124.46510
G01 X17.43031 Y124.58435
G01 X17.48575 Y124.64115
G01 X17.50524 Y124.65522
G01 X17.61679 Y124.70874
G01 X17.88936 Y124.70874
G01 X18.01120 Y124.64897
G01 X18.07582 Y124.58435
G01 X18.12967 Y124.47882
G01 X18.13760 Y124.44526
G01 X18.13559 Y124.14232
G01 X18.07582 Y124.02045
G01 X18.02037 Y123.96365
G01 X17.99604 Y123.94740
G01 X17.98197 Y123.94313
G01 X17.95271 Y123.94315
G01 X17.92566 Y123.95436
G01 X17.90498 Y123.97506
G01 X17.89378 Y124.00208
G01 X17.89381 Y124.03134
G01 X17.90501 Y124.05839
G01 X17.95334 Y124.10874
G01 X17.98761 Y124.17727
G01 X17.98761 Y124.42756
G01 X17.95334 Y124.49606
G01 X17.92291 Y124.52649
G01 X17.85441 Y124.56076
G01 X17.65174 Y124.56076
G01 X17.58321 Y124.52649
G01 X17.55279 Y124.49609
G01 X17.51855 Y124.42758
G01 X17.51855 Y124.30239
G01 X17.51316 Y124.27447
G01 X17.49774 Y124.25055
G01 X17.48692 Y124.24122
G01 X17.46104 Y124.22946
G01 X17.44687 Y124.22748
G01 X17.41872 Y124.23162
G01 X17.39416 Y124.24595
G01 X17.13760 Y124.47046
G01 X17.13617 Y124.00206
G01 X17.12497 Y123.97503
G01 X17.10427 Y123.95433
G01 X17.09129 Y123.94742
G01 X17.06262 Y123.94171
G01 X17.04796 Y123.94313
G01 X17.02093 Y123.95433
G01 X17.00023 Y123.97503
G01 X16.98903 Y124.00206
G01 X16.98761 Y124.01669
G01 X16.98761 Y123.11191
G01 X16.98903 Y123.09728
G01 X17.00023 Y123.07026
G01 X17.02093 Y123.04956
G01 X17.04796 Y123.03836
G01 X17.06262 Y123.03693
G01 X18.06261 Y123.03693
G01 X18.07724 Y123.03836
G01 X18.10427 Y123.04956
G01 X18.12497 Y123.07026
G01 X18.13617 Y123.09728
G01 X18.13617 Y123.12657
G01 X18.12497 Y123.15360
G01 X18.10427 Y123.17430
G01 X18.07724 Y123.18550
G01 X17.66140 Y123.18692
G01 X17.66140 Y123.31097
G01 X18.10562 Y123.62190
G01 X18.12586 Y123.64305
G01 X18.13249 Y123.65616
G01 X18.13760 Y123.68496
G01 X18.13124 Y123.71354
G01 X18.11448 Y123.73752
G01 X18.08979 Y123.75324
G01 X18.06099 Y123.75834
G01 X18.03241 Y123.75199
G01 X17.66127 Y123.49398
G01 X17.65350 Y123.52642
G01 X17.60587 Y123.62167
G01 X17.59180 Y123.64115
G01 X17.53501 Y123.69660
G01 X17.42947 Y123.75044
G01 X17.39594 Y123.75834
G01 X17.23584 Y123.75634
G01 X17.12431 Y123.70285
G01 X17.10481 Y123.68877
G01 X17.04936 Y123.63198
G01 X16.98962 Y123.51011
G01 X16.98761 Y123.11191
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X17.13760 Y123.18692 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X17.13760 Y123.18692
G01 X17.13760 Y123.47519
G01 X17.17184 Y123.54371
G01 X17.20224 Y123.57412
G01 X17.27077 Y123.60836
G01 X17.37824 Y123.60836
G01 X17.44674 Y123.57412
G01 X17.47714 Y123.54369
G01 X17.51141 Y123.47516
G01 X17.51141 Y123.18692
G01 X17.13760 Y123.18692
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X18.78999 Y118.41004 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X18.78999 Y118.41004
G01 X18.78999 Y129.29001
G01 X27.90997 Y129.29001
G01 X27.90997 Y118.41004
G01 X18.78999 Y118.41004
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X18.78999 Y117.29003 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X18.78999 Y117.29003
G01 X18.78999 Y118.29003
G01 X27.90997 Y118.29003
G01 X27.90997 Y117.29003
G01 X18.78999 Y117.29003
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X18.66998 Y117.23001 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X18.66998 Y117.23001
G01 X18.66998 Y130.47002
G01 X18.67455 Y130.49298
G01 X18.69665 Y130.51993
G01 X18.73000 Y130.53004
G01 X27.96999 Y130.53004
G01 X27.99292 Y130.52546
G01 X28.01987 Y130.50337
G01 X28.02998 Y130.47002
G01 X28.02998 Y117.23001
G01 X28.02541 Y117.20707
G01 X28.00331 Y117.18013
G01 X27.96999 Y117.17002
G01 X18.73000 Y117.17002
G01 X18.70704 Y117.17459
G01 X18.68009 Y117.19669
G01 X18.66998 Y117.23001
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X10.23761 Y107.47786 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X10.23761 Y107.47786
G01 X10.24414 Y107.44728
G01 X10.26258 Y107.42198
G01 X10.27533 Y107.41278
G01 X10.30515 Y107.40323
G01 X10.78132 Y107.35563
G01 X10.80936 Y107.35815
G01 X10.83454 Y107.37085
G01 X10.85323 Y107.39191
G01 X10.85928 Y107.40471
G01 X10.86283 Y107.41840
G01 X10.86199 Y107.44657
G01 X10.85082 Y107.47242
G01 X10.80279 Y107.52231
G01 X10.76855 Y107.59081
G01 X10.76855 Y107.79353
G01 X10.80279 Y107.86203
G01 X10.83322 Y107.89244
G01 X10.90174 Y107.92670
G01 X11.10441 Y107.92670
G01 X11.17291 Y107.89244
G01 X11.20334 Y107.86201
G01 X11.23761 Y107.79350
G01 X11.23761 Y107.59084
G01 X11.20334 Y107.52231
G01 X11.15501 Y107.47197
G01 X11.14381 Y107.44491
G01 X11.14378 Y107.41565
G01 X11.15498 Y107.38863
G01 X11.17566 Y107.36793
G01 X11.20271 Y107.35673
G01 X11.23197 Y107.35670
G01 X11.24604 Y107.36097
G01 X11.27037 Y107.37722
G01 X11.32582 Y107.43402
G01 X11.38559 Y107.55589
G01 X11.38559 Y107.82845
G01 X11.32582 Y107.95030
G01 X11.27037 Y108.00709
G01 X11.25089 Y108.02114
G01 X11.13936 Y108.07468
G01 X10.88404 Y108.07669
G01 X10.85049 Y108.06879
G01 X10.74493 Y108.01492
G01 X10.68031 Y107.95030
G01 X10.62057 Y107.82845
G01 X10.61856 Y107.57311
G01 X10.62057 Y107.55589
G01 X10.63578 Y107.52094
G01 X10.38760 Y107.54575
G01 X10.38760 Y107.95406
G01 X10.38188 Y107.98276
G01 X10.37497 Y107.99574
G01 X10.35427 Y108.01644
G01 X10.32725 Y108.02764
G01 X10.29796 Y108.02764
G01 X10.27094 Y108.01644
G01 X10.25023 Y107.99574
G01 X10.24333 Y107.98276
G01 X10.23761 Y107.95406
G01 X10.23903 Y106.98705
G01 X10.23903 Y107.01634
G01 X10.25023 Y107.04337
G01 X10.27094 Y107.06407
G01 X10.29796 Y107.07527
G01 X10.31262 Y107.07669
G01 X11.02689 Y107.07669
G01 X11.05059 Y107.07286
G01 X11.19344 Y107.02523
G01 X11.22275 Y107.00710
G01 X11.31800 Y106.91185
G01 X11.33614 Y106.88253
G01 X11.38663 Y106.72800
G01 X11.38760 Y106.62074
G01 X11.38188 Y106.59206
G01 X11.37497 Y106.57908
G01 X11.35427 Y106.55838
G01 X11.32725 Y106.54718
G01 X11.29796 Y106.54718
G01 X11.27093 Y106.55838
G01 X11.25958 Y106.56773
G01 X11.25023 Y106.57908
G01 X11.23903 Y106.60611
G01 X11.23761 Y106.70379
G01 X11.19943 Y106.81830
G01 X11.12920 Y106.88853
G01 X11.01470 Y106.92670
G01 X10.29796 Y106.92813
G01 X10.27094 Y106.93933
G01 X10.25023 Y106.96003
G01 X10.23903 Y106.98705
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X6.97036 Y98.35149 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X6.97036 Y98.35149
G01 X6.97407 Y98.37945
G01 X7.21814 Y99.10716
G01 X7.23731 Y99.12926
G01 X7.26350 Y99.14234
G01 X7.29268 Y99.14442
G01 X7.32045 Y99.13518
G01 X7.34254 Y99.11600
G01 X7.35563 Y99.08981
G01 X7.35771 Y99.06063
G01 X7.14928 Y98.43073
G01 X7.44640 Y98.43073
G01 X7.44783 Y98.70371
G01 X7.45903 Y98.73073
G01 X7.47973 Y98.75143
G01 X7.50676 Y98.76264
G01 X7.53604 Y98.76264
G01 X7.56307 Y98.75143
G01 X7.57442 Y98.74209
G01 X7.58377 Y98.73073
G01 X7.59497 Y98.70371
G01 X7.59639 Y98.43073
G01 X7.66426 Y98.43073
G01 X7.69294 Y98.42502
G01 X7.70592 Y98.41811
G01 X7.72662 Y98.39741
G01 X7.73782 Y98.37038
G01 X7.73924 Y98.35573
G01 X7.73353 Y98.32705
G01 X7.72662 Y98.31407
G01 X7.70592 Y98.29337
G01 X7.67889 Y98.28217
G01 X7.59639 Y98.28075
G01 X7.59497 Y98.00777
G01 X7.58377 Y97.98075
G01 X7.56307 Y97.96005
G01 X7.53604 Y97.94885
G01 X7.52141 Y97.94742
G01 X7.50676 Y97.94885
G01 X7.47973 Y97.96005
G01 X7.45903 Y97.98075
G01 X7.44783 Y98.00777
G01 X7.44640 Y98.28075
G01 X7.03111 Y98.28207
G01 X7.00490 Y98.29251
G01 X6.99373 Y98.30122
G01 X6.97722 Y98.32411
G01 X6.97036 Y98.35149
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X6.16213 Y98.00777 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X6.16213 Y98.00777
G01 X6.17333 Y97.98075
G01 X6.19403 Y97.96005
G01 X6.20701 Y97.95314
G01 X6.23571 Y97.94742
G01 X6.34293 Y97.94839
G01 X6.49749 Y97.99886
G01 X6.52680 Y98.01699
G01 X6.62205 Y98.11224
G01 X6.64018 Y98.14156
G01 X6.68781 Y98.28441
G01 X6.69164 Y98.30810
G01 X6.69164 Y99.02240
G01 X6.69022 Y99.03706
G01 X6.67902 Y99.06408
G01 X6.65832 Y99.08478
G01 X6.64534 Y99.09169
G01 X6.61666 Y99.09741
G01 X6.60201 Y99.09599
G01 X6.57498 Y99.08478
G01 X6.55428 Y99.06408
G01 X6.54308 Y99.03706
G01 X6.54166 Y98.32030
G01 X6.50348 Y98.20579
G01 X6.43327 Y98.13556
G01 X6.31875 Y98.09741
G01 X6.22106 Y98.09599
G01 X6.19403 Y98.08479
G01 X6.17333 Y98.06409
G01 X6.16213 Y98.03706
G01 X6.16213 Y98.00777
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X5.55997 Y96.15502 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X5.55997 Y96.15502
G01 X5.56454 Y96.13209
G01 X5.57755 Y96.11260
G01 X5.59703 Y96.09960
G01 X5.61999 Y96.09503
G01 X5.64293 Y96.09960
G01 X5.66241 Y96.11260
G01 X5.67542 Y96.13209
G01 X5.67999 Y96.15502
G01 X5.67999 Y97.42502
G01 X6.94999 Y97.42502
G01 X6.98331 Y97.43513
G01 X7.00541 Y97.46208
G01 X7.00881 Y97.49673
G01 X6.99241 Y97.52746
G01 X6.97292 Y97.54046
G01 X6.94999 Y97.54504
G01 X5.61999 Y97.54504
G01 X5.59703 Y97.54046
G01 X5.57755 Y97.52746
G01 X5.56454 Y97.50798
G01 X5.55997 Y97.48502
G01 X5.55997 Y96.15502
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X20.19555 Y78.13649 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X20.19555 Y78.13649
G01 X20.19771 Y78.12247
G01 X20.20960 Y78.09689
G01 X20.21895 Y78.08622
G01 X20.24272 Y78.07106
G01 X20.25634 Y78.06707
G01 X20.67165 Y78.06575
G01 X20.67307 Y77.79275
G01 X20.68428 Y77.76573
G01 X20.70498 Y77.74503
G01 X20.73200 Y77.73382
G01 X20.74666 Y77.73240
G01 X20.76129 Y77.73382
G01 X20.78831 Y77.74503
G01 X20.80901 Y77.76573
G01 X20.82022 Y77.79275
G01 X20.82164 Y78.06575
G01 X20.90414 Y78.06717
G01 X20.93116 Y78.07837
G01 X20.95186 Y78.09908
G01 X20.95877 Y78.11206
G01 X20.96449 Y78.14073
G01 X20.96307 Y78.15539
G01 X20.95186 Y78.18241
G01 X20.93116 Y78.20311
G01 X20.91818 Y78.21002
G01 X20.88951 Y78.21574
G01 X20.82164 Y78.21574
G01 X20.82022 Y78.48871
G01 X20.80901 Y78.51574
G01 X20.79967 Y78.52709
G01 X20.78831 Y78.53644
G01 X20.76129 Y78.54764
G01 X20.73200 Y78.54764
G01 X20.70498 Y78.53644
G01 X20.68428 Y78.51574
G01 X20.67307 Y78.48871
G01 X20.67165 Y78.21574
G01 X20.37450 Y78.21574
G01 X20.58295 Y78.84563
G01 X20.58087 Y78.87482
G01 X20.56779 Y78.90100
G01 X20.54569 Y78.92018
G01 X20.51793 Y78.92943
G01 X20.48875 Y78.92734
G01 X20.46256 Y78.91426
G01 X20.44338 Y78.89217
G01 X20.19929 Y78.16446
G01 X20.19555 Y78.13649
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X19.24366 Y78.53105 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X19.24366 Y78.53105
G01 X19.24575 Y78.50187
G01 X19.25100 Y78.48815
G01 X19.26894 Y78.46504
G01 X19.29436 Y78.45054
G01 X19.32339 Y78.44688
G01 X19.35161 Y78.45463
G01 X19.45715 Y78.50847
G01 X19.52878 Y78.57870
G01 X19.52878 Y77.88239
G01 X19.31809 Y77.88239
G01 X19.28938 Y77.87667
G01 X19.27640 Y77.86976
G01 X19.25570 Y77.84906
G01 X19.24450 Y77.82204
G01 X19.24450 Y77.79275
G01 X19.25570 Y77.76573
G01 X19.27640 Y77.74503
G01 X19.30343 Y77.73382
G01 X19.31809 Y77.73240
G01 X19.90414 Y77.73382
G01 X19.93117 Y77.74503
G01 X19.94252 Y77.75437
G01 X19.95187 Y77.76573
G01 X19.96307 Y77.79275
G01 X19.96449 Y77.80738
G01 X19.95877 Y77.83608
G01 X19.95187 Y77.84906
G01 X19.93117 Y77.86976
G01 X19.90414 Y77.88097
G01 X19.88951 Y77.88239
G01 X19.67877 Y77.88239
G01 X19.67877 Y78.80741
G01 X19.67305 Y78.83613
G01 X19.65679 Y78.86047
G01 X19.64542 Y78.86979
G01 X19.61836 Y78.88099
G01 X19.58908 Y78.88096
G01 X19.56205 Y78.86974
G01 X19.55067 Y78.86039
G01 X19.45027 Y78.71233
G01 X19.36886 Y78.63095
G01 X19.27209 Y78.58094
G01 X19.25291 Y78.55884
G01 X19.24366 Y78.53105
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X18.44069 Y78.35859 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X18.44069 Y78.35859
G01 X18.44069 Y78.73242
G01 X18.72893 Y78.73242
G01 X18.79744 Y78.69816
G01 X18.82787 Y78.66773
G01 X18.86213 Y78.59920
G01 X18.86213 Y78.49179
G01 X18.82787 Y78.42328
G01 X18.79744 Y78.39285
G01 X18.72893 Y78.35859
G01 X18.44069 Y78.35859
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X18.29071 Y77.80738 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X18.29071 Y77.80738
G01 X18.29071 Y78.80741
G01 X18.29213 Y78.82206
G01 X18.30333 Y78.84909
G01 X18.32403 Y78.86979
G01 X18.35106 Y78.88099
G01 X18.36571 Y78.88241
G01 X18.76388 Y78.88041
G01 X18.88573 Y78.82064
G01 X18.94252 Y78.76519
G01 X18.95659 Y78.74571
G01 X19.01011 Y78.63415
G01 X19.01212 Y78.47406
G01 X19.00419 Y78.44053
G01 X18.95034 Y78.33499
G01 X18.89490 Y78.27820
G01 X18.87541 Y78.26415
G01 X18.78019 Y78.21653
G01 X18.74773 Y78.20873
G01 X19.00577 Y77.83758
G01 X19.01212 Y77.80903
G01 X19.00701 Y77.78020
G01 X18.99129 Y77.75552
G01 X18.96731 Y77.73875
G01 X18.93876 Y77.73240
G01 X18.90993 Y77.73751
G01 X18.88524 Y77.75323
G01 X18.56472 Y78.20860
G01 X18.44069 Y78.20860
G01 X18.44069 Y77.80738
G01 X18.43927 Y77.79275
G01 X18.42807 Y77.76573
G01 X18.40737 Y77.74503
G01 X18.38034 Y77.73382
G01 X18.35106 Y77.73382
G01 X18.32403 Y77.74503
G01 X18.30333 Y77.76573
G01 X18.29213 Y77.79275
G01 X18.29071 Y77.80738
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X17.33028 Y76.35590 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X17.33028 Y76.35590
G01 X17.35025 Y76.15313
G01 X17.40709 Y75.96967
G01 X17.49210 Y75.81061
G01 X17.61306 Y75.66144
G01 X17.76079 Y75.53871
G01 X17.94049 Y75.44264
G01 X18.12462 Y75.38801
G01 X18.31585 Y75.37033
G01 X18.50686 Y75.39029
G01 X18.69032 Y75.44714
G01 X18.85916 Y75.53871
G01 X18.99858 Y75.65313
G01 X19.12129 Y75.80083
G01 X19.21735 Y75.98054
G01 X19.26972 Y76.15313
G01 X19.28435 Y76.29001
G01 X19.84999 Y76.29001
G01 X19.88331 Y76.30012
G01 X19.90541 Y76.32707
G01 X19.90998 Y76.35001
G01 X19.90541 Y76.37297
G01 X19.89240 Y76.39245
G01 X19.86167 Y76.40886
G01 X19.28435 Y76.41003
G01 X19.26972 Y76.54696
G01 X19.21735 Y76.71953
G01 X19.12131 Y76.89921
G01 X19.00691 Y77.03863
G01 X18.85916 Y77.16136
G01 X18.67945 Y77.25742
G01 X18.50686 Y77.30977
G01 X18.31585 Y77.32974
G01 X18.11308 Y77.30977
G01 X17.92962 Y77.25293
G01 X17.77056 Y77.16789
G01 X17.62137 Y77.04696
G01 X17.49210 Y76.88943
G01 X17.40709 Y76.73037
G01 X17.35025 Y76.54693
G01 X17.33028 Y76.35590
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X17.45027 Y76.35003 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X17.45027 Y76.35003
G01 X17.46681 Y76.18232
G01 X17.51570 Y76.02103
G01 X17.59515 Y75.87238
G01 X17.70206 Y75.74213
G01 X17.83234 Y75.63520
G01 X17.98098 Y75.55575
G01 X18.14227 Y75.50685
G01 X18.30998 Y75.49032
G01 X18.47768 Y75.50685
G01 X18.63897 Y75.55575
G01 X18.78761 Y75.63520
G01 X18.91788 Y75.74213
G01 X19.02479 Y75.87238
G01 X19.10424 Y76.02103
G01 X19.15316 Y76.18232
G01 X19.16970 Y76.35003
G01 X19.15316 Y76.51775
G01 X19.10424 Y76.67901
G01 X19.02479 Y76.82765
G01 X18.91788 Y76.95793
G01 X18.78761 Y77.06484
G01 X18.63897 Y77.14432
G01 X18.47768 Y77.19321
G01 X18.30998 Y77.20975
G01 X18.14227 Y77.19321
G01 X17.98098 Y77.14432
G01 X17.83234 Y77.06484
G01 X17.70206 Y76.95793
G01 X17.59515 Y76.82765
G01 X17.51570 Y76.67901
G01 X17.46681 Y76.51775
G01 X17.45027 Y76.35003
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X20.14925 Y69.41725 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X20.14925 Y69.41725
G01 X20.15352 Y69.43133
G01 X20.16977 Y69.45566
G01 X20.18113 Y69.46498
G01 X20.20818 Y69.47618
G01 X20.23744 Y69.47621
G01 X20.26446 Y69.46501
G01 X20.31486 Y69.41667
G01 X20.38341 Y69.38241
G01 X20.63368 Y69.38241
G01 X20.70223 Y69.41667
G01 X20.73264 Y69.44707
G01 X20.76688 Y69.51558
G01 X20.76688 Y69.71829
G01 X20.73264 Y69.78680
G01 X20.70221 Y69.81720
G01 X20.63368 Y69.85147
G01 X20.50856 Y69.85147
G01 X20.48062 Y69.85685
G01 X20.45669 Y69.87227
G01 X20.44737 Y69.88309
G01 X20.44026 Y69.89546
G01 X20.43363 Y69.92312
G01 X20.43777 Y69.95126
G01 X20.45209 Y69.97585
G01 X20.67658 Y70.23242
G01 X20.20818 Y70.23384
G01 X20.18115 Y70.24504
G01 X20.16980 Y70.25439
G01 X20.16045 Y70.26574
G01 X20.14925 Y70.29277
G01 X20.14925 Y70.32205
G01 X20.16045 Y70.34908
G01 X20.16980 Y70.36043
G01 X20.19413 Y70.37669
G01 X20.22283 Y70.38240
G01 X20.84188 Y70.38240
G01 X20.85608 Y70.38106
G01 X20.88250 Y70.37047
G01 X20.89372 Y70.36160
G01 X20.91016 Y70.33841
G01 X20.91679 Y70.31075
G01 X20.91608 Y70.29648
G01 X20.90665 Y70.26963
G01 X20.67124 Y69.99851
G01 X20.79050 Y69.93968
G01 X20.84729 Y69.88423
G01 X20.86136 Y69.86475
G01 X20.91486 Y69.75322
G01 X20.91486 Y69.48065
G01 X20.85512 Y69.35878
G01 X20.79967 Y69.30199
G01 X20.78019 Y69.28794
G01 X20.66863 Y69.23442
G01 X20.34846 Y69.23442
G01 X20.22659 Y69.29419
G01 X20.16048 Y69.36094
G01 X20.14927 Y69.38799
G01 X20.14925 Y69.41725
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X19.24308 Y69.30740 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X19.24308 Y69.30740
G01 X19.24879 Y69.33610
G01 X19.25570 Y69.34908
G01 X19.27640 Y69.36978
G01 X19.30343 Y69.38098
G01 X19.52878 Y69.38241
G01 X19.52878 Y70.07872
G01 X19.45715 Y70.00846
G01 X19.35161 Y69.95462
G01 X19.32339 Y69.94687
G01 X19.30871 Y69.94728
G01 X19.28093 Y69.95652
G01 X19.25883 Y69.97570
G01 X19.24575 Y70.00186
G01 X19.24326 Y70.01636
G01 X19.24691 Y70.04540
G01 X19.25291 Y70.05883
G01 X19.27209 Y70.08093
G01 X19.36886 Y70.13094
G01 X19.45027 Y70.21235
G01 X19.55067 Y70.36038
G01 X19.57501 Y70.37669
G01 X19.58908 Y70.38096
G01 X19.61836 Y70.38098
G01 X19.64542 Y70.36978
G01 X19.65679 Y70.36046
G01 X19.67305 Y70.33612
G01 X19.67877 Y70.30740
G01 X19.67877 Y69.38241
G01 X19.88951 Y69.38241
G01 X19.91819 Y69.37669
G01 X19.93117 Y69.36978
G01 X19.95187 Y69.34908
G01 X19.96307 Y69.32205
G01 X19.96307 Y69.29277
G01 X19.95187 Y69.26574
G01 X19.93117 Y69.24504
G01 X19.90414 Y69.23384
G01 X19.88951 Y69.23242
G01 X19.30343 Y69.23384
G01 X19.27640 Y69.24504
G01 X19.25570 Y69.26574
G01 X19.24450 Y69.29277
G01 X19.24308 Y69.30740
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X18.44069 Y69.85858 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X18.44069 Y69.85858
G01 X18.44069 Y70.23242
G01 X18.72893 Y70.23242
G01 X18.79744 Y70.19815
G01 X18.82787 Y70.16772
G01 X18.86213 Y70.09922
G01 X18.86213 Y69.99180
G01 X18.82787 Y69.92327
G01 X18.79744 Y69.89284
G01 X18.72893 Y69.85858
G01 X18.44069 Y69.85858
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X18.29071 Y69.30740 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X18.29071 Y69.30740
G01 X18.29071 Y70.30740
G01 X18.29213 Y70.32205
G01 X18.30333 Y70.34908
G01 X18.32403 Y70.36978
G01 X18.35106 Y70.38098
G01 X18.36571 Y70.38240
G01 X18.76388 Y70.38040
G01 X18.88573 Y70.32063
G01 X18.94252 Y70.26518
G01 X18.95657 Y70.24570
G01 X19.01011 Y70.13417
G01 X19.01212 Y69.97407
G01 X19.00422 Y69.94055
G01 X18.95034 Y69.83498
G01 X18.89490 Y69.77819
G01 X18.87541 Y69.76414
G01 X18.78019 Y69.71652
G01 X18.74773 Y69.70872
G01 X19.00577 Y69.33760
G01 X19.01212 Y69.30905
G01 X19.00701 Y69.28022
G01 X18.99129 Y69.25553
G01 X18.96731 Y69.23877
G01 X18.95334 Y69.23420
G01 X18.92408 Y69.23356
G01 X18.89683 Y69.24415
G01 X18.87569 Y69.26440
G01 X18.56472 Y69.70859
G01 X18.44069 Y69.70859
G01 X18.44069 Y69.30740
G01 X18.43927 Y69.29277
G01 X18.42807 Y69.26574
G01 X18.40737 Y69.24504
G01 X18.38034 Y69.23384
G01 X18.35106 Y69.23384
G01 X18.32403 Y69.24504
G01 X18.30333 Y69.26574
G01 X18.29213 Y69.29277
G01 X18.29071 Y69.30740
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X17.33028 Y67.85592 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X17.33028 Y67.85592
G01 X17.35025 Y68.04692
G01 X17.40260 Y68.21952
G01 X17.49210 Y68.38944
G01 X17.62137 Y68.54692
G01 X17.77056 Y68.66790
G01 X17.94049 Y68.75741
G01 X18.11308 Y68.80976
G01 X18.31585 Y68.82973
G01 X18.50686 Y68.80976
G01 X18.67945 Y68.75741
G01 X18.85916 Y68.66135
G01 X18.99858 Y68.54692
G01 X19.12129 Y68.39922
G01 X19.21735 Y68.21952
G01 X19.26972 Y68.04692
G01 X19.28435 Y67.91004
G01 X19.86167 Y67.90888
G01 X19.89240 Y67.89247
G01 X19.90541 Y67.87299
G01 X19.90998 Y67.85002
G01 X19.90541 Y67.82709
G01 X19.88331 Y67.80014
G01 X19.84999 Y67.79003
G01 X19.28435 Y67.79003
G01 X19.26972 Y67.65310
G01 X19.21735 Y67.48053
G01 X19.12131 Y67.30085
G01 X18.99858 Y67.15312
G01 X18.85916 Y67.03870
G01 X18.69032 Y66.94713
G01 X18.50686 Y66.89028
G01 X18.31585 Y66.87032
G01 X18.12462 Y66.88800
G01 X17.94049 Y66.94263
G01 X17.76079 Y67.03870
G01 X17.61303 Y67.16143
G01 X17.49863 Y67.30085
G01 X17.40709 Y67.46968
G01 X17.35025 Y67.65312
G01 X17.33028 Y67.85592
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X17.45027 Y67.85002 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X17.45027 Y67.85002
G01 X17.46681 Y68.01774
G01 X17.51570 Y68.17903
G01 X17.59515 Y68.32767
G01 X17.70206 Y68.45792
G01 X17.83234 Y68.56486
G01 X17.98098 Y68.64431
G01 X18.14227 Y68.69320
G01 X18.30998 Y68.70974
G01 X18.47768 Y68.69320
G01 X18.63897 Y68.64431
G01 X18.78761 Y68.56486
G01 X18.91788 Y68.45792
G01 X19.02479 Y68.32767
G01 X19.10424 Y68.17903
G01 X19.15316 Y68.01774
G01 X19.16970 Y67.85002
G01 X19.15316 Y67.68231
G01 X19.10424 Y67.52104
G01 X19.02479 Y67.37240
G01 X18.91788 Y67.24213
G01 X18.78761 Y67.13519
G01 X18.63897 Y67.05574
G01 X18.47768 Y67.00684
G01 X18.30998 Y66.99031
G01 X18.14227 Y67.00684
G01 X17.98098 Y67.05574
G01 X17.83234 Y67.13519
G01 X17.70206 Y67.24213
G01 X17.59515 Y67.37240
G01 X17.51570 Y67.52104
G01 X17.46681 Y67.68231
G01 X17.45027 Y67.85002
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X18.44069 Y64.84360 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X18.44069 Y64.84360
G01 X18.44069 Y65.21741
G01 X18.72893 Y65.21741
G01 X18.79744 Y65.18315
G01 X18.82787 Y65.15272
G01 X18.86213 Y65.08422
G01 X18.86213 Y64.97680
G01 X18.82787 Y64.90827
G01 X18.79746 Y64.87784
G01 X18.72896 Y64.84360
G01 X18.44069 Y64.84360
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X18.29071 Y64.29240 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X18.29071 Y64.29240
G01 X18.29071 Y65.29240
G01 X18.29213 Y65.30705
G01 X18.30333 Y65.33408
G01 X18.32403 Y65.35478
G01 X18.35106 Y65.36598
G01 X18.36571 Y65.36740
G01 X18.76388 Y65.36540
G01 X18.88573 Y65.30563
G01 X18.94252 Y65.25018
G01 X18.95657 Y65.23070
G01 X19.01011 Y65.11917
G01 X19.01212 Y64.95907
G01 X19.00422 Y64.92554
G01 X18.95034 Y64.81998
G01 X18.89490 Y64.76319
G01 X18.87541 Y64.74912
G01 X18.78019 Y64.70152
G01 X18.74773 Y64.69374
G01 X19.00577 Y64.32260
G01 X19.01212 Y64.29405
G01 X19.00701 Y64.26522
G01 X18.99129 Y64.24053
G01 X18.96731 Y64.22377
G01 X18.93876 Y64.21742
G01 X18.90993 Y64.22252
G01 X18.88524 Y64.23824
G01 X18.56472 Y64.69362
G01 X18.44069 Y64.69362
G01 X18.44069 Y64.29240
G01 X18.43927 Y64.27777
G01 X18.42807 Y64.25074
G01 X18.40737 Y64.23004
G01 X18.38034 Y64.21884
G01 X18.35106 Y64.21884
G01 X18.32403 Y64.23004
G01 X18.30333 Y64.25074
G01 X18.29213 Y64.27777
G01 X18.29071 Y64.29240
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X17.33028 Y62.84091 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X17.33028 Y62.84091
G01 X17.35025 Y63.03192
G01 X17.40260 Y63.20452
G01 X17.49210 Y63.37444
G01 X17.62137 Y63.53192
G01 X17.77056 Y63.65290
G01 X17.94049 Y63.74241
G01 X18.11308 Y63.79476
G01 X18.31585 Y63.81473
G01 X18.50686 Y63.79476
G01 X18.67945 Y63.74241
G01 X18.85916 Y63.64635
G01 X18.99858 Y63.53192
G01 X19.12129 Y63.38422
G01 X19.21735 Y63.20452
G01 X19.26972 Y63.03192
G01 X19.28435 Y62.89504
G01 X19.86167 Y62.89387
G01 X19.89240 Y62.87747
G01 X19.90541 Y62.85798
G01 X19.90998 Y62.83502
G01 X19.90541 Y62.81209
G01 X19.88331 Y62.78514
G01 X19.84999 Y62.77503
G01 X19.28435 Y62.77503
G01 X19.26972 Y62.63810
G01 X19.21735 Y62.46553
G01 X19.12131 Y62.28585
G01 X18.99858 Y62.13812
G01 X18.85916 Y62.02370
G01 X18.69032 Y61.93213
G01 X18.50686 Y61.87528
G01 X18.31585 Y61.85532
G01 X18.12462 Y61.87300
G01 X17.94049 Y61.92763
G01 X17.76079 Y62.02370
G01 X17.61303 Y62.14643
G01 X17.49863 Y62.28585
G01 X17.40709 Y62.45468
G01 X17.35025 Y62.63812
G01 X17.33028 Y62.84091
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X17.45027 Y62.83502 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X17.45027 Y62.83502
G01 X17.46681 Y63.00274
G01 X17.51570 Y63.16403
G01 X17.59515 Y63.31267
G01 X17.70206 Y63.44292
G01 X17.83234 Y63.54985
G01 X17.98098 Y63.62931
G01 X18.14227 Y63.67820
G01 X18.30998 Y63.69474
G01 X18.47768 Y63.67820
G01 X18.63897 Y63.62931
G01 X18.78761 Y63.54985
G01 X18.91788 Y63.44292
G01 X19.02479 Y63.31267
G01 X19.10424 Y63.16403
G01 X19.15316 Y63.00274
G01 X19.16970 Y62.83502
G01 X19.15316 Y62.66731
G01 X19.10424 Y62.50604
G01 X19.02479 Y62.35740
G01 X18.91788 Y62.22712
G01 X18.78761 Y62.12019
G01 X18.63897 Y62.04074
G01 X18.47768 Y61.99184
G01 X18.30998 Y61.97531
G01 X18.14227 Y61.99184
G01 X17.98098 Y62.04074
G01 X17.83234 Y62.12019
G01 X17.70206 Y62.22712
G01 X17.59515 Y62.35740
G01 X17.51570 Y62.50604
G01 X17.46681 Y62.66731
G01 X17.45027 Y62.83502
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X19.24308 Y64.29240 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X19.24308 Y64.29240
G01 X19.24450 Y64.27777
G01 X19.25570 Y64.25074
G01 X19.27640 Y64.23004
G01 X19.30343 Y64.21884
G01 X19.88951 Y64.21742
G01 X19.90414 Y64.21884
G01 X19.93117 Y64.23004
G01 X19.95187 Y64.25074
G01 X19.96307 Y64.27777
G01 X19.96307 Y64.30705
G01 X19.95187 Y64.33408
G01 X19.93117 Y64.35478
G01 X19.91819 Y64.36169
G01 X19.88951 Y64.36740
G01 X19.67877 Y64.36740
G01 X19.67877 Y65.29240
G01 X19.67305 Y65.32112
G01 X19.65679 Y65.34546
G01 X19.64542 Y65.35478
G01 X19.61836 Y65.36598
G01 X19.58908 Y65.36595
G01 X19.57501 Y65.36169
G01 X19.55067 Y65.34538
G01 X19.45027 Y65.19735
G01 X19.36886 Y65.11594
G01 X19.27209 Y65.06593
G01 X19.25291 Y65.04383
G01 X19.24691 Y65.03039
G01 X19.24326 Y65.00136
G01 X19.24575 Y64.98686
G01 X19.25883 Y64.96070
G01 X19.28093 Y64.94152
G01 X19.30871 Y64.93227
G01 X19.32339 Y64.93187
G01 X19.35161 Y64.93962
G01 X19.45715 Y64.99346
G01 X19.52878 Y65.06372
G01 X19.52878 Y64.36740
G01 X19.30343 Y64.36598
G01 X19.27640 Y64.35478
G01 X19.25570 Y64.33408
G01 X19.24879 Y64.32110
G01 X19.24308 Y64.29240
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X20.14925 Y64.27777 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X20.14925 Y64.27777
G01 X20.14925 Y64.30705
G01 X20.16045 Y64.33408
G01 X20.72873 Y64.90433
G01 X20.76688 Y65.01886
G01 X20.76688 Y65.08424
G01 X20.73264 Y65.15275
G01 X20.70221 Y65.18315
G01 X20.63368 Y65.21741
G01 X20.43101 Y65.21741
G01 X20.36251 Y65.18315
G01 X20.31211 Y65.13479
G01 X20.28509 Y65.12359
G01 X20.27046 Y65.12217
G01 X20.25580 Y65.12359
G01 X20.22878 Y65.13479
G01 X20.20808 Y65.15549
G01 X20.19687 Y65.18252
G01 X20.19545 Y65.19715
G01 X20.20117 Y65.22585
G01 X20.21742 Y65.25018
G01 X20.27422 Y65.30563
G01 X20.39606 Y65.36540
G01 X20.65141 Y65.36740
G01 X20.68494 Y65.35950
G01 X20.79050 Y65.30563
G01 X20.85512 Y65.24101
G01 X20.91486 Y65.11917
G01 X20.91686 Y65.00667
G01 X20.91303 Y64.98297
G01 X20.86543 Y64.84012
G01 X20.84729 Y64.81081
G01 X20.40388 Y64.36740
G01 X20.85651 Y64.36598
G01 X20.88354 Y64.35478
G01 X20.90424 Y64.33408
G01 X20.91544 Y64.30705
G01 X20.91686 Y64.29240
G01 X20.91115 Y64.26372
G01 X20.90424 Y64.25074
G01 X20.88354 Y64.23004
G01 X20.85651 Y64.21884
G01 X20.84188 Y64.21742
G01 X20.22283 Y64.21742
G01 X20.19413 Y64.22313
G01 X20.16980 Y64.23939
G01 X20.16045 Y64.25074
G01 X20.14925 Y64.27777
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X25.34998 Y59.33500 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X25.34998 Y59.33500
G01 X25.35455 Y59.31207
G01 X25.36755 Y59.29259
G01 X25.39829 Y59.27618
G01 X25.97560 Y59.27501
G01 X25.99023 Y59.13813
G01 X26.04258 Y58.96554
G01 X26.13865 Y58.78583
G01 X26.26138 Y58.63813
G01 X26.40080 Y58.52370
G01 X26.58050 Y58.42764
G01 X26.76460 Y58.37300
G01 X26.94411 Y58.35533
G01 X27.14687 Y58.37529
G01 X27.31947 Y58.42764
G01 X27.48939 Y58.51715
G01 X27.63857 Y58.63813
G01 X27.76785 Y58.79561
G01 X27.85736 Y58.96554
G01 X27.90971 Y59.13813
G01 X27.92968 Y59.32914
G01 X27.91200 Y59.52040
G01 X27.85287 Y59.71537
G01 X27.76130 Y59.88420
G01 X27.64687 Y60.02362
G01 X27.49917 Y60.14636
G01 X27.31947 Y60.24242
G01 X27.13534 Y60.29705
G01 X26.94411 Y60.31473
G01 X26.75307 Y60.29477
G01 X26.56963 Y60.23792
G01 X26.40080 Y60.14636
G01 X26.26138 Y60.03193
G01 X26.13865 Y59.88420
G01 X26.04258 Y59.70450
G01 X25.99023 Y59.53193
G01 X25.97560 Y59.39502
G01 X25.41000 Y59.39502
G01 X25.37665 Y59.38491
G01 X25.35455 Y59.35797
G01 X25.34998 Y59.33500
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X26.09026 Y59.33503 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X26.09026 Y59.33503
G01 X26.10679 Y59.16731
G01 X26.15569 Y59.00602
G01 X26.23514 Y58.85738
G01 X26.34207 Y58.72713
G01 X26.47235 Y58.62020
G01 X26.62099 Y58.54075
G01 X26.78226 Y58.49185
G01 X26.94997 Y58.47532
G01 X27.11769 Y58.49185
G01 X27.27898 Y58.54075
G01 X27.42762 Y58.62020
G01 X27.55787 Y58.72713
G01 X27.66480 Y58.85738
G01 X27.74426 Y59.00602
G01 X27.79315 Y59.16731
G01 X27.80969 Y59.33503
G01 X27.79315 Y59.50275
G01 X27.74426 Y59.66401
G01 X27.66480 Y59.81265
G01 X27.55787 Y59.94293
G01 X27.42762 Y60.04986
G01 X27.27898 Y60.12931
G01 X27.11769 Y60.17821
G01 X26.94997 Y60.19474
G01 X26.78226 Y60.17821
G01 X26.62099 Y60.12931
G01 X26.47235 Y60.04986
G01 X26.34207 Y59.94293
G01 X26.23514 Y59.81265
G01 X26.15569 Y59.66401
G01 X26.10679 Y59.50275
G01 X26.09026 Y59.33503
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X25.01688 Y57.50359 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X25.01688 Y57.50359
G01 X25.30512 Y57.50359
G01 X25.37362 Y57.53785
G01 X25.40405 Y57.56828
G01 X25.43832 Y57.63678
G01 X25.43832 Y57.74420
G01 X25.40405 Y57.81273
G01 X25.37362 Y57.84316
G01 X25.30512 Y57.87742
G01 X25.01688 Y57.87742
G01 X25.01688 Y57.50359
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X24.86689 Y56.95238 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X24.86689 Y56.95238
G01 X24.86832 Y56.93775
G01 X24.87952 Y56.91073
G01 X24.90022 Y56.89003
G01 X24.92724 Y56.87882
G01 X24.95653 Y56.87882
G01 X24.98356 Y56.89003
G01 X25.00426 Y56.91073
G01 X25.01546 Y56.93775
G01 X25.01688 Y56.95238
G01 X25.01688 Y57.35360
G01 X25.14093 Y57.35360
G01 X25.45186 Y56.90938
G01 X25.47301 Y56.88914
G01 X25.48612 Y56.88251
G01 X25.51492 Y56.87740
G01 X25.54350 Y56.88375
G01 X25.56748 Y56.90052
G01 X25.58320 Y56.92520
G01 X25.58830 Y56.95401
G01 X25.58195 Y56.98258
G01 X25.32394 Y57.35373
G01 X25.35638 Y57.36153
G01 X25.45160 Y57.40915
G01 X25.47108 Y57.42320
G01 X25.52653 Y57.47999
G01 X25.58038 Y57.58553
G01 X25.58830 Y57.61906
G01 X25.58630 Y57.77915
G01 X25.53278 Y57.89071
G01 X25.51871 Y57.91019
G01 X25.46191 Y57.96564
G01 X25.34007 Y58.02540
G01 X24.94190 Y58.02741
G01 X24.92724 Y58.02599
G01 X24.90022 Y58.01479
G01 X24.87952 Y57.99409
G01 X24.86832 Y57.96706
G01 X24.86689 Y57.95241
G01 X24.86689 Y56.95238
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X25.81927 Y57.14288 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X25.81927 Y57.14288
G01 X25.81927 Y57.52383
G01 X25.87329 Y57.74466
G01 X25.97471 Y57.89876
G01 X26.03171 Y57.95782
G01 X26.05119 Y57.97189
G01 X26.14644 Y58.01951
G01 X26.18000 Y58.02741
G01 X26.37047 Y58.02741
G01 X26.39915 Y58.02170
G01 X26.42348 Y58.00544
G01 X26.43974 Y57.98111
G01 X26.44545 Y57.95241
G01 X26.43974 Y57.92373
G01 X26.43283 Y57.91075
G01 X26.41213 Y57.89005
G01 X26.38510 Y57.87885
G01 X26.19770 Y57.87742
G01 X26.12917 Y57.84316
G01 X26.09539 Y57.80938
G01 X26.01149 Y57.68352
G01 X25.99298 Y57.60943
G01 X26.05119 Y57.63854
G01 X26.08475 Y57.64644
G01 X26.27522 Y57.64644
G01 X26.30872 Y57.63854
G01 X26.41431 Y57.58469
G01 X26.47111 Y57.52924
G01 X26.48515 Y57.50976
G01 X26.53278 Y57.41451
G01 X26.54068 Y57.38096
G01 X26.54068 Y57.14288
G01 X26.53278 Y57.10935
G01 X26.47890 Y57.00379
G01 X26.42351 Y56.94700
G01 X26.40400 Y56.93293
G01 X26.29244 Y56.87941
G01 X26.06750 Y56.87941
G01 X25.95597 Y56.93295
G01 X25.93649 Y56.94700
G01 X25.88104 Y57.00379
G01 X25.82717 Y57.10935
G01 X25.81927 Y57.14288
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X25.96925 Y57.16061 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X25.96925 Y57.16061
G01 X25.96925 Y57.36325
G01 X26.00352 Y57.43178
G01 X26.03392 Y57.46221
G01 X26.10243 Y57.49645
G01 X26.25752 Y57.49645
G01 X26.32602 Y57.46221
G01 X26.35643 Y57.43181
G01 X26.39069 Y57.36325
G01 X26.39069 Y57.16061
G01 X26.35643 Y57.09206
G01 X26.32602 Y57.06165
G01 X26.25749 Y57.02739
G01 X26.10245 Y57.02739
G01 X26.03395 Y57.06165
G01 X26.00352 Y57.09208
G01 X25.96925 Y57.16061
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X39.37995 Y66.57004 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X39.37995 Y66.57004
G01 X59.69997 Y66.57004
G01 X59.69997 Y68.10565
G01 X59.54747 Y68.12183
G01 X59.34902 Y68.18322
G01 X59.16634 Y68.28218
G01 X59.00647 Y68.41487
G01 X58.87559 Y68.57618
G01 X58.77869 Y68.75993
G01 X58.71948 Y68.95906
G01 X58.70028 Y69.16590
G01 X58.72177 Y69.37252
G01 X58.77869 Y69.56013
G01 X58.87559 Y69.74387
G01 X59.00647 Y69.90519
G01 X59.16634 Y70.03788
G01 X59.34902 Y70.13684
G01 X59.54747 Y70.19823
G01 X59.69997 Y70.21441
G01 X59.69997 Y71.75002
G01 X39.37995 Y71.75002
G01 X39.37995 Y66.57004
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X49.53997 Y55.60001 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X49.53997 Y55.60001
G01 X49.54454 Y55.62297
G01 X49.55755 Y55.64245
G01 X49.57703 Y55.65546
G01 X49.59999 Y55.66003
G01 X54.09998 Y55.66003
G01 X54.12292 Y55.65546
G01 X54.14240 Y55.64245
G01 X54.15540 Y55.62297
G01 X54.15998 Y55.60001
G01 X54.15540 Y55.57707
G01 X54.14240 Y55.55759
G01 X54.12292 Y55.54459
G01 X54.09998 Y55.54002
G01 X49.59999 Y55.54002
G01 X49.57703 Y55.54459
G01 X49.55755 Y55.55759
G01 X49.54454 Y55.57707
G01 X49.53997 Y55.60001
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X55.28997 Y51.60002 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X55.28997 Y51.60002
G01 X55.29454 Y51.57708
G01 X55.30755 Y51.55760
G01 X55.32703 Y51.54460
G01 X55.34999 Y51.54002
G01 X55.37293 Y51.54460
G01 X55.39241 Y51.55760
G01 X55.40541 Y51.57708
G01 X55.40999 Y51.60002
G01 X55.40999 Y53.10001
G01 X55.40541 Y53.12298
G01 X55.39241 Y53.14246
G01 X55.37293 Y53.15546
G01 X55.34999 Y53.16004
G01 X55.32703 Y53.15546
G01 X55.30755 Y53.14246
G01 X55.29454 Y53.12298
G01 X55.28997 Y53.10001
G01 X55.28997 Y51.60002
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X52.53748 Y48.36109 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X52.53748 Y48.36109
G01 X52.54672 Y48.38885
G01 X52.56590 Y48.41095
G01 X52.66270 Y48.46093
G01 X52.74408 Y48.54234
G01 X52.84449 Y48.69037
G01 X52.86882 Y48.70668
G01 X52.88289 Y48.71095
G01 X52.91218 Y48.71097
G01 X52.93923 Y48.69977
G01 X52.95993 Y48.67909
G01 X52.96686 Y48.66611
G01 X52.97258 Y48.63739
G01 X52.97258 Y47.71240
G01 X53.18332 Y47.71240
G01 X53.19795 Y47.71097
G01 X53.22498 Y47.69977
G01 X53.24568 Y47.67907
G01 X53.25259 Y47.66609
G01 X53.25830 Y47.63739
G01 X53.25688 Y47.62276
G01 X53.24568 Y47.59573
G01 X53.23633 Y47.58438
G01 X53.22498 Y47.57503
G01 X53.19795 Y47.56383
G01 X52.61190 Y47.56241
G01 X52.59724 Y47.56383
G01 X52.57022 Y47.57503
G01 X52.54951 Y47.59573
G01 X52.53831 Y47.62276
G01 X52.53831 Y47.65205
G01 X52.54951 Y47.67907
G01 X52.57022 Y47.69977
G01 X52.58320 Y47.70668
G01 X52.61190 Y47.71240
G01 X52.82259 Y47.71240
G01 X52.82259 Y48.40871
G01 X52.75096 Y48.33845
G01 X52.64543 Y48.28461
G01 X52.61721 Y48.27689
G01 X52.58815 Y48.28054
G01 X52.56275 Y48.29505
G01 X52.55264 Y48.30571
G01 X52.53956 Y48.33190
G01 X52.53748 Y48.36109
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X51.34736 Y48.64927 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X51.34736 Y48.64927
G01 X51.35754 Y48.67671
G01 X51.36643 Y48.68842
G01 X51.39013 Y48.70556
G01 X51.40405 Y48.71036
G01 X51.43329 Y48.71145
G01 X51.44751 Y48.70772
G01 X51.47243 Y48.69238
G01 X51.48957 Y48.66868
G01 X51.66361 Y47.94392
G01 X51.77751 Y48.37102
G01 X51.79092 Y48.39792
G01 X51.80136 Y48.40879
G01 X51.82765 Y48.42329
G01 X51.84243 Y48.42631
G01 X51.85754 Y48.42631
G01 X51.88619 Y48.41737
G01 X51.89861 Y48.40879
G01 X51.91711 Y48.38514
G01 X52.03633 Y47.94394
G01 X52.21037 Y48.66868
G01 X52.22752 Y48.69238
G01 X52.25244 Y48.70772
G01 X52.26666 Y48.71145
G01 X52.29590 Y48.71036
G01 X52.32252 Y48.69817
G01 X52.33351 Y48.68842
G01 X52.34885 Y48.66350
G01 X52.35259 Y48.64927
G01 X52.35150 Y48.62004
G01 X52.11342 Y47.62004
G01 X52.10057 Y47.59256
G01 X52.07789 Y47.57242
G01 X52.04908 Y47.56289
G01 X52.01886 Y47.56558
G01 X51.99219 Y47.58001
G01 X51.97339 Y47.60381
G01 X51.84997 Y48.06063
G01 X51.72655 Y47.60381
G01 X51.70776 Y47.58001
G01 X51.68106 Y47.56558
G01 X51.66610 Y47.56269
G01 X51.63598 Y47.56619
G01 X51.62206 Y47.57242
G01 X51.59938 Y47.59256
G01 X51.58652 Y47.62004
G01 X51.34845 Y48.62004
G01 X51.34736 Y48.64927
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X50.44165 Y48.35169 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X50.44165 Y48.35169
G01 X50.44365 Y48.46416
G01 X50.50342 Y48.58603
G01 X50.56804 Y48.65062
G01 X50.68988 Y48.71039
G01 X50.95724 Y48.71143
G01 X51.12521 Y48.65494
G01 X51.14731 Y48.63576
G01 X51.16039 Y48.60957
G01 X51.16247 Y48.58039
G01 X51.15323 Y48.55263
G01 X51.13405 Y48.53053
G01 X51.12160 Y48.52268
G01 X51.09338 Y48.51496
G01 X51.06435 Y48.51862
G01 X50.93303 Y48.56241
G01 X50.72483 Y48.56241
G01 X50.65630 Y48.52814
G01 X50.62590 Y48.49774
G01 X50.59163 Y48.42921
G01 X50.59163 Y48.36942
G01 X50.62590 Y48.30089
G01 X50.65630 Y48.27046
G01 X50.73329 Y48.23198
G01 X50.93113 Y48.18070
G01 X51.03669 Y48.12682
G01 X51.10131 Y48.06220
G01 X51.15516 Y47.95667
G01 X51.16306 Y47.92311
G01 X51.16105 Y47.81064
G01 X51.10131 Y47.68880
G01 X51.03669 Y47.62418
G01 X50.91482 Y47.56442
G01 X50.64746 Y47.56337
G01 X50.47949 Y47.61986
G01 X50.45739 Y47.63904
G01 X50.44431 Y47.66523
G01 X50.44223 Y47.69441
G01 X50.45147 Y47.72217
G01 X50.47065 Y47.74427
G01 X50.48310 Y47.75212
G01 X50.51132 Y47.75984
G01 X50.54035 Y47.75618
G01 X50.67167 Y47.71240
G01 X50.87987 Y47.71240
G01 X50.94840 Y47.74666
G01 X50.97883 Y47.77706
G01 X51.01307 Y47.84557
G01 X51.01307 Y47.90544
G01 X50.97883 Y47.97394
G01 X50.94840 Y48.00434
G01 X50.87141 Y48.04285
G01 X50.67357 Y48.09413
G01 X50.56804 Y48.14798
G01 X50.50342 Y48.21260
G01 X50.44954 Y48.31816
G01 X50.44165 Y48.35169
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X49.53997 Y49.10002 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X49.53997 Y49.10002
G01 X49.54454 Y49.07709
G01 X49.55755 Y49.05760
G01 X49.57703 Y49.04460
G01 X49.59999 Y49.04003
G01 X54.09998 Y49.04003
G01 X54.12292 Y49.04460
G01 X54.14240 Y49.05760
G01 X54.15540 Y49.07709
G01 X54.15998 Y49.10002
G01 X54.15540 Y49.12298
G01 X54.14240 Y49.14247
G01 X54.12292 Y49.15547
G01 X54.09998 Y49.16004
G01 X49.59999 Y49.16004
G01 X49.57703 Y49.15547
G01 X49.55755 Y49.14247
G01 X49.54454 Y49.12298
G01 X49.53997 Y49.10002
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X48.28996 Y51.60002 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X48.28996 Y51.60002
G01 X48.28996 Y53.10001
G01 X48.29453 Y53.12298
G01 X48.30754 Y53.14246
G01 X48.32702 Y53.15546
G01 X48.34998 Y53.16004
G01 X48.37292 Y53.15546
G01 X48.39240 Y53.14246
G01 X48.40540 Y53.12298
G01 X48.40998 Y53.10001
G01 X48.40998 Y51.60002
G01 X48.40540 Y51.57708
G01 X48.39240 Y51.55760
G01 X48.37292 Y51.54460
G01 X48.34998 Y51.54002
G01 X48.32702 Y51.54460
G01 X48.30754 Y51.55760
G01 X48.29453 Y51.57708
G01 X48.28996 Y51.60002
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X43.59025 Y49.83502 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X43.59025 Y49.83502
G01 X43.60678 Y49.66731
G01 X43.65570 Y49.50604
G01 X43.73516 Y49.35740
G01 X43.84206 Y49.22712
G01 X43.97234 Y49.12019
G01 X44.12098 Y49.04074
G01 X44.28227 Y48.99184
G01 X44.44999 Y48.97531
G01 X44.61768 Y48.99184
G01 X44.77897 Y49.04074
G01 X44.92761 Y49.12019
G01 X45.05789 Y49.22712
G01 X45.16480 Y49.35740
G01 X45.24425 Y49.50604
G01 X45.29314 Y49.66731
G01 X45.30968 Y49.83502
G01 X45.29314 Y50.00274
G01 X45.24425 Y50.16403
G01 X45.16480 Y50.31267
G01 X45.05789 Y50.44292
G01 X44.92761 Y50.54985
G01 X44.77897 Y50.62931
G01 X44.61768 Y50.67820
G01 X44.44999 Y50.69474
G01 X44.28227 Y50.67820
G01 X44.12098 Y50.62931
G01 X43.97234 Y50.54985
G01 X43.84206 Y50.44292
G01 X43.73516 Y50.31267
G01 X43.65570 Y50.16403
G01 X43.60678 Y50.00274
G01 X43.59025 Y49.83502
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X43.47026 Y49.82916 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X43.47026 Y49.82916
G01 X43.48794 Y50.02039
G01 X43.54260 Y50.20452
G01 X43.63211 Y50.37444
G01 X43.75306 Y50.52362
G01 X43.90079 Y50.64635
G01 X44.06962 Y50.73792
G01 X44.25309 Y50.79476
G01 X44.38997 Y50.80939
G01 X44.38997 Y51.37502
G01 X44.39454 Y51.39799
G01 X44.40754 Y51.41747
G01 X44.42703 Y51.43047
G01 X44.44999 Y51.43504
G01 X44.47292 Y51.43047
G01 X44.49241 Y51.41747
G01 X44.50541 Y51.39799
G01 X44.50998 Y51.37502
G01 X44.50998 Y50.80939
G01 X44.64686 Y50.79476
G01 X44.83033 Y50.73792
G01 X44.99916 Y50.64635
G01 X45.14689 Y50.52362
G01 X45.26784 Y50.37444
G01 X45.35286 Y50.21539
G01 X45.40970 Y50.03192
G01 X45.42967 Y49.84092
G01 X45.41199 Y49.64965
G01 X45.35735 Y49.46555
G01 X45.26784 Y49.29563
G01 X45.14691 Y49.14643
G01 X44.99916 Y49.02370
G01 X44.83033 Y48.93213
G01 X44.64686 Y48.87528
G01 X44.45586 Y48.85532
G01 X44.26462 Y48.87300
G01 X44.08049 Y48.92763
G01 X43.91057 Y49.01714
G01 X43.76137 Y49.13812
G01 X43.63864 Y49.28585
G01 X43.54709 Y49.45468
G01 X43.49022 Y49.63810
G01 X43.47026 Y49.82916
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X42.06760 Y50.44193 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X42.06760 Y50.44193
G01 X42.06760 Y50.73019
G01 X42.10183 Y50.79870
G01 X42.13226 Y50.82910
G01 X42.20079 Y50.86337
G01 X42.30821 Y50.86337
G01 X42.37674 Y50.82910
G01 X42.40714 Y50.79870
G01 X42.44141 Y50.73017
G01 X42.44141 Y50.44193
G01 X42.06760 Y50.44193
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X41.91761 Y50.36692 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X41.91761 Y50.36692
G01 X41.91962 Y50.76512
G01 X41.97936 Y50.88696
G01 X42.03480 Y50.94376
G01 X42.05429 Y50.95783
G01 X42.16584 Y51.01135
G01 X42.32594 Y51.01335
G01 X42.35947 Y51.00545
G01 X42.46503 Y50.95158
G01 X42.52182 Y50.89613
G01 X42.53584 Y50.87665
G01 X42.58347 Y50.78143
G01 X42.59127 Y50.74899
G01 X42.96241 Y51.00700
G01 X42.99099 Y51.01335
G01 X43.01979 Y51.00825
G01 X43.04448 Y50.99253
G01 X43.06124 Y50.96855
G01 X43.06759 Y50.93997
G01 X43.06249 Y50.91117
G01 X43.05586 Y50.89806
G01 X43.03561 Y50.87691
G01 X42.59139 Y50.56598
G01 X42.59139 Y50.44193
G01 X43.00724 Y50.44051
G01 X43.03427 Y50.42931
G01 X43.05497 Y50.40861
G01 X43.06617 Y50.38158
G01 X43.06617 Y50.35229
G01 X43.05497 Y50.32527
G01 X43.03427 Y50.30457
G01 X43.00724 Y50.29337
G01 X42.99261 Y50.29194
G01 X41.99261 Y50.29194
G01 X41.97796 Y50.29337
G01 X41.95093 Y50.30457
G01 X41.93023 Y50.32527
G01 X41.91903 Y50.35229
G01 X41.91761 Y50.36692
G01 X41.91962 Y51.49255
G01 X41.97311 Y51.38102
G01 X41.98718 Y51.36154
G01 X42.04397 Y51.30609
G01 X42.14954 Y51.25222
G01 X42.18309 Y51.24432
G01 X42.42119 Y51.24432
G01 X42.45472 Y51.25224
G01 X42.54994 Y51.29987
G01 X42.56942 Y51.31391
G01 X42.62487 Y51.37071
G01 X42.67872 Y51.47624
G01 X42.68664 Y51.50977
G01 X42.68664 Y51.70025
G01 X42.67874 Y51.73380
G01 X42.64961 Y51.79204
G01 X42.72370 Y51.77353
G01 X42.84956 Y51.68960
G01 X42.88334 Y51.65582
G01 X42.91761 Y51.58732
G01 X42.91903 Y51.39992
G01 X42.93023 Y51.37289
G01 X42.95093 Y51.35219
G01 X42.96391 Y51.34528
G01 X42.99261 Y51.33957
G01 X43.02129 Y51.34528
G01 X43.04562 Y51.36154
G01 X43.06188 Y51.38587
G01 X43.06759 Y51.41455
G01 X43.06759 Y51.60502
G01 X43.05967 Y51.63858
G01 X43.01204 Y51.73380
G01 X42.99800 Y51.75328
G01 X42.93897 Y51.81028
G01 X42.78484 Y51.91173
G01 X42.56404 Y51.96573
G01 X42.18309 Y51.96573
G01 X42.14956 Y51.95783
G01 X42.04397 Y51.90398
G01 X41.98718 Y51.84853
G01 X41.97311 Y51.82902
G01 X41.91962 Y51.71749
G01 X41.91962 Y51.49255
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X42.06760 Y51.52748 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X42.06760 Y51.52748
G01 X42.06760 Y51.68257
G01 X42.10183 Y51.75110
G01 X42.13224 Y51.78150
G01 X42.20077 Y51.81574
G01 X42.40349 Y51.81574
G01 X42.47199 Y51.78150
G01 X42.50239 Y51.75107
G01 X42.53666 Y51.68254
G01 X42.53666 Y51.52750
G01 X42.50239 Y51.45900
G01 X42.47196 Y51.42857
G01 X42.40346 Y51.39430
G01 X42.20079 Y51.39430
G01 X42.13226 Y51.42857
G01 X42.10183 Y51.45897
G01 X42.06760 Y51.52748
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X25.96925 Y46.66061 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X25.96925 Y46.66061
G01 X26.00352 Y46.59208
G01 X26.03392 Y46.56165
G01 X26.10243 Y46.52741
G01 X26.25752 Y46.52741
G01 X26.32602 Y46.56165
G01 X26.35643 Y46.59205
G01 X26.39069 Y46.66061
G01 X26.39069 Y46.81565
G01 X26.35643 Y46.88418
G01 X26.32602 Y46.91458
G01 X26.25749 Y46.94885
G01 X26.10245 Y46.94885
G01 X26.03395 Y46.91458
G01 X26.00352 Y46.88415
G01 X25.96925 Y46.81565
G01 X25.96925 Y46.66061
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X25.01688 Y47.00358 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X25.01688 Y47.00358
G01 X25.01688 Y47.37742
G01 X25.30512 Y47.37742
G01 X25.37362 Y47.34316
G01 X25.40405 Y47.31273
G01 X25.43832 Y47.24422
G01 X25.43832 Y47.13678
G01 X25.40405 Y47.06828
G01 X25.37362 Y47.03785
G01 X25.30512 Y47.00358
G01 X25.01688 Y47.00358
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X24.86689 Y46.45240 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X24.86689 Y46.45240
G01 X24.86689 Y47.45240
G01 X24.86832 Y47.46706
G01 X24.87952 Y47.49408
G01 X24.90022 Y47.51478
G01 X24.92724 Y47.52598
G01 X24.94190 Y47.52741
G01 X25.34007 Y47.52540
G01 X25.46191 Y47.46563
G01 X25.51871 Y47.41019
G01 X25.53275 Y47.39070
G01 X25.58630 Y47.27917
G01 X25.58830 Y47.11905
G01 X25.58038 Y47.08552
G01 X25.52653 Y46.97999
G01 X25.47108 Y46.92319
G01 X25.45160 Y46.90915
G01 X25.35638 Y46.86152
G01 X25.32394 Y46.85372
G01 X25.58195 Y46.48260
G01 X25.58830 Y46.45405
G01 X25.58320 Y46.42523
G01 X25.56748 Y46.40054
G01 X25.54350 Y46.38377
G01 X25.51495 Y46.37742
G01 X25.48612 Y46.38253
G01 X25.46143 Y46.39825
G01 X25.14093 Y46.85360
G01 X25.01688 Y46.85360
G01 X25.01688 Y46.45240
G01 X25.01546 Y46.43777
G01 X25.00426 Y46.41075
G01 X24.98356 Y46.39005
G01 X24.95653 Y46.37884
G01 X24.92724 Y46.37884
G01 X24.90022 Y46.39005
G01 X24.87952 Y46.41075
G01 X24.86832 Y46.43777
G01 X24.86689 Y46.45240
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X25.96925 Y47.23203 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X25.96925 Y47.23203
G01 X25.96925 Y47.24422
G01 X26.00352 Y47.31273
G01 X26.03395 Y47.34316
G01 X26.10245 Y47.37742
G01 X26.25749 Y47.37742
G01 X26.32602 Y47.34316
G01 X26.35643 Y47.31275
G01 X26.39069 Y47.24422
G01 X26.39069 Y47.23203
G01 X26.35643 Y47.16350
G01 X26.32602 Y47.13310
G01 X26.25749 Y47.09883
G01 X26.10245 Y47.09883
G01 X26.03392 Y47.13310
G01 X26.00352 Y47.16350
G01 X25.96925 Y47.23203
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X25.81927 Y47.21430 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X25.81927 Y47.21430
G01 X25.82717 Y47.18077
G01 X25.88104 Y47.07521
G01 X25.93108 Y47.02383
G01 X25.88104 Y46.97244
G01 X25.82127 Y46.85060
G01 X25.82127 Y46.62566
G01 X25.88104 Y46.50379
G01 X25.93649 Y46.44699
G01 X25.95597 Y46.43292
G01 X26.06750 Y46.37943
G01 X26.29244 Y46.37943
G01 X26.41431 Y46.43917
G01 X26.47890 Y46.50379
G01 X26.53867 Y46.62566
G01 X26.53867 Y46.85060
G01 X26.47890 Y46.97244
G01 X26.42889 Y47.02383
G01 X26.47890 Y47.07521
G01 X26.53278 Y47.18077
G01 X26.54068 Y47.21430
G01 X26.53867 Y47.27917
G01 X26.47890 Y47.40102
G01 X26.42351 Y47.45781
G01 X26.40400 Y47.47188
G01 X26.29244 Y47.52540
G01 X26.06750 Y47.52540
G01 X25.94566 Y47.46563
G01 X25.88886 Y47.41019
G01 X25.87482 Y47.39070
G01 X25.82127 Y47.27917
G01 X25.81927 Y47.21430
G01 X25.34998 Y48.83502
G01 X25.35455 Y48.81209
G01 X25.36755 Y48.79261
G01 X25.38703 Y48.77960
G01 X25.41000 Y48.77503
G01 X25.97560 Y48.77503
G01 X25.99023 Y48.63812
G01 X26.04708 Y48.45469
G01 X26.13865 Y48.28585
G01 X26.26138 Y48.13812
G01 X26.41058 Y48.01714
G01 X26.58050 Y47.92763
G01 X26.76460 Y47.87300
G01 X26.95587 Y47.85532
G01 X27.14687 Y47.87529
G01 X27.33034 Y47.93213
G01 X27.49917 Y48.02370
G01 X27.64687 Y48.14643
G01 X27.76785 Y48.29563
G01 X27.85736 Y48.46556
G01 X27.91200 Y48.64966
G01 X27.92968 Y48.84092
G01 X27.90971 Y49.03193
G01 X27.85287 Y49.21539
G01 X27.76130 Y49.38422
G01 X27.63857 Y49.53192
G01 X27.48939 Y49.65290
G01 X27.31947 Y49.74241
G01 X27.13534 Y49.79705
G01 X26.94411 Y49.81473
G01 X26.75307 Y49.79476
G01 X26.56963 Y49.73792
G01 X26.40080 Y49.64635
G01 X26.26138 Y49.53192
G01 X26.13865 Y49.38422
G01 X26.04708 Y49.21539
G01 X25.99023 Y49.03193
G01 X25.97560 Y48.89504
G01 X25.41000 Y48.89504
G01 X25.38703 Y48.89047
G01 X25.36755 Y48.87747
G01 X25.35455 Y48.85799
G01 X25.34998 Y48.83502
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X26.09026 Y48.83502 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X26.09026 Y48.83502
G01 X26.10679 Y49.00274
G01 X26.15569 Y49.16403
G01 X26.23514 Y49.31267
G01 X26.34207 Y49.44292
G01 X26.47235 Y49.54986
G01 X26.62099 Y49.62931
G01 X26.78226 Y49.67820
G01 X26.94997 Y49.69474
G01 X27.11769 Y49.67820
G01 X27.27898 Y49.62931
G01 X27.42762 Y49.54986
G01 X27.55787 Y49.44292
G01 X27.66480 Y49.31267
G01 X27.74426 Y49.16403
G01 X27.79315 Y49.00274
G01 X27.80969 Y48.83502
G01 X27.79315 Y48.66731
G01 X27.74426 Y48.50604
G01 X27.66480 Y48.35740
G01 X27.55787 Y48.22713
G01 X27.42762 Y48.12019
G01 X27.27898 Y48.04074
G01 X27.11769 Y47.99185
G01 X26.94997 Y47.97531
G01 X26.78226 Y47.99185
G01 X26.62099 Y48.04074
G01 X26.47235 Y48.12019
G01 X26.34207 Y48.22713
G01 X26.23514 Y48.35740
G01 X26.15569 Y48.50604
G01 X26.10679 Y48.66731
G01 X26.09026 Y48.83502
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X24.86689 Y51.95239 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X24.86689 Y51.95239
G01 X24.86832 Y51.93776
G01 X24.87952 Y51.91074
G01 X24.90022 Y51.89004
G01 X24.92724 Y51.87883
G01 X24.95653 Y51.87883
G01 X24.98356 Y51.89004
G01 X25.00426 Y51.91074
G01 X25.01546 Y51.93776
G01 X25.01688 Y51.95239
G01 X25.01688 Y52.35361
G01 X25.14093 Y52.35361
G01 X25.45186 Y51.90939
G01 X25.47301 Y51.88915
G01 X25.48612 Y51.88252
G01 X25.51492 Y51.87741
G01 X25.54350 Y51.88376
G01 X25.56748 Y51.90053
G01 X25.58320 Y51.92521
G01 X25.58830 Y51.95402
G01 X25.58195 Y51.98259
G01 X25.32394 Y52.35374
G01 X25.35638 Y52.36154
G01 X25.45160 Y52.40916
G01 X25.47108 Y52.42318
G01 X25.52653 Y52.47998
G01 X25.58040 Y52.58554
G01 X25.58830 Y52.61907
G01 X25.58630 Y52.77916
G01 X25.53278 Y52.89072
G01 X25.51871 Y52.91023
G01 X25.46191 Y52.96562
G01 X25.34007 Y53.02539
G01 X24.94190 Y53.02740
G01 X24.92724 Y53.02597
G01 X24.90022 Y53.01477
G01 X24.87952 Y52.99407
G01 X24.86832 Y52.96705
G01 X24.86689 Y52.95239
G01 X24.86689 Y51.95239
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X25.77164 Y52.95239 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X25.77164 Y52.95239
G01 X25.77306 Y52.93776
G01 X25.78427 Y52.91073
G01 X25.80497 Y52.89003
G01 X25.83199 Y52.87883
G01 X26.39958 Y52.87741
G01 X26.01579 Y51.98196
G01 X26.00974 Y51.95333
G01 X26.01510 Y51.92455
G01 X26.03105 Y51.90002
G01 X26.05518 Y51.88346
G01 X26.08381 Y51.87741
G01 X26.11259 Y51.88277
G01 X26.13712 Y51.89872
G01 X26.15368 Y51.92285
G01 X26.58226 Y52.92285
G01 X26.58830 Y52.95168
G01 X26.58282 Y52.98058
G01 X26.56661 Y53.00517
G01 X26.54218 Y53.02163
G01 X26.51332 Y53.02740
G01 X25.84665 Y53.02740
G01 X25.83199 Y53.02597
G01 X25.80497 Y53.01477
G01 X25.78427 Y52.99407
G01 X25.77736 Y52.98109
G01 X25.77164 Y52.95239
G01 X25.34998 Y54.33501
G01 X25.35455 Y54.31208
G01 X25.36755 Y54.29260
G01 X25.39829 Y54.27619
G01 X25.97560 Y54.27502
G01 X25.99023 Y54.13814
G01 X26.04258 Y53.96555
G01 X26.13865 Y53.78584
G01 X26.25307 Y53.64642
G01 X26.40080 Y53.52369
G01 X26.58048 Y53.42765
G01 X26.76460 Y53.37299
G01 X26.94411 Y53.35531
G01 X27.13534 Y53.37299
G01 X27.33034 Y53.43215
G01 X27.48939 Y53.51716
G01 X27.63857 Y53.63811
G01 X27.76130 Y53.78584
G01 X27.85736 Y53.96555
G01 X27.90971 Y54.13814
G01 X27.92968 Y54.32915
G01 X27.90971 Y54.53191
G01 X27.85736 Y54.70451
G01 X27.76785 Y54.87443
G01 X27.64687 Y55.02363
G01 X27.48939 Y55.15289
G01 X27.31947 Y55.24240
G01 X27.13534 Y55.29704
G01 X26.94411 Y55.31472
G01 X26.75307 Y55.29475
G01 X26.56963 Y55.23791
G01 X26.40080 Y55.14637
G01 X26.26138 Y55.03196
G01 X26.13865 Y54.88421
G01 X26.04258 Y54.70451
G01 X25.99023 Y54.53191
G01 X25.97560 Y54.39503
G01 X25.41000 Y54.39503
G01 X25.37665 Y54.38492
G01 X25.35455 Y54.35798
G01 X25.34998 Y54.33501
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X26.09026 Y54.33501 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X26.09026 Y54.33501
G01 X26.10679 Y54.50273
G01 X26.15569 Y54.66402
G01 X26.23514 Y54.81266
G01 X26.34207 Y54.94294
G01 X26.47235 Y55.04985
G01 X26.62099 Y55.12930
G01 X26.78226 Y55.17819
G01 X26.94997 Y55.19473
G01 X27.11769 Y55.17819
G01 X27.27898 Y55.12930
G01 X27.42762 Y55.04985
G01 X27.55787 Y54.94294
G01 X27.66480 Y54.81266
G01 X27.74426 Y54.66402
G01 X27.79315 Y54.50273
G01 X27.80969 Y54.33501
G01 X27.79315 Y54.16732
G01 X27.74426 Y54.00603
G01 X27.66480 Y53.85739
G01 X27.55787 Y53.72712
G01 X27.42762 Y53.62021
G01 X27.27898 Y53.54076
G01 X27.11769 Y53.49184
G01 X26.94997 Y53.47530
G01 X26.78226 Y53.49184
G01 X26.62099 Y53.54076
G01 X26.47235 Y53.62021
G01 X26.34207 Y53.72712
G01 X26.23514 Y53.85739
G01 X26.15569 Y54.00603
G01 X26.10679 Y54.16732
G01 X26.09026 Y54.33501
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X25.01688 Y52.50360 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X25.01688 Y52.50360
G01 X25.01688 Y52.87741
G01 X25.30512 Y52.87741
G01 X25.37365 Y52.84314
G01 X25.40405 Y52.81274
G01 X25.43832 Y52.74421
G01 X25.43832 Y52.63680
G01 X25.40405 Y52.56827
G01 X25.37365 Y52.53786
G01 X25.30512 Y52.50360
G01 X25.01688 Y52.50360
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X16.50437 Y54.46140 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X16.50437 Y54.46140
G01 X16.50951 Y54.48424
G01 X16.52299 Y54.50339
G01 X16.54278 Y54.51591
G01 X16.56584 Y54.51990
G01 X16.58868 Y54.51477
G01 X16.60783 Y54.50128
G01 X16.62348 Y54.47017
G01 X16.75426 Y53.71546
G01 X16.77514 Y52.94109
G01 X16.68355 Y52.17187
G01 X16.67628 Y52.14962
G01 X16.66104 Y52.13184
G01 X16.62858 Y52.11919
G01 X16.60534 Y52.12199
G01 X16.58494 Y52.13347
G01 X16.57047 Y52.15186
G01 X16.56414 Y52.17441
G01 X16.65507 Y52.94233
G01 X16.63529 Y53.69928
G01 X16.50437 Y54.46140
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X5.67999 Y61.86502 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X5.67999 Y61.86502
G01 X8.21996 Y61.86502
G01 X8.21996 Y94.82503
G01 X5.67999 Y94.82503
G01 X5.67999 Y61.86502
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X5.55997 Y61.80500 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X5.55997 Y61.80500
G01 X5.56454 Y61.78206
G01 X5.57755 Y61.76258
G01 X5.59703 Y61.74958
G01 X5.61999 Y61.74501
G01 X8.27998 Y61.74501
G01 X8.30292 Y61.74958
G01 X8.32240 Y61.76258
G01 X8.33540 Y61.78206
G01 X8.33998 Y61.80500
G01 X8.33998 Y94.88502
G01 X8.33540 Y94.90798
G01 X8.32240 Y94.92746
G01 X8.30292 Y94.94047
G01 X8.27998 Y94.94504
G01 X5.61999 Y94.94504
G01 X5.59703 Y94.94047
G01 X5.57755 Y94.92746
G01 X5.56454 Y94.90798
G01 X5.55997 Y94.88502
G01 X5.55997 Y61.80500
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X6.35146 Y54.71383 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X6.35146 Y54.71383
G01 X6.35471 Y54.74853
G01 X6.72187 Y55.64499
G01 X7.24526 Y56.46018
G01 X7.89941 Y57.15993
G01 X8.68686 Y57.74260
G01 X9.55747 Y58.16747
G01 X10.47988 Y58.42573
G01 X11.32443 Y58.50381
G01 X11.35008 Y58.51385
G01 X11.40675 Y58.51133
G01 X11.45625 Y58.51471
G01 X11.48036 Y58.50656
G01 X12.23342 Y58.45708
G01 X13.08393 Y58.25835
G01 X13.88182 Y57.92784
G01 X14.62384 Y57.46699
G01 X15.28058 Y56.89109
G01 X15.29480 Y56.87250
G01 X15.30044 Y56.83813
G01 X15.28604 Y56.80641
G01 X15.26745 Y56.79218
G01 X15.24484 Y56.78614
G01 X15.21093 Y56.79409
G01 X14.55622 Y57.36772
G01 X13.83136 Y57.81885
G01 X13.04258 Y58.14560
G01 X12.21101 Y58.33910
G01 X11.40835 Y58.39096
G01 X10.50695 Y58.30872
G01 X9.59509 Y58.05340
G01 X8.74452 Y57.63722
G01 X7.98334 Y57.07397
G01 X7.33665 Y56.38223
G01 X6.82588 Y55.58487
G01 X6.46030 Y54.69275
G01 X6.43348 Y54.67052
G01 X6.39883 Y54.66692
G01 X6.36805 Y54.68320
G01 X6.35146 Y54.71383
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X6.27790 Y51.92605 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X6.27790 Y51.92605
G01 X6.27933 Y51.89125
G01 X6.60168 Y50.97066
G01 X7.08639 Y50.12420
G01 X7.70942 Y49.38796
G01 X8.47315 Y48.76373
G01 X9.32870 Y48.29527
G01 X10.24460 Y47.99304
G01 X11.21096 Y47.86035
G01 X12.18528 Y47.90594
G01 X13.14543 Y48.13183
G01 X14.02831 Y48.52009
G01 X14.83526 Y49.06809
G01 X15.52881 Y49.75395
G01 X15.54537 Y49.78458
G01 X15.54212 Y49.81927
G01 X15.52015 Y49.84630
G01 X15.48685 Y49.85656
G01 X15.45348 Y49.84660
G01 X14.76318 Y49.16418
G01 X13.97497 Y48.62771
G01 X13.10217 Y48.24389
G01 X12.17406 Y48.02555
G01 X11.22168 Y47.97998
G01 X10.27698 Y48.10874
G01 X9.37155 Y48.40752
G01 X8.53571 Y48.86627
G01 X7.79746 Y49.46967
G01 X7.18156 Y50.19751
G01 X6.70861 Y51.02539
G01 X6.38768 Y51.94147
G01 X6.36205 Y51.96507
G01 X6.33940 Y51.97093
G01 X6.31621 Y51.96768
G01 X6.28806 Y51.94713
G01 X6.27790 Y51.92605
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X10.25831 Y50.43860 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X10.25831 Y50.43860
G01 X10.25831 Y50.81241
G01 X10.54655 Y50.81241
G01 X10.61505 Y50.77815
G01 X10.64548 Y50.74772
G01 X10.67975 Y50.67922
G01 X10.67975 Y50.57180
G01 X10.64548 Y50.50327
G01 X10.61508 Y50.47284
G01 X10.54658 Y50.43860
G01 X10.25831 Y50.43860
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X10.96563 Y50.89273 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X10.96563 Y50.89273
G01 X10.96811 Y50.90721
G01 X10.98120 Y50.93339
G01 X11.00329 Y50.95257
G01 X11.03106 Y50.96182
G01 X11.04576 Y50.96222
G01 X11.07398 Y50.95450
G01 X11.08643 Y50.94665
G01 X11.10561 Y50.92456
G01 X11.37378 Y50.12458
G01 X11.63596 Y50.91112
G01 X11.65046 Y50.93654
G01 X11.67357 Y50.95450
G01 X11.70179 Y50.96222
G01 X11.73083 Y50.95857
G01 X11.75625 Y50.94406
G01 X11.77421 Y50.92095
G01 X11.78193 Y50.89273
G01 X11.77827 Y50.86370
G01 X11.44495 Y49.86370
G01 X11.43085 Y49.83876
G01 X11.40845 Y49.82090
G01 X11.38099 Y49.81275
G01 X11.35247 Y49.81552
G01 X11.32707 Y49.82875
G01 X11.30847 Y49.85054
G01 X11.30263 Y49.86370
G01 X10.96928 Y50.86370
G01 X10.96563 Y50.89273
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X11.91785 Y49.88740 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X11.91785 Y49.88740
G01 X11.92356 Y49.91610
G01 X11.93047 Y49.92908
G01 X11.95117 Y49.94978
G01 X11.97820 Y49.96098
G01 X12.20355 Y49.96240
G01 X12.20355 Y50.65872
G01 X12.13192 Y50.58846
G01 X12.02638 Y50.53461
G01 X11.99816 Y50.52687
G01 X11.98348 Y50.52727
G01 X11.95569 Y50.53652
G01 X11.93359 Y50.55570
G01 X11.92051 Y50.58186
G01 X11.91802 Y50.59636
G01 X11.92168 Y50.62539
G01 X11.92768 Y50.63883
G01 X11.94685 Y50.66093
G01 X12.04363 Y50.71094
G01 X12.12503 Y50.79235
G01 X12.22544 Y50.94038
G01 X12.24977 Y50.95669
G01 X12.26384 Y50.96095
G01 X12.29313 Y50.96098
G01 X12.32018 Y50.94978
G01 X12.33156 Y50.94046
G01 X12.34782 Y50.91612
G01 X12.35353 Y50.88740
G01 X12.35353 Y49.96240
G01 X12.56428 Y49.96240
G01 X12.59295 Y49.95669
G01 X12.60593 Y49.94978
G01 X12.62663 Y49.92908
G01 X12.63783 Y49.90205
G01 X12.63783 Y49.87277
G01 X12.62663 Y49.84574
G01 X12.60593 Y49.82504
G01 X12.57891 Y49.81384
G01 X12.56428 Y49.81242
G01 X11.97820 Y49.81384
G01 X11.95117 Y49.82504
G01 X11.93047 Y49.84574
G01 X11.91927 Y49.87277
G01 X11.91785 Y49.88740
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X10.10832 Y49.88740 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X10.10832 Y49.88740
G01 X10.10975 Y49.87277
G01 X10.12095 Y49.84574
G01 X10.14165 Y49.82504
G01 X10.16868 Y49.81384
G01 X10.19796 Y49.81384
G01 X10.22499 Y49.82504
G01 X10.24569 Y49.84574
G01 X10.25689 Y49.87277
G01 X10.25831 Y49.88740
G01 X10.25831 Y50.28862
G01 X10.38234 Y50.28862
G01 X10.70286 Y49.83324
G01 X10.72755 Y49.81752
G01 X10.75638 Y49.81242
G01 X10.78493 Y49.81877
G01 X10.80891 Y49.83553
G01 X10.82463 Y49.86022
G01 X10.82974 Y49.88905
G01 X10.82339 Y49.91760
G01 X10.56535 Y50.28874
G01 X10.59781 Y50.29652
G01 X10.69303 Y50.34411
G01 X10.71251 Y50.35819
G01 X10.76796 Y50.41498
G01 X10.82184 Y50.52054
G01 X10.82974 Y50.55407
G01 X10.82773 Y50.71417
G01 X10.77419 Y50.82570
G01 X10.76014 Y50.84518
G01 X10.70335 Y50.90063
G01 X10.58150 Y50.96039
G01 X10.18333 Y50.96240
G01 X10.16868 Y50.96098
G01 X10.14165 Y50.94978
G01 X10.12095 Y50.92908
G01 X10.10975 Y50.90205
G01 X10.10832 Y50.88740
G01 X10.10832 Y49.88740
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X6.35146 Y43.21383 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X6.35146 Y43.21383
G01 X6.36805 Y43.18319
G01 X6.39883 Y43.16691
G01 X6.43348 Y43.17052
G01 X6.46030 Y43.19274
G01 X6.82588 Y44.08487
G01 X7.33665 Y44.88223
G01 X7.98334 Y45.57397
G01 X8.74452 Y46.13721
G01 X9.59509 Y46.55339
G01 X10.50695 Y46.80871
G01 X11.40837 Y46.89096
G01 X12.21101 Y46.83912
G01 X13.04258 Y46.64560
G01 X13.83136 Y46.31885
G01 X14.55622 Y45.86772
G01 X15.21093 Y45.29409
G01 X15.24484 Y45.28614
G01 X15.26745 Y45.29218
G01 X15.28604 Y45.30641
G01 X15.30044 Y45.33813
G01 X15.29480 Y45.37250
G01 X15.28058 Y45.39109
G01 X14.62384 Y45.96698
G01 X13.88182 Y46.42784
G01 X13.08393 Y46.75835
G01 X12.23342 Y46.95710
G01 X11.48036 Y47.00655
G01 X11.45625 Y47.01471
G01 X11.40677 Y47.01133
G01 X11.35008 Y47.01384
G01 X11.32443 Y47.00381
G01 X10.47988 Y46.92573
G01 X9.55747 Y46.66746
G01 X8.68686 Y46.24260
G01 X7.89941 Y45.65992
G01 X7.24526 Y44.96018
G01 X6.72187 Y44.14499
G01 X6.35471 Y43.24852
G01 X6.35146 Y43.21383
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X6.27607 Y40.41444 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X6.27607 Y40.41444
G01 X6.28194 Y40.43710
G01 X6.30554 Y40.46273
G01 X6.33940 Y40.47093
G01 X6.36205 Y40.46506
G01 X6.38768 Y40.44147
G01 X6.70861 Y39.52539
G01 X7.18156 Y38.69750
G01 X7.79746 Y37.96967
G01 X8.53571 Y37.36626
G01 X9.37155 Y36.90751
G01 X10.27698 Y36.60873
G01 X11.22168 Y36.47998
G01 X12.17406 Y36.52555
G01 X13.10217 Y36.74389
G01 X13.97497 Y37.12771
G01 X14.76318 Y37.66418
G01 X15.45348 Y38.34660
G01 X15.48685 Y38.35656
G01 X15.52015 Y38.34630
G01 X15.54212 Y38.31927
G01 X15.54537 Y38.28458
G01 X15.52881 Y38.25394
G01 X14.83526 Y37.56809
G01 X14.02831 Y37.02009
G01 X13.14543 Y36.63182
G01 X12.18528 Y36.40594
G01 X11.21096 Y36.36035
G01 X10.24460 Y36.49304
G01 X9.32870 Y36.79527
G01 X8.47315 Y37.26372
G01 X7.70942 Y37.88795
G01 X7.08639 Y38.62420
G01 X6.60168 Y39.47065
G01 X6.27933 Y40.39125
G01 X6.27607 Y40.41444
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X10.10832 Y38.38740 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X10.10832 Y38.38740
G01 X10.10975 Y38.37276
G01 X10.12095 Y38.34574
G01 X10.14165 Y38.32504
G01 X10.16868 Y38.31384
G01 X10.19796 Y38.31384
G01 X10.22499 Y38.32504
G01 X10.24569 Y38.34574
G01 X10.25689 Y38.37276
G01 X10.25831 Y38.38740
G01 X10.25831 Y38.78861
G01 X10.38234 Y38.78861
G01 X10.70286 Y38.33324
G01 X10.72755 Y38.31752
G01 X10.75638 Y38.31241
G01 X10.78493 Y38.31876
G01 X10.80891 Y38.33553
G01 X10.82463 Y38.36022
G01 X10.82974 Y38.38905
G01 X10.82339 Y38.41760
G01 X10.56535 Y38.78874
G01 X10.59781 Y38.79651
G01 X10.69303 Y38.84411
G01 X10.71251 Y38.85818
G01 X10.76796 Y38.91498
G01 X10.82184 Y39.02054
G01 X10.82974 Y39.05407
G01 X10.82773 Y39.21417
G01 X10.77419 Y39.32570
G01 X10.76014 Y39.34518
G01 X10.70335 Y39.40063
G01 X10.58150 Y39.46039
G01 X10.18333 Y39.46240
G01 X10.16868 Y39.46098
G01 X10.14165 Y39.44978
G01 X10.12095 Y39.42907
G01 X10.10975 Y39.40205
G01 X10.10832 Y39.38739
G01 X10.10832 Y38.38740
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X10.25831 Y38.93860 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X10.25831 Y38.93860
G01 X10.54658 Y38.93860
G01 X10.61508 Y38.97284
G01 X10.64548 Y39.00327
G01 X10.67975 Y39.07180
G01 X10.67975 Y39.17921
G01 X10.64548 Y39.24772
G01 X10.61505 Y39.27815
G01 X10.54655 Y39.31241
G01 X10.25831 Y39.31241
G01 X10.25831 Y38.93860
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X10.96563 Y39.39273 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X10.96563 Y39.39273
G01 X10.96928 Y39.36369
G01 X11.30263 Y38.36370
G01 X11.30847 Y38.35054
G01 X11.32707 Y38.32875
G01 X11.35247 Y38.31551
G01 X11.38099 Y38.31274
G01 X11.40845 Y38.32090
G01 X11.43085 Y38.33875
G01 X11.44495 Y38.36370
G01 X11.77827 Y39.36369
G01 X11.78193 Y39.39273
G01 X11.77421 Y39.42095
G01 X11.75625 Y39.44406
G01 X11.73083 Y39.45856
G01 X11.70179 Y39.46222
G01 X11.67357 Y39.45450
G01 X11.65046 Y39.43654
G01 X11.63596 Y39.41112
G01 X11.37378 Y38.62458
G01 X11.10561 Y39.42455
G01 X11.08643 Y39.44665
G01 X11.07398 Y39.45450
G01 X11.04576 Y39.46222
G01 X11.03106 Y39.46182
G01 X11.00329 Y39.45257
G01 X10.98120 Y39.43339
G01 X10.96811 Y39.40721
G01 X10.96563 Y39.39273
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X16.50437 Y42.96140 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X16.50437 Y42.96140
G01 X16.50951 Y42.98424
G01 X16.52299 Y43.00339
G01 X16.54278 Y43.01591
G01 X16.56584 Y43.01990
G01 X16.58868 Y43.01477
G01 X16.60783 Y43.00128
G01 X16.62348 Y42.97016
G01 X16.75426 Y42.21545
G01 X16.77514 Y41.44108
G01 X16.68355 Y40.67187
G01 X16.67628 Y40.64962
G01 X16.66104 Y40.63184
G01 X16.62858 Y40.61919
G01 X16.60534 Y40.62199
G01 X16.58494 Y40.63347
G01 X16.57047 Y40.65186
G01 X16.56414 Y40.67441
G01 X16.65507 Y41.44233
G01 X16.63529 Y42.19927
G01 X16.50437 Y42.96140
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X11.87164 Y38.37276 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X11.87164 Y38.37276
G01 X11.87164 Y38.40205
G01 X11.88284 Y38.42908
G01 X12.45109 Y38.99936
G01 X12.48927 Y39.11386
G01 X12.48927 Y39.17921
G01 X12.45501 Y39.24772
G01 X12.42458 Y39.27815
G01 X12.35607 Y39.31241
G01 X12.15341 Y39.31241
G01 X12.08488 Y39.27815
G01 X12.03453 Y39.22981
G01 X12.00748 Y39.21861
G01 X11.99285 Y39.21716
G01 X11.96415 Y39.22285
G01 X11.95120 Y39.22979
G01 X11.93050 Y39.25046
G01 X11.91929 Y39.27751
G01 X11.91927 Y39.30677
G01 X11.92354 Y39.32085
G01 X11.93979 Y39.34518
G01 X11.99659 Y39.40063
G01 X12.11846 Y39.46039
G01 X12.37380 Y39.46240
G01 X12.40733 Y39.45447
G01 X12.51287 Y39.40063
G01 X12.57748 Y39.33601
G01 X12.63725 Y39.21417
G01 X12.63926 Y39.10167
G01 X12.63542 Y39.07797
G01 X12.58780 Y38.93512
G01 X12.56966 Y38.90581
G01 X12.12628 Y38.46240
G01 X12.57891 Y38.46098
G01 X12.60593 Y38.44978
G01 X12.62663 Y38.42908
G01 X12.63783 Y38.40205
G01 X12.63926 Y38.38740
G01 X12.63354 Y38.35872
G01 X12.62663 Y38.34574
G01 X12.60593 Y38.32504
G01 X12.57891 Y38.31384
G01 X12.56428 Y38.31241
G01 X11.94523 Y38.31241
G01 X11.91653 Y38.31813
G01 X11.90355 Y38.32504
G01 X11.88284 Y38.34574
G01 X11.87164 Y38.37276
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X6.35146 Y31.86381 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X6.35146 Y31.86381
G01 X6.36805 Y31.83318
G01 X6.39883 Y31.81690
G01 X6.43348 Y31.82050
G01 X6.46030 Y31.84273
G01 X6.82588 Y32.73485
G01 X7.33665 Y33.53224
G01 X7.98334 Y34.22395
G01 X8.74452 Y34.78720
G01 X9.59509 Y35.20338
G01 X10.50695 Y35.45872
G01 X11.40853 Y35.54097
G01 X12.21101 Y35.48910
G01 X13.04258 Y35.29561
G01 X13.83136 Y34.96886
G01 X14.55622 Y34.51771
G01 X15.21093 Y33.94410
G01 X15.23308 Y33.93655
G01 X15.26745 Y33.94219
G01 X15.28604 Y33.95642
G01 X15.30044 Y33.98814
G01 X15.29894 Y34.01151
G01 X15.28058 Y34.04110
G01 X14.62384 Y34.61697
G01 X13.88182 Y35.07785
G01 X13.08393 Y35.40836
G01 X12.23342 Y35.60709
G01 X11.48031 Y35.65659
G01 X11.45628 Y35.66469
G01 X11.40693 Y35.66134
G01 X11.35005 Y35.66385
G01 X11.32440 Y35.65380
G01 X10.47988 Y35.57574
G01 X9.55747 Y35.31745
G01 X8.68686 Y34.89258
G01 X7.89941 Y34.30991
G01 X7.23856 Y33.60158
G01 X6.72187 Y32.79498
G01 X6.35471 Y31.89851
G01 X6.35146 Y31.86381
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X6.27607 Y29.06445 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X6.27607 Y29.06445
G01 X6.28194 Y29.08711
G01 X6.30554 Y29.11274
G01 X6.33940 Y29.12094
G01 X6.36205 Y29.11507
G01 X6.38768 Y29.09148
G01 X6.70861 Y28.17538
G01 X7.18156 Y27.34751
G01 X7.79746 Y26.61968
G01 X8.53571 Y26.01627
G01 X9.37155 Y25.55752
G01 X10.27698 Y25.25874
G01 X11.22168 Y25.12997
G01 X12.17406 Y25.17556
G01 X13.10217 Y25.39387
G01 X13.97497 Y25.77772
G01 X14.76318 Y26.31417
G01 X15.45348 Y26.99661
G01 X15.48685 Y27.00657
G01 X15.52015 Y26.99631
G01 X15.54212 Y26.96928
G01 X15.54537 Y26.93459
G01 X15.52881 Y26.90395
G01 X14.83526 Y26.21808
G01 X14.02831 Y25.67010
G01 X13.14543 Y25.28181
G01 X12.19615 Y25.05748
G01 X11.22191 Y25.00985
G01 X10.24460 Y25.14305
G01 X9.32870 Y25.44528
G01 X8.47315 Y25.91373
G01 X7.70942 Y26.53796
G01 X7.08639 Y27.27421
G01 X6.60168 Y28.12064
G01 X6.27933 Y29.04126
G01 X6.27607 Y29.06445
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X7.01308 Y11.58740 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X7.01308 Y11.58740
G01 X7.01450 Y11.57277
G01 X7.02570 Y11.54574
G01 X7.04641 Y11.52504
G01 X7.05939 Y11.51813
G01 X7.08809 Y11.51242
G01 X7.10272 Y11.51384
G01 X7.12974 Y11.52504
G01 X7.15044 Y11.54574
G01 X7.16165 Y11.57277
G01 X7.16307 Y12.03622
G01 X7.58450 Y12.03622
G01 X7.58593 Y11.57277
G01 X7.59713 Y11.54574
G01 X7.61783 Y11.52504
G01 X7.63081 Y11.51813
G01 X7.65951 Y11.51242
G01 X7.67414 Y11.51384
G01 X7.70117 Y11.52504
G01 X7.72187 Y11.54574
G01 X7.73307 Y11.57277
G01 X7.73449 Y11.58740
G01 X7.73449 Y12.58740
G01 X7.73307 Y12.60205
G01 X7.72187 Y12.62908
G01 X7.70117 Y12.64978
G01 X7.67414 Y12.66098
G01 X7.64486 Y12.66098
G01 X7.61783 Y12.64978
G01 X7.59713 Y12.62908
G01 X7.59022 Y12.61610
G01 X7.58450 Y12.58740
G01 X7.58450 Y12.18620
G01 X7.16307 Y12.18620
G01 X7.16165 Y12.60205
G01 X7.15044 Y12.62908
G01 X7.12974 Y12.64978
G01 X7.11676 Y12.65669
G01 X7.08809 Y12.66240
G01 X7.07343 Y12.66098
G01 X7.04641 Y12.64978
G01 X7.02570 Y12.62908
G01 X7.01450 Y12.60205
G01 X7.01308 Y12.58740
G01 X7.01308 Y11.58740
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X8.01374 Y11.93065 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X8.01374 Y11.93065
G01 X8.26101 Y12.67218
G01 X8.28019 Y12.69428
G01 X8.30637 Y12.70736
G01 X8.33556 Y12.70944
G01 X8.36332 Y12.70020
G01 X8.37531 Y12.69169
G01 X8.39327 Y12.66857
G01 X8.40099 Y12.64035
G01 X8.40058 Y12.62565
G01 X8.19212 Y11.99573
G01 X8.48928 Y11.99573
G01 X8.49070 Y12.26873
G01 X8.50190 Y12.29575
G01 X8.52260 Y12.31645
G01 X8.54963 Y12.32766
G01 X8.57891 Y12.32766
G01 X8.60594 Y12.31645
G01 X8.61729 Y12.30711
G01 X8.62664 Y12.29575
G01 X8.63784 Y12.26873
G01 X8.63926 Y11.99573
G01 X8.70713 Y11.99573
G01 X8.73581 Y11.99001
G01 X8.74879 Y11.98310
G01 X8.76949 Y11.96240
G01 X8.78069 Y11.93538
G01 X8.78211 Y11.92072
G01 X8.77640 Y11.89205
G01 X8.76949 Y11.87907
G01 X8.74879 Y11.85837
G01 X8.72176 Y11.84716
G01 X8.63926 Y11.84574
G01 X8.63784 Y11.57277
G01 X8.62664 Y11.54574
G01 X8.60594 Y11.52504
G01 X8.57891 Y11.51384
G01 X8.56428 Y11.51242
G01 X8.54963 Y11.51384
G01 X8.52260 Y11.52504
G01 X8.50190 Y11.54574
G01 X8.49070 Y11.57277
G01 X8.48928 Y11.84574
G01 X8.07396 Y11.84706
G01 X8.04775 Y11.85750
G01 X8.03657 Y11.86621
G01 X8.02006 Y11.88910
G01 X8.01534 Y11.90246
G01 X8.01374 Y11.93065
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X10.10832 Y32.38738 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X10.10832 Y32.38738
G01 X10.10975 Y32.37275
G01 X10.12095 Y32.34573
G01 X10.14165 Y32.32502
G01 X10.16868 Y32.31382
G01 X10.19796 Y32.31382
G01 X10.22499 Y32.32502
G01 X10.24569 Y32.34573
G01 X10.25689 Y32.37275
G01 X10.25831 Y32.38738
G01 X10.25831 Y32.78860
G01 X10.38234 Y32.78860
G01 X10.70286 Y32.33323
G01 X10.72755 Y32.31751
G01 X10.75638 Y32.31240
G01 X10.78493 Y32.31875
G01 X10.80891 Y32.33551
G01 X10.82463 Y32.36020
G01 X10.82974 Y32.38903
G01 X10.82339 Y32.41758
G01 X10.56535 Y32.78873
G01 X10.59781 Y32.79652
G01 X10.69303 Y32.84415
G01 X10.71251 Y32.85820
G01 X10.76796 Y32.91499
G01 X10.82181 Y33.02053
G01 X10.82974 Y33.05406
G01 X10.82773 Y33.21415
G01 X10.77421 Y33.32571
G01 X10.76014 Y33.34519
G01 X10.70335 Y33.40064
G01 X10.58150 Y33.46040
G01 X10.18333 Y33.46241
G01 X10.16868 Y33.46099
G01 X10.14165 Y33.44979
G01 X10.12095 Y33.42909
G01 X10.10975 Y33.40206
G01 X10.10832 Y33.38741
G01 X10.10832 Y32.38738
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X10.25831 Y32.93859 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X10.25831 Y32.93859
G01 X10.54655 Y32.93859
G01 X10.61505 Y32.97285
G01 X10.64548 Y33.00328
G01 X10.67975 Y33.07178
G01 X10.67975 Y33.17920
G01 X10.64548 Y33.24773
G01 X10.61505 Y33.27816
G01 X10.54655 Y33.31242
G01 X10.25831 Y33.31242
G01 X10.25831 Y32.93859
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X10.96563 Y33.39274 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X10.96563 Y33.39274
G01 X10.96928 Y33.36371
G01 X11.30263 Y32.36368
G01 X11.31673 Y32.33874
G01 X11.32707 Y32.32873
G01 X11.35247 Y32.31550
G01 X11.38099 Y32.31273
G01 X11.40845 Y32.32088
G01 X11.43085 Y32.33874
G01 X11.44495 Y32.36368
G01 X11.77827 Y33.36371
G01 X11.78193 Y33.39274
G01 X11.77421 Y33.42096
G01 X11.75625 Y33.44407
G01 X11.73083 Y33.45858
G01 X11.70179 Y33.46223
G01 X11.67357 Y33.45451
G01 X11.65046 Y33.43655
G01 X11.63596 Y33.41113
G01 X11.37378 Y32.62457
G01 X11.10561 Y33.42457
G01 X11.08643 Y33.44666
G01 X11.07398 Y33.45451
G01 X11.06024 Y33.45974
G01 X11.03106 Y33.46183
G01 X11.01673 Y33.45858
G01 X10.99130 Y33.44407
G01 X10.98120 Y33.43340
G01 X10.96811 Y33.40722
G01 X10.96563 Y33.39274
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X11.87022 Y32.48263 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X11.87022 Y32.48263
G01 X11.87164 Y32.46800
G01 X11.88284 Y32.44098
G01 X11.94899 Y32.37417
G01 X12.07083 Y32.31441
G01 X12.39102 Y32.31441
G01 X12.50255 Y32.36795
G01 X12.52204 Y32.38200
G01 X12.57748 Y32.43879
G01 X12.63725 Y32.56066
G01 X12.63725 Y32.83320
G01 X12.58373 Y32.94476
G01 X12.56966 Y32.96424
G01 X12.51287 Y33.01969
G01 X12.39364 Y33.07849
G01 X12.62905 Y33.34964
G01 X12.63847 Y33.37648
G01 X12.63918 Y33.39076
G01 X12.63255 Y33.41842
G01 X12.61612 Y33.44161
G01 X12.60489 Y33.45047
G01 X12.59219 Y33.45703
G01 X12.56428 Y33.46241
G01 X11.94523 Y33.46241
G01 X11.91653 Y33.45670
G01 X11.89219 Y33.44044
G01 X11.88284 Y33.42909
G01 X11.87164 Y33.40206
G01 X11.87164 Y33.37277
G01 X11.88284 Y33.34575
G01 X11.89219 Y33.33440
G01 X11.90355 Y33.32505
G01 X11.93057 Y33.31385
G01 X12.39900 Y33.31242
G01 X12.17449 Y33.05583
G01 X12.16016 Y33.03125
G01 X12.15602 Y33.00310
G01 X12.16265 Y32.97544
G01 X12.16976 Y32.96307
G01 X12.17909 Y32.95225
G01 X12.20301 Y32.93683
G01 X12.23095 Y32.93145
G01 X12.35610 Y32.93145
G01 X12.42460 Y32.89721
G01 X12.45501 Y32.86678
G01 X12.48927 Y32.79825
G01 X12.48927 Y32.59561
G01 X12.45501 Y32.52708
G01 X12.42458 Y32.49665
G01 X12.35607 Y32.46239
G01 X12.10578 Y32.46239
G01 X12.03728 Y32.49665
G01 X11.98688 Y32.54501
G01 X11.95986 Y32.55622
G01 X11.93057 Y32.55622
G01 X11.90355 Y32.54501
G01 X11.88284 Y32.52431
G01 X11.87594 Y32.51133
G01 X11.87022 Y32.48263
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X16.50437 Y31.61139 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X16.50437 Y31.61139
G01 X16.50951 Y31.63422
G01 X16.52299 Y31.65337
G01 X16.54278 Y31.66589
G01 X16.56584 Y31.66988
G01 X16.59891 Y31.65896
G01 X16.61504 Y31.64199
G01 X16.62348 Y31.62015
G01 X16.75426 Y30.86546
G01 X16.77514 Y30.09109
G01 X16.68355 Y29.32188
G01 X16.67628 Y29.29963
G01 X16.66104 Y29.28185
G01 X16.62858 Y29.26920
G01 X16.60534 Y29.27200
G01 X16.58494 Y29.28348
G01 X16.57047 Y29.30187
G01 X16.56414 Y29.32442
G01 X16.65507 Y30.09234
G01 X16.63529 Y30.84928
G01 X16.50437 Y31.61139
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X22.86997 Y25.16004 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X22.86997 Y25.16004
G01 X22.86997 Y45.48001
G01 X24.40560 Y45.48001
G01 X24.42178 Y45.32751
G01 X24.48318 Y45.12906
G01 X24.58211 Y44.94639
G01 X24.71480 Y44.78652
G01 X24.87611 Y44.65563
G01 X25.05988 Y44.55873
G01 X25.25899 Y44.49955
G01 X25.46585 Y44.48032
G01 X25.67248 Y44.50184
G01 X25.87093 Y44.56323
G01 X26.04383 Y44.65563
G01 X26.20514 Y44.78652
G01 X26.33783 Y44.94639
G01 X26.43677 Y45.12906
G01 X26.49818 Y45.32751
G01 X26.51436 Y45.48001
G01 X28.04997 Y45.48001
G01 X28.04997 Y25.16004
G01 X22.86997 Y25.16004
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X22.74996 Y25.10002 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X22.74996 Y25.10002
G01 X22.75112 Y45.55172
G01 X22.76753 Y45.58245
G01 X22.78701 Y45.59546
G01 X22.80998 Y45.60003
G01 X24.45999 Y45.60003
G01 X24.48447 Y45.59480
G01 X24.50471 Y45.58001
G01 X24.51714 Y45.55825
G01 X24.53834 Y45.35670
G01 X24.59179 Y45.18042
G01 X24.67863 Y45.01794
G01 X24.79549 Y44.87555
G01 X24.93789 Y44.75868
G01 X25.10037 Y44.67184
G01 X25.27665 Y44.61840
G01 X25.45998 Y44.60031
G01 X25.64329 Y44.61840
G01 X25.81957 Y44.67184
G01 X25.98205 Y44.75868
G01 X26.12445 Y44.87555
G01 X26.24131 Y45.01794
G01 X26.32816 Y45.18042
G01 X26.38162 Y45.35670
G01 X26.40235 Y45.55672
G01 X26.41223 Y45.57636
G01 X26.43837 Y45.59599
G01 X26.45998 Y45.60003
G01 X28.12167 Y45.59886
G01 X28.15241 Y45.58245
G01 X28.16541 Y45.56297
G01 X28.16999 Y45.54001
G01 X28.16882 Y25.08834
G01 X28.15241 Y25.05760
G01 X28.13293 Y25.04460
G01 X28.10999 Y25.04003
G01 X22.79827 Y25.04119
G01 X22.76753 Y25.05760
G01 X22.75453 Y25.07708
G01 X22.74996 Y25.10002
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X24.51307 Y30.38739 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X24.51307 Y30.38739
G01 X24.51879 Y30.41609
G01 X24.52569 Y30.42907
G01 X24.54640 Y30.44977
G01 X24.57342 Y30.46097
G01 X24.60271 Y30.46097
G01 X24.62973 Y30.44977
G01 X24.65043 Y30.42907
G01 X24.66164 Y30.40204
G01 X24.66306 Y29.59559
G01 X24.69732 Y29.52709
G01 X24.72775 Y29.49666
G01 X24.79626 Y29.46239
G01 X24.95130 Y29.46239
G01 X25.01983 Y29.49666
G01 X25.05026 Y29.52706
G01 X25.08449 Y29.59557
G01 X25.08592 Y30.40204
G01 X25.09712 Y30.42907
G01 X25.11782 Y30.44977
G01 X25.14485 Y30.46097
G01 X25.15950 Y30.46239
G01 X25.18818 Y30.45668
G01 X25.20116 Y30.44977
G01 X25.22186 Y30.42907
G01 X25.23306 Y30.40204
G01 X25.23448 Y30.38739
G01 X25.23448 Y29.57786
G01 X25.22658 Y29.54433
G01 X25.17898 Y29.44911
G01 X25.16491 Y29.42963
G01 X25.10812 Y29.37418
G01 X25.00255 Y29.32031
G01 X24.96903 Y29.31241
G01 X24.76131 Y29.31441
G01 X24.64977 Y29.36796
G01 X24.63029 Y29.38200
G01 X24.57484 Y29.43880
G01 X24.51508 Y29.56064
G01 X24.51307 Y30.38739
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X25.46689 Y29.46803 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X25.46689 Y29.46803
G01 X25.47809 Y29.44101
G01 X25.54421 Y29.37418
G01 X25.66608 Y29.31441
G01 X25.98625 Y29.31441
G01 X26.09780 Y29.36793
G01 X26.11728 Y29.38200
G01 X26.17273 Y29.43880
G01 X26.23247 Y29.56064
G01 X26.23247 Y29.83321
G01 X26.17898 Y29.94474
G01 X26.16491 Y29.96427
G01 X26.10811 Y30.01967
G01 X25.98886 Y30.07850
G01 X26.22427 Y30.34962
G01 X26.23369 Y30.37646
G01 X26.23440 Y30.39074
G01 X26.22777 Y30.41840
G01 X26.21134 Y30.44159
G01 X26.20011 Y30.45045
G01 X26.17370 Y30.46105
G01 X26.15950 Y30.46239
G01 X25.54048 Y30.46239
G01 X25.51177 Y30.45668
G01 X25.48744 Y30.44042
G01 X25.47809 Y30.42907
G01 X25.46689 Y30.40204
G01 X25.46689 Y30.37276
G01 X25.47809 Y30.34573
G01 X25.48744 Y30.33438
G01 X25.49879 Y30.32503
G01 X25.52582 Y30.31383
G01 X25.99420 Y30.31240
G01 X25.76971 Y30.05584
G01 X25.75539 Y30.03125
G01 X25.75124 Y30.00311
G01 X25.75787 Y29.97545
G01 X25.76499 Y29.96308
G01 X25.77431 Y29.95226
G01 X25.79823 Y29.93684
G01 X25.82617 Y29.93146
G01 X25.95130 Y29.93146
G01 X26.01985 Y29.89719
G01 X26.05025 Y29.86679
G01 X26.08449 Y29.79828
G01 X26.08449 Y29.59557
G01 X26.05025 Y29.52706
G01 X26.01982 Y29.49666
G01 X25.95130 Y29.46239
G01 X25.70103 Y29.46239
G01 X25.63250 Y29.49666
G01 X25.58216 Y29.54499
G01 X25.55511 Y29.55620
G01 X25.52585 Y29.55622
G01 X25.49882 Y29.54502
G01 X25.48744 Y29.53570
G01 X25.47118 Y29.51137
G01 X25.46692 Y29.49729
G01 X25.46689 Y29.46803
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X36.24998 Y25.10002 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X36.24998 Y25.10002
G01 X36.25115 Y45.55172
G01 X36.26756 Y45.58245
G01 X36.28704 Y45.59546
G01 X36.31000 Y45.60003
G01 X37.95998 Y45.60003
G01 X37.98447 Y45.59480
G01 X38.00471 Y45.58001
G01 X38.01713 Y45.55825
G01 X38.03834 Y45.35670
G01 X38.09178 Y45.18042
G01 X38.17863 Y45.01794
G01 X38.29549 Y44.87555
G01 X38.43788 Y44.75868
G01 X38.60037 Y44.67186
G01 X38.77664 Y44.61840
G01 X38.95998 Y44.60031
G01 X39.14329 Y44.61840
G01 X39.31957 Y44.67184
G01 X39.48203 Y44.75868
G01 X39.62442 Y44.87555
G01 X39.74129 Y45.01794
G01 X39.82813 Y45.18042
G01 X39.88162 Y45.35670
G01 X39.90235 Y45.55672
G01 X39.91223 Y45.57636
G01 X39.93836 Y45.59599
G01 X39.95998 Y45.60003
G01 X41.62167 Y45.59886
G01 X41.65241 Y45.58245
G01 X41.66541 Y45.56297
G01 X41.66998 Y45.54001
G01 X41.66882 Y25.08834
G01 X41.65241 Y25.05760
G01 X41.63293 Y25.04460
G01 X41.60999 Y25.04003
G01 X36.29829 Y25.04119
G01 X36.26756 Y25.05760
G01 X36.25455 Y25.07708
G01 X36.24998 Y25.10002
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X36.36999 Y25.16004 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X36.36999 Y25.16004
G01 X36.36999 Y45.48001
G01 X37.90560 Y45.48001
G01 X37.92178 Y45.32751
G01 X37.98317 Y45.12906
G01 X38.08211 Y44.94639
G01 X38.21480 Y44.78652
G01 X38.37611 Y44.65563
G01 X38.55988 Y44.55873
G01 X38.75902 Y44.49955
G01 X38.96585 Y44.48032
G01 X39.17248 Y44.50184
G01 X39.37090 Y44.56323
G01 X39.54383 Y44.65563
G01 X39.70512 Y44.78654
G01 X39.83781 Y44.94639
G01 X39.93674 Y45.12906
G01 X39.99818 Y45.32749
G01 X40.01436 Y45.48001
G01 X41.54997 Y45.48001
G01 X41.54997 Y25.16004
G01 X36.36999 Y25.16004
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X38.01307 Y30.38739 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X38.01307 Y30.38739
G01 X38.01878 Y30.41609
G01 X38.02569 Y30.42907
G01 X38.04639 Y30.44977
G01 X38.07342 Y30.46097
G01 X38.10271 Y30.46097
G01 X38.12973 Y30.44977
G01 X38.15043 Y30.42907
G01 X38.16163 Y30.40204
G01 X38.16306 Y29.59559
G01 X38.19732 Y29.52709
G01 X38.22775 Y29.49666
G01 X38.29625 Y29.46239
G01 X38.45130 Y29.46239
G01 X38.51982 Y29.49666
G01 X38.55023 Y29.52706
G01 X38.58447 Y29.59557
G01 X38.58589 Y30.40204
G01 X38.59709 Y30.42907
G01 X38.61779 Y30.44977
G01 X38.64482 Y30.46097
G01 X38.65947 Y30.46239
G01 X38.68815 Y30.45668
G01 X38.70110 Y30.44977
G01 X38.72183 Y30.42907
G01 X38.73303 Y30.40204
G01 X38.73443 Y30.38739
G01 X38.73443 Y29.57786
G01 X38.72653 Y29.54436
G01 X38.67898 Y29.44913
G01 X38.66491 Y29.42963
G01 X38.60812 Y29.37418
G01 X38.50255 Y29.32031
G01 X38.46902 Y29.31241
G01 X38.26130 Y29.31441
G01 X38.14977 Y29.36796
G01 X38.13029 Y29.38200
G01 X38.07484 Y29.43880
G01 X38.01508 Y29.56064
G01 X38.01307 Y30.38739
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X39.01304 Y30.14929 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X39.01304 Y30.14929
G01 X39.01502 Y30.21416
G01 X39.06857 Y30.32571
G01 X39.08264 Y30.34522
G01 X39.13946 Y30.40064
G01 X39.26130 Y30.46039
G01 X39.48622 Y30.46039
G01 X39.59775 Y30.40689
G01 X39.61728 Y30.39282
G01 X39.67271 Y30.33603
G01 X39.73250 Y30.21416
G01 X39.73450 Y30.14929
G01 X39.72658 Y30.11573
G01 X39.67271 Y30.01022
G01 X39.62272 Y29.95884
G01 X39.67271 Y29.90745
G01 X39.73250 Y29.78558
G01 X39.73250 Y29.56064
G01 X39.67271 Y29.43880
G01 X39.60811 Y29.37418
G01 X39.48622 Y29.31441
G01 X39.26130 Y29.31441
G01 X39.13946 Y29.37418
G01 X39.08264 Y29.42960
G01 X39.06859 Y29.44911
G01 X39.01502 Y29.56064
G01 X39.01502 Y29.78558
G01 X39.07482 Y29.90745
G01 X39.12485 Y29.95884
G01 X39.07482 Y30.01022
G01 X39.02097 Y30.11576
G01 X39.01304 Y30.14929
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X39.16303 Y30.16702 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X39.16303 Y30.16702
G01 X39.16303 Y30.17921
G01 X39.19729 Y30.24774
G01 X39.22772 Y30.27814
G01 X39.29623 Y30.31240
G01 X39.45132 Y30.31240
G01 X39.51980 Y30.27817
G01 X39.55023 Y30.24776
G01 X39.58452 Y30.17921
G01 X39.58452 Y30.16702
G01 X39.55023 Y30.09851
G01 X39.51980 Y30.06808
G01 X39.45129 Y30.03382
G01 X39.29625 Y30.03382
G01 X39.22772 Y30.06808
G01 X39.19729 Y30.09851
G01 X39.16303 Y30.16702
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X39.16303 Y29.59559 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X39.16303 Y29.59559
G01 X39.19729 Y29.52709
G01 X39.22772 Y29.49666
G01 X39.29625 Y29.46239
G01 X39.45129 Y29.46239
G01 X39.51980 Y29.49666
G01 X39.55023 Y29.52709
G01 X39.58452 Y29.59559
G01 X39.58452 Y29.75063
G01 X39.55023 Y29.81919
G01 X39.51980 Y29.84959
G01 X39.45132 Y29.88383
G01 X39.29623 Y29.88383
G01 X39.22772 Y29.84957
G01 X39.19729 Y29.81916
G01 X39.16303 Y29.75063
G01 X39.16303 Y29.59559
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X51.12308 Y30.38739 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X51.12308 Y30.38739
G01 X51.12879 Y30.41609
G01 X51.13570 Y30.42907
G01 X51.15640 Y30.44977
G01 X51.18343 Y30.46097
G01 X51.21271 Y30.46097
G01 X51.23974 Y30.44977
G01 X51.26044 Y30.42907
G01 X51.27164 Y30.40204
G01 X51.27306 Y29.59559
G01 X51.30733 Y29.52709
G01 X51.33776 Y29.49666
G01 X51.40626 Y29.46239
G01 X51.56130 Y29.46239
G01 X51.62983 Y29.49666
G01 X51.66024 Y29.52706
G01 X51.69450 Y29.59559
G01 X51.69592 Y30.40204
G01 X51.70712 Y30.42907
G01 X51.72782 Y30.44977
G01 X51.75485 Y30.46097
G01 X51.76951 Y30.46239
G01 X51.79818 Y30.45668
G01 X51.81116 Y30.44977
G01 X51.83186 Y30.42907
G01 X51.84306 Y30.40204
G01 X51.84449 Y30.38739
G01 X51.84449 Y29.57786
G01 X51.83656 Y29.54433
G01 X51.78271 Y29.43880
G01 X51.72732 Y29.38200
G01 X51.70781 Y29.36793
G01 X51.61256 Y29.32031
G01 X51.57903 Y29.31241
G01 X51.37131 Y29.31441
G01 X51.25978 Y29.36796
G01 X51.24030 Y29.38200
G01 X51.18485 Y29.43880
G01 X51.12508 Y29.56064
G01 X51.12308 Y30.38739
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X52.12343 Y29.91868 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X52.12343 Y29.91868
G01 X52.17106 Y30.39485
G01 X52.18061 Y30.42467
G01 X52.20148 Y30.44799
G01 X52.23006 Y30.46074
G01 X52.24571 Y30.46239
G01 X52.72188 Y30.46239
G01 X52.75056 Y30.45668
G01 X52.76354 Y30.44977
G01 X52.78424 Y30.42907
G01 X52.79544 Y30.40204
G01 X52.79544 Y30.37276
G01 X52.78424 Y30.34573
G01 X52.76354 Y30.32503
G01 X52.75056 Y30.31812
G01 X52.72188 Y30.31240
G01 X52.31357 Y30.31240
G01 X52.28873 Y30.06422
G01 X52.32368 Y30.07944
G01 X52.34093 Y30.08144
G01 X52.59625 Y30.07944
G01 X52.71812 Y30.01967
G01 X52.78271 Y29.95508
G01 X52.83659 Y29.84952
G01 X52.84449 Y29.81596
G01 X52.84248 Y29.56064
G01 X52.78894 Y29.44911
G01 X52.77491 Y29.42963
G01 X52.71812 Y29.37418
G01 X52.59625 Y29.31441
G01 X52.32368 Y29.31441
G01 X52.20184 Y29.37418
G01 X52.14505 Y29.42963
G01 X52.13570 Y29.44098
G01 X52.12450 Y29.46801
G01 X52.12450 Y29.49729
G01 X52.13570 Y29.52432
G01 X52.15640 Y29.54502
G01 X52.18342 Y29.55622
G01 X52.21271 Y29.55622
G01 X52.23974 Y29.54502
G01 X52.29013 Y29.49666
G01 X52.35863 Y29.46239
G01 X52.56130 Y29.46239
G01 X52.62983 Y29.49666
G01 X52.66023 Y29.52706
G01 X52.69450 Y29.59559
G01 X52.69450 Y29.79826
G01 X52.66023 Y29.86679
G01 X52.62983 Y29.89719
G01 X52.56130 Y29.93146
G01 X52.35863 Y29.93146
G01 X52.29010 Y29.89719
G01 X52.24019 Y29.84916
G01 X52.21431 Y29.83801
G01 X52.18617 Y29.83717
G01 X52.15970 Y29.84680
G01 X52.13862 Y29.86549
G01 X52.12594 Y29.89064
G01 X52.12343 Y29.91868
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X49.36999 Y25.16004 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X49.36999 Y25.16004
G01 X54.54997 Y25.16004
G01 X54.54997 Y45.48001
G01 X53.01436 Y45.48001
G01 X52.99818 Y45.32751
G01 X52.93676 Y45.12906
G01 X52.83783 Y44.94639
G01 X52.70514 Y44.78652
G01 X52.55360 Y44.66216
G01 X52.37095 Y44.56323
G01 X52.17248 Y44.50184
G01 X51.96585 Y44.48032
G01 X51.75902 Y44.49955
G01 X51.55988 Y44.55873
G01 X51.37611 Y44.65563
G01 X51.21480 Y44.78652
G01 X51.08211 Y44.94639
G01 X50.98317 Y45.12906
G01 X50.92178 Y45.32751
G01 X50.90560 Y45.48001
G01 X49.36999 Y45.48001
G01 X49.36999 Y25.16004
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X49.24998 Y25.10002 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X49.24998 Y25.10002
G01 X49.25455 Y25.07708
G01 X49.26756 Y25.05760
G01 X49.29829 Y25.04119
G01 X54.60999 Y25.04003
G01 X54.63292 Y25.04460
G01 X54.65241 Y25.05760
G01 X54.66881 Y25.08834
G01 X54.66998 Y45.54001
G01 X54.66541 Y45.56297
G01 X54.65241 Y45.58245
G01 X54.62167 Y45.59886
G01 X52.95998 Y45.60003
G01 X52.93836 Y45.59599
G01 X52.91223 Y45.57636
G01 X52.90235 Y45.55672
G01 X52.88162 Y45.35670
G01 X52.82815 Y45.18042
G01 X52.74131 Y45.01794
G01 X52.62444 Y44.87555
G01 X52.48205 Y44.75868
G01 X52.31959 Y44.67184
G01 X52.14329 Y44.61840
G01 X51.95998 Y44.60031
G01 X51.77667 Y44.61840
G01 X51.60037 Y44.67186
G01 X51.43788 Y44.75868
G01 X51.29549 Y44.87555
G01 X51.17863 Y45.01794
G01 X51.09178 Y45.18042
G01 X51.03834 Y45.35670
G01 X51.01713 Y45.55825
G01 X51.00471 Y45.58001
G01 X50.98447 Y45.59480
G01 X50.95998 Y45.60003
G01 X49.31000 Y45.60003
G01 X49.28704 Y45.59546
G01 X49.26756 Y45.58245
G01 X49.25115 Y45.55172
G01 X49.24998 Y25.10002
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X67.94997 Y3.54865 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X67.94997 Y3.54865
G01 X67.95454 Y3.52572
G01 X67.97664 Y3.49877
G01 X68.00999 Y3.48866
G01 X110.14998 Y3.48866
G01 X110.17292 Y3.49323
G01 X110.19987 Y3.51533
G01 X110.20998 Y3.54865
G01 X110.20998 Y22.88865
G01 X110.20541 Y22.91161
G01 X110.18331 Y22.93856
G01 X110.14998 Y22.94867
G01 X68.00999 Y22.94867
G01 X67.98703 Y22.94409
G01 X67.96008 Y22.92200
G01 X67.94997 Y22.88865
G01 X67.94997 Y3.54865
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X68.06998 Y3.60867 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X68.06998 Y3.60867
G01 X110.08996 Y3.60867
G01 X110.08996 Y22.82865
G01 X68.06998 Y22.82865
G01 X68.06998 Y3.60867
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X88.36212 Y23.55603 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X88.36212 Y23.55603
G01 X88.36783 Y23.52735
G01 X88.37474 Y23.51437
G01 X88.39544 Y23.49367
G01 X88.42247 Y23.48247
G01 X88.43712 Y23.48105
G01 X88.91332 Y23.48105
G01 X88.94200 Y23.48676
G01 X88.95498 Y23.49367
G01 X88.97568 Y23.51437
G01 X88.98688 Y23.54140
G01 X88.98830 Y23.55603
G01 X88.98688 Y23.57069
G01 X88.97568 Y23.59771
G01 X88.95498 Y23.61841
G01 X88.94200 Y23.62532
G01 X88.91332 Y23.63104
G01 X88.51210 Y23.63104
G01 X88.51068 Y24.57068
G01 X88.49948 Y24.59771
G01 X88.47878 Y24.61841
G01 X88.46580 Y24.62532
G01 X88.43712 Y24.63103
G01 X88.42247 Y24.62961
G01 X88.39544 Y24.61841
G01 X88.37474 Y24.59771
G01 X88.36354 Y24.57068
G01 X88.36212 Y24.55603
G01 X88.36212 Y23.55603
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X89.07784 Y23.66589 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X89.07784 Y23.66589
G01 X89.08211 Y23.67996
G01 X89.09836 Y23.70429
G01 X89.10972 Y23.71361
G01 X89.13677 Y23.72481
G01 X89.16603 Y23.72484
G01 X89.19305 Y23.71364
G01 X89.24345 Y23.66530
G01 X89.31198 Y23.63104
G01 X89.56224 Y23.63104
G01 X89.63077 Y23.66530
G01 X89.66118 Y23.69570
G01 X89.69539 Y23.76423
G01 X89.69539 Y23.96690
G01 X89.66118 Y24.03543
G01 X89.63077 Y24.06583
G01 X89.56224 Y24.10010
G01 X89.43712 Y24.10010
G01 X89.40918 Y24.10548
G01 X89.38526 Y24.12090
G01 X89.37593 Y24.13172
G01 X89.36882 Y24.14409
G01 X89.36219 Y24.17175
G01 X89.36633 Y24.19989
G01 X89.38066 Y24.22448
G01 X89.60514 Y24.48105
G01 X89.13677 Y24.48247
G01 X89.10974 Y24.49367
G01 X89.09839 Y24.50302
G01 X89.08904 Y24.51437
G01 X89.07784 Y24.54140
G01 X89.07784 Y24.57068
G01 X89.08904 Y24.59771
G01 X89.09839 Y24.60906
G01 X89.12272 Y24.62532
G01 X89.15142 Y24.63103
G01 X89.77045 Y24.63103
G01 X89.78464 Y24.62969
G01 X89.81106 Y24.61910
G01 X89.82224 Y24.61023
G01 X89.83872 Y24.58704
G01 X89.84533 Y24.55938
G01 X89.84464 Y24.54511
G01 X89.83522 Y24.51826
G01 X89.59981 Y24.24714
G01 X89.71906 Y24.18831
G01 X89.77586 Y24.13286
G01 X89.78988 Y24.11338
G01 X89.84340 Y24.00185
G01 X89.84340 Y23.72928
G01 X89.78365 Y23.60741
G01 X89.72823 Y23.55065
G01 X89.70875 Y23.53660
G01 X89.59722 Y23.48306
G01 X89.27703 Y23.48306
G01 X89.15518 Y23.54282
G01 X89.08907 Y23.60957
G01 X89.07786 Y23.63662
G01 X89.07784 Y23.66589
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X114.47596 Y3.32064 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X114.47596 Y3.32064
G01 X114.48053 Y3.29770
G01 X114.50263 Y3.27075
G01 X114.53598 Y3.26064
G01 X125.20398 Y3.26064
G01 X125.22692 Y3.26521
G01 X125.25387 Y3.28731
G01 X125.26397 Y3.32064
G01 X125.26397 Y6.87664
G01 X125.25940 Y6.89960
G01 X125.23730 Y6.92655
G01 X125.20398 Y6.93666
G01 X114.53598 Y6.93666
G01 X114.51302 Y6.93209
G01 X114.48607 Y6.90999
G01 X114.47596 Y6.87664
G01 X114.47596 Y3.32064
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X114.59597 Y3.38066 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X114.59597 Y3.38066
G01 X125.14396 Y3.38066
G01 X125.14396 Y6.81664
G01 X114.59597 Y6.81664
G01 X114.59597 Y3.38066
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X119.09012 Y10.71740 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X119.09012 Y10.71740
G01 X119.10133 Y10.69037
G01 X119.12203 Y10.66967
G01 X119.13501 Y10.66276
G01 X119.16371 Y10.65705
G01 X119.27092 Y10.65801
G01 X119.42551 Y10.70851
G01 X119.45482 Y10.72664
G01 X119.55004 Y10.82187
G01 X119.56818 Y10.85118
G01 X119.61580 Y10.99403
G01 X119.61964 Y11.01773
G01 X119.61964 Y11.73203
G01 X119.61822 Y11.74668
G01 X119.60701 Y11.77371
G01 X119.58631 Y11.79441
G01 X119.57333 Y11.80132
G01 X119.54466 Y11.80703
G01 X119.53000 Y11.80561
G01 X119.50298 Y11.79441
G01 X119.48227 Y11.77371
G01 X119.47107 Y11.74668
G01 X119.46965 Y11.02992
G01 X119.43147 Y10.91542
G01 X119.36127 Y10.84521
G01 X119.24674 Y10.80703
G01 X119.14905 Y10.80561
G01 X119.12203 Y10.79441
G01 X119.10133 Y10.77371
G01 X119.09012 Y10.74668
G01 X119.09012 Y10.71740
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X119.94585 Y10.73203 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X119.94585 Y10.73203
G01 X119.95156 Y10.70335
G01 X119.96782 Y10.67902
G01 X119.99215 Y10.66276
G01 X120.02086 Y10.65705
G01 X120.03549 Y10.65847
G01 X120.06251 Y10.66967
G01 X120.08321 Y10.69037
G01 X120.09441 Y10.71740
G01 X120.09584 Y11.13325
G01 X120.40181 Y11.13325
G01 X120.43533 Y11.14115
G01 X120.54087 Y11.19499
G01 X120.59766 Y11.25044
G01 X120.61174 Y11.26992
G01 X120.66525 Y11.38148
G01 X120.66525 Y11.55880
G01 X120.61171 Y11.67033
G01 X120.59766 Y11.68981
G01 X120.54087 Y11.74526
G01 X120.41903 Y11.80502
G01 X120.02086 Y11.80703
G01 X120.00620 Y11.80561
G01 X119.97917 Y11.79441
G01 X119.95847 Y11.77371
G01 X119.95156 Y11.76073
G01 X119.94585 Y11.73203
G01 X119.94585 Y10.73203
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X120.09584 Y11.28323 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X120.09584 Y11.28323
G01 X120.09584 Y11.65704
G01 X120.38408 Y11.65704
G01 X120.45258 Y11.62278
G01 X120.48301 Y11.59235
G01 X120.51727 Y11.52385
G01 X120.51727 Y11.41643
G01 X120.48301 Y11.34790
G01 X120.45261 Y11.31747
G01 X120.38410 Y11.28323
G01 X120.09584 Y11.28323
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X120.89822 Y10.92250 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X120.89822 Y10.92250
G01 X120.89822 Y11.30345
G01 X120.95225 Y11.52428
G01 X121.05367 Y11.67838
G01 X121.11067 Y11.73744
G01 X121.13015 Y11.75148
G01 X121.22537 Y11.79911
G01 X121.25893 Y11.80703
G01 X121.44943 Y11.80703
G01 X121.47810 Y11.80132
G01 X121.50244 Y11.78506
G01 X121.51869 Y11.76073
G01 X121.52441 Y11.73203
G01 X121.51869 Y11.70335
G01 X121.51179 Y11.69037
G01 X121.49108 Y11.66967
G01 X121.46406 Y11.65847
G01 X121.27663 Y11.65704
G01 X121.20813 Y11.62278
G01 X121.17435 Y11.58900
G01 X121.09045 Y11.46314
G01 X121.07193 Y11.38905
G01 X121.13015 Y11.41818
G01 X121.16370 Y11.42608
G01 X121.35418 Y11.42608
G01 X121.38771 Y11.41818
G01 X121.49327 Y11.36431
G01 X121.55006 Y11.30886
G01 X121.56408 Y11.28938
G01 X121.61171 Y11.19415
G01 X121.61963 Y11.16060
G01 X121.61963 Y10.92250
G01 X121.61173 Y10.88897
G01 X121.55786 Y10.78341
G01 X121.50244 Y10.72664
G01 X121.48296 Y10.71257
G01 X121.37140 Y10.65905
G01 X121.14646 Y10.65905
G01 X121.03490 Y10.71257
G01 X121.01542 Y10.72664
G01 X120.96000 Y10.78341
G01 X120.90612 Y10.88897
G01 X120.89822 Y10.92250
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X121.04821 Y10.94023 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X121.04821 Y10.94023
G01 X121.04821 Y11.14290
G01 X121.08247 Y11.21143
G01 X121.11288 Y11.24183
G01 X121.18141 Y11.27610
G01 X121.33645 Y11.27610
G01 X121.40498 Y11.24183
G01 X121.43538 Y11.21143
G01 X121.46965 Y11.14290
G01 X121.46965 Y10.94023
G01 X121.43538 Y10.87170
G01 X121.40498 Y10.84130
G01 X121.33645 Y10.80703
G01 X121.18141 Y10.80703
G01 X121.11288 Y10.84130
G01 X121.08247 Y10.87170
G01 X121.04821 Y10.94023
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X117.53999 Y30.24865 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X117.53999 Y30.24865
G01 X118.53996 Y30.24865
G01 X118.53996 Y39.36865
G01 X117.53999 Y39.36865
G01 X117.53999 Y30.24865
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X112.11963 Y40.62729 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X112.11963 Y40.62729
G01 X112.16725 Y41.10349
G01 X112.17680 Y41.13331
G01 X112.19768 Y41.15663
G01 X112.22626 Y41.16938
G01 X112.24190 Y41.17103
G01 X112.71808 Y41.17103
G01 X112.74675 Y41.16532
G01 X112.75973 Y41.15841
G01 X112.78043 Y41.13771
G01 X112.79163 Y41.11068
G01 X112.79163 Y41.08140
G01 X112.78043 Y41.05437
G01 X112.75973 Y41.03367
G01 X112.74675 Y41.02676
G01 X112.71808 Y41.02104
G01 X112.30977 Y41.02104
G01 X112.28493 Y40.77286
G01 X112.31988 Y40.78808
G01 X112.33713 Y40.79008
G01 X112.59245 Y40.78808
G01 X112.71429 Y40.72831
G01 X112.77891 Y40.66369
G01 X112.83276 Y40.55816
G01 X112.84068 Y40.52460
G01 X112.83868 Y40.26928
G01 X112.78516 Y40.15772
G01 X112.77109 Y40.13822
G01 X112.71429 Y40.08282
G01 X112.59245 Y40.02305
G01 X112.31988 Y40.02305
G01 X112.19804 Y40.08282
G01 X112.14124 Y40.13822
G01 X112.13192 Y40.14957
G01 X112.12072 Y40.17662
G01 X112.12069 Y40.20588
G01 X112.13190 Y40.23291
G01 X112.15257 Y40.25361
G01 X112.17962 Y40.26481
G01 X112.20888 Y40.26484
G01 X112.23591 Y40.25363
G01 X112.28630 Y40.20530
G01 X112.35483 Y40.17103
G01 X112.55750 Y40.17103
G01 X112.62603 Y40.20530
G01 X112.65643 Y40.23570
G01 X112.69070 Y40.30423
G01 X112.69070 Y40.50690
G01 X112.65643 Y40.57540
G01 X112.62600 Y40.60583
G01 X112.55750 Y40.64010
G01 X112.35483 Y40.64010
G01 X112.28633 Y40.60583
G01 X112.23639 Y40.55780
G01 X112.21053 Y40.54662
G01 X112.18236 Y40.54579
G01 X112.16867 Y40.54934
G01 X112.14447 Y40.56374
G01 X112.13484 Y40.57411
G01 X112.12214 Y40.59925
G01 X112.11963 Y40.62729
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X111.31689 Y40.64723 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X111.31689 Y40.64723
G01 X111.60515 Y40.64723
G01 X111.67365 Y40.68147
G01 X111.70406 Y40.71190
G01 X111.73832 Y40.78043
G01 X111.73832 Y40.88785
G01 X111.70406 Y40.95635
G01 X111.67363 Y40.98678
G01 X111.60512 Y41.02104
G01 X111.31689 Y41.02104
G01 X111.31689 Y40.64723
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X111.16690 Y40.09603 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X111.16690 Y40.09603
G01 X111.16832 Y40.08140
G01 X111.17952 Y40.05437
G01 X111.20022 Y40.03367
G01 X111.22725 Y40.02247
G01 X111.25654 Y40.02247
G01 X111.28356 Y40.03367
G01 X111.30426 Y40.05437
G01 X111.31546 Y40.08140
G01 X111.31689 Y40.09603
G01 X111.31689 Y40.49725
G01 X111.44091 Y40.49725
G01 X111.76144 Y40.04187
G01 X111.78612 Y40.02615
G01 X111.81495 Y40.02105
G01 X111.84350 Y40.02740
G01 X111.86748 Y40.04416
G01 X111.88320 Y40.06885
G01 X111.88831 Y40.09768
G01 X111.88196 Y40.12623
G01 X111.62392 Y40.49737
G01 X111.65638 Y40.50515
G01 X111.75161 Y40.55274
G01 X111.77109 Y40.56682
G01 X111.82654 Y40.62361
G01 X111.88041 Y40.72917
G01 X111.88831 Y40.76270
G01 X111.88630 Y40.92280
G01 X111.83276 Y41.03433
G01 X111.81871 Y41.05381
G01 X111.76192 Y41.10926
G01 X111.64007 Y41.16903
G01 X111.24190 Y41.17103
G01 X111.22725 Y41.16961
G01 X111.20022 Y41.15841
G01 X111.17952 Y41.13771
G01 X111.16832 Y41.11068
G01 X111.16690 Y41.09603
G01 X111.16690 Y40.09603
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X106.53998 Y30.24865 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X106.53998 Y30.24865
G01 X117.41997 Y30.24865
G01 X117.41997 Y39.36865
G01 X106.53998 Y39.36865
G01 X106.53998 Y30.24865
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X105.41997 Y30.24865 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X105.41997 Y30.24865
G01 X105.41997 Y39.36865
G01 X106.41997 Y39.36865
G01 X106.41997 Y30.24865
G01 X105.41997 Y30.24865
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X105.29996 Y30.18863 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X105.29996 Y30.18863
G01 X105.29996 Y39.42864
G01 X105.30453 Y39.45160
G01 X105.32663 Y39.47855
G01 X105.35998 Y39.48866
G01 X118.59998 Y39.48866
G01 X118.62292 Y39.48409
G01 X118.64987 Y39.46199
G01 X118.65997 Y39.42864
G01 X118.65997 Y30.18863
G01 X118.65540 Y30.16569
G01 X118.63330 Y30.13874
G01 X118.59998 Y30.12864
G01 X105.35998 Y30.12864
G01 X105.33701 Y30.13321
G01 X105.31006 Y30.15531
G01 X105.29996 Y30.18863
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X98.61099 Y37.89867 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X98.61099 Y37.89867
G01 X101.75996 Y37.89867
G01 X101.75996 Y39.28864
G01 X98.61099 Y39.28864
G01 X98.61099 Y37.89867
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X94.90998 Y37.89867 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X94.90998 Y37.89867
G01 X94.90998 Y39.28864
G01 X98.49098 Y39.28864
G01 X98.49098 Y37.89867
G01 X94.90998 Y37.89867
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X91.63999 Y34.76767 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X91.63999 Y34.76767
G01 X91.63999 Y37.77866
G01 X101.75996 Y37.77866
G01 X101.75996 Y34.76767
G01 X91.63999 Y34.76767
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X91.51997 Y34.70765 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X91.51997 Y34.70765
G01 X91.51997 Y39.34863
G01 X91.52449 Y39.37159
G01 X91.54662 Y39.39854
G01 X91.57999 Y39.40865
G01 X101.81998 Y39.40865
G01 X101.84291 Y39.40408
G01 X101.86986 Y39.38198
G01 X101.87997 Y39.34863
G01 X101.87997 Y34.70765
G01 X101.87540 Y34.68471
G01 X101.85330 Y34.65776
G01 X101.81998 Y34.64765
G01 X91.57999 Y34.64765
G01 X91.55703 Y34.65222
G01 X91.53008 Y34.67432
G01 X91.51997 Y34.70765
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X91.63999 Y37.89867 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X91.63999 Y37.89867
G01 X91.63999 Y39.28864
G01 X94.78997 Y39.28864
G01 X94.78997 Y37.89867
G01 X91.63999 Y37.89867
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X85.91099 Y37.89867 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X85.91099 Y37.89867
G01 X85.91099 Y39.28864
G01 X89.05996 Y39.28864
G01 X89.05996 Y37.89867
G01 X85.91099 Y37.89867
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X84.31305 Y40.09422 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X84.31305 Y40.09422
G01 X84.34732 Y40.02572
G01 X84.37775 Y39.99529
G01 X84.44625 Y39.96103
G01 X84.60132 Y39.96103
G01 X84.66982 Y39.99529
G01 X84.70025 Y40.02572
G01 X84.73452 Y40.09422
G01 X84.73452 Y40.29689
G01 X84.70025 Y40.36542
G01 X84.66985 Y40.39582
G01 X84.60132 Y40.43009
G01 X84.44625 Y40.43009
G01 X84.37772 Y40.39582
G01 X84.34732 Y40.36542
G01 X84.31305 Y40.29689
G01 X84.31305 Y40.09422
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X84.16307 Y40.07650 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X84.16307 Y40.07650
G01 X84.17099 Y40.04297
G01 X84.22484 Y39.93743
G01 X84.28029 Y39.88064
G01 X84.29977 Y39.86659
G01 X84.41130 Y39.81305
G01 X84.63627 Y39.81305
G01 X84.74780 Y39.86659
G01 X84.76728 Y39.88064
G01 X84.82273 Y39.93743
G01 X84.87658 Y40.04297
G01 X84.88450 Y40.07650
G01 X84.88450 Y40.31459
G01 X84.87660 Y40.34815
G01 X84.82898 Y40.44340
G01 X84.81491 Y40.46291
G01 X84.75811 Y40.51830
G01 X84.65257 Y40.57215
G01 X84.61905 Y40.58008
G01 X84.42855 Y40.58008
G01 X84.39499 Y40.57215
G01 X84.33678 Y40.54304
G01 X84.35529 Y40.61713
G01 X84.43922 Y40.74302
G01 X84.47297 Y40.77677
G01 X84.54150 Y40.81104
G01 X84.72890 Y40.81246
G01 X84.75593 Y40.82366
G01 X84.77663 Y40.84436
G01 X84.78354 Y40.85734
G01 X84.78925 Y40.88602
G01 X84.78354 Y40.91472
G01 X84.76728 Y40.93905
G01 X84.74295 Y40.95531
G01 X84.71427 Y40.96102
G01 X84.52380 Y40.96102
G01 X84.49024 Y40.95313
G01 X84.39499 Y40.90550
G01 X84.37551 Y40.89143
G01 X84.31854 Y40.83240
G01 X84.21709 Y40.67827
G01 X84.16307 Y40.45744
G01 X84.16307 Y40.07650
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X83.11547 Y40.55269 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X83.11547 Y40.55269
G01 X83.16530 Y40.76136
G01 X83.17638 Y40.78587
G01 X83.28946 Y40.89925
G01 X83.39500 Y40.95310
G01 X83.42855 Y40.96102
G01 X83.63624 Y40.95902
G01 X83.75811 Y40.89925
G01 X83.87117 Y40.78587
G01 X83.88224 Y40.76138
G01 X83.92987 Y40.57091
G01 X83.92987 Y40.20118
G01 X83.87780 Y39.99796
G01 X83.86251 Y39.97586
G01 X83.82032 Y39.93365
G01 X83.85392 Y39.90004
G01 X83.93825 Y39.85790
G01 X83.95070 Y39.85008
G01 X83.96987 Y39.82796
G01 X83.97914 Y39.80019
G01 X83.97709 Y39.77101
G01 X83.96401 Y39.74485
G01 X83.95390 Y39.73415
G01 X83.92847 Y39.71965
G01 X83.91412 Y39.71640
G01 X83.88494 Y39.71846
G01 X83.77597 Y39.77131
G01 X83.75644 Y39.78539
G01 X83.69944 Y39.84241
G01 X83.65255 Y39.81894
G01 X83.61902 Y39.81104
G01 X83.42855 Y39.81104
G01 X83.39500 Y39.81896
G01 X83.29977 Y39.86659
G01 X83.28029 Y39.88061
G01 X83.18504 Y39.97583
G01 X83.16975 Y39.99796
G01 X83.11770 Y40.20121
G01 X83.11547 Y40.55269
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X83.26546 Y40.22862 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X83.26546 Y40.22862
G01 X83.30579 Y40.06722
G01 X83.37775 Y39.99529
G01 X83.44625 Y39.96103
G01 X83.58082 Y39.96103
G01 X83.52697 Y40.01487
G01 X83.45844 Y40.04914
G01 X83.36629 Y40.05056
G01 X83.33927 Y40.06176
G01 X83.31857 Y40.08246
G01 X83.30737 Y40.10949
G01 X83.30594 Y40.12412
G01 X83.31166 Y40.15282
G01 X83.31857 Y40.16580
G01 X83.33927 Y40.18650
G01 X83.36629 Y40.19770
G01 X83.49340 Y40.19712
G01 X83.61526 Y40.13735
G01 X83.71427 Y40.03972
G01 X83.74176 Y40.06722
G01 X83.78212 Y40.22862
G01 X83.78212 Y40.54347
G01 X83.74176 Y40.70484
G01 X83.66982 Y40.77677
G01 X83.60129 Y40.81104
G01 X83.44625 Y40.81104
G01 X83.37775 Y40.77677
G01 X83.30579 Y40.70484
G01 X83.26546 Y40.54347
G01 X83.26546 Y40.22862
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X82.20998 Y37.89867 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X82.20998 Y37.89867
G01 X82.20998 Y39.28864
G01 X85.79098 Y39.28864
G01 X85.79098 Y37.89867
G01 X82.20998 Y37.89867
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X78.93999 Y34.76767 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X78.93999 Y34.76767
G01 X78.93999 Y37.77866
G01 X89.05996 Y37.77866
G01 X89.05996 Y34.76767
G01 X78.93999 Y34.76767
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X78.81997 Y34.70765 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X78.81997 Y34.70765
G01 X78.81997 Y39.34863
G01 X78.82455 Y39.37159
G01 X78.84664 Y39.39854
G01 X78.87999 Y39.40865
G01 X89.11998 Y39.40865
G01 X89.14291 Y39.40408
G01 X89.16986 Y39.38198
G01 X89.17997 Y39.34863
G01 X89.17997 Y34.70765
G01 X89.17540 Y34.68471
G01 X89.15330 Y34.65776
G01 X89.11998 Y34.64765
G01 X78.87999 Y34.64765
G01 X78.85703 Y34.65222
G01 X78.83008 Y34.67432
G01 X78.81997 Y34.70765
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X78.93999 Y37.89867 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X78.93999 Y37.89867
G01 X78.93999 Y39.28864
G01 X82.08997 Y39.28864
G01 X82.08997 Y37.89867
G01 X78.93999 Y37.89867
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X87.44998 Y47.52002 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X87.44998 Y47.52002
G01 X87.45115 Y67.97171
G01 X87.46756 Y68.00245
G01 X87.48704 Y68.01545
G01 X87.51000 Y68.02003
G01 X92.82165 Y68.01886
G01 X92.85241 Y68.00245
G01 X92.86539 Y67.98297
G01 X92.86998 Y67.96001
G01 X92.86879 Y47.50833
G01 X92.85241 Y47.47760
G01 X92.83292 Y47.46459
G01 X92.80999 Y47.46002
G01 X91.15998 Y47.46002
G01 X91.13836 Y47.46406
G01 X91.11223 Y47.48369
G01 X91.10235 Y47.50333
G01 X91.08162 Y47.70335
G01 X91.02815 Y47.87963
G01 X90.94128 Y48.04211
G01 X90.82444 Y48.18451
G01 X90.68200 Y48.30137
G01 X90.51959 Y48.38821
G01 X90.34329 Y48.44165
G01 X90.15998 Y48.45974
G01 X89.97667 Y48.44165
G01 X89.80037 Y48.38819
G01 X89.63786 Y48.30137
G01 X89.49549 Y48.18451
G01 X89.37863 Y48.04211
G01 X89.29178 Y47.87963
G01 X89.23834 Y47.70335
G01 X89.21713 Y47.50180
G01 X89.20471 Y47.48004
G01 X89.18447 Y47.46525
G01 X89.15998 Y47.46002
G01 X87.49829 Y47.46119
G01 X87.46756 Y47.47760
G01 X87.45455 Y47.49708
G01 X87.44998 Y47.52002
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X87.56999 Y47.58004 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X87.56999 Y47.58004
G01 X87.56999 Y67.90001
G01 X92.74997 Y67.90001
G01 X92.74997 Y47.58004
G01 X91.21436 Y47.58004
G01 X91.19815 Y47.73254
G01 X91.13676 Y47.93099
G01 X91.03780 Y48.11366
G01 X90.90514 Y48.27353
G01 X90.75360 Y48.39789
G01 X90.57095 Y48.49682
G01 X90.37245 Y48.55822
G01 X90.16585 Y48.57973
G01 X89.95902 Y48.56050
G01 X89.75988 Y48.50132
G01 X89.57609 Y48.40442
G01 X89.41480 Y48.27351
G01 X89.28211 Y48.11366
G01 X89.18317 Y47.93099
G01 X89.12178 Y47.73254
G01 X89.10560 Y47.58004
G01 X87.56999 Y47.58004
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X95.81547 Y40.55269 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X95.81547 Y40.55269
G01 X95.86530 Y40.76136
G01 X95.87638 Y40.78587
G01 X95.98946 Y40.89925
G01 X96.09500 Y40.95310
G01 X96.12855 Y40.96102
G01 X96.33624 Y40.95902
G01 X96.45811 Y40.89925
G01 X96.57117 Y40.78587
G01 X96.58224 Y40.76138
G01 X96.62987 Y40.57091
G01 X96.62987 Y40.20118
G01 X96.57780 Y39.99796
G01 X96.56251 Y39.97586
G01 X96.52032 Y39.93365
G01 X96.55392 Y39.90004
G01 X96.63825 Y39.85790
G01 X96.65070 Y39.85008
G01 X96.66987 Y39.82796
G01 X96.67914 Y39.80019
G01 X96.67709 Y39.77101
G01 X96.66401 Y39.74485
G01 X96.65390 Y39.73415
G01 X96.62847 Y39.71965
G01 X96.61412 Y39.71640
G01 X96.58494 Y39.71846
G01 X96.47597 Y39.77131
G01 X96.45644 Y39.78539
G01 X96.39944 Y39.84241
G01 X96.35255 Y39.81894
G01 X96.31902 Y39.81104
G01 X96.12855 Y39.81104
G01 X96.09500 Y39.81896
G01 X95.99977 Y39.86659
G01 X95.98029 Y39.88061
G01 X95.88504 Y39.97583
G01 X95.86975 Y39.99796
G01 X95.81770 Y40.20121
G01 X95.81547 Y40.55269
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X95.96546 Y40.22862 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X95.96546 Y40.22862
G01 X96.00579 Y40.06722
G01 X96.07775 Y39.99529
G01 X96.14625 Y39.96103
G01 X96.28082 Y39.96103
G01 X96.22697 Y40.01487
G01 X96.15844 Y40.04914
G01 X96.06629 Y40.05056
G01 X96.03927 Y40.06176
G01 X96.01857 Y40.08246
G01 X96.00737 Y40.10949
G01 X96.00594 Y40.12412
G01 X96.01166 Y40.15282
G01 X96.01857 Y40.16580
G01 X96.03927 Y40.18650
G01 X96.06629 Y40.19770
G01 X96.19340 Y40.19712
G01 X96.31526 Y40.13735
G01 X96.41427 Y40.03972
G01 X96.44176 Y40.06722
G01 X96.48212 Y40.22862
G01 X96.48212 Y40.54347
G01 X96.44176 Y40.70484
G01 X96.36982 Y40.77677
G01 X96.30129 Y40.81104
G01 X96.14625 Y40.81104
G01 X96.07775 Y40.77677
G01 X96.00579 Y40.70484
G01 X95.96546 Y40.54347
G01 X95.96546 Y40.22862
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X96.81547 Y40.88602 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X96.81547 Y40.88602
G01 X96.82118 Y40.91472
G01 X96.82809 Y40.92770
G01 X96.84879 Y40.94840
G01 X96.87582 Y40.95960
G01 X96.89047 Y40.96102
G01 X97.55712 Y40.96102
G01 X97.58598 Y40.95526
G01 X97.61041 Y40.93880
G01 X97.62662 Y40.91421
G01 X97.63210 Y40.88531
G01 X97.62606 Y40.85648
G01 X97.19748 Y39.85648
G01 X97.18092 Y39.83235
G01 X97.15639 Y39.81640
G01 X97.12761 Y39.81104
G01 X97.09898 Y39.81708
G01 X97.07485 Y39.83365
G01 X97.05890 Y39.85818
G01 X97.05354 Y39.88696
G01 X97.05959 Y39.91559
G01 X97.44338 Y40.81104
G01 X96.87582 Y40.81246
G01 X96.84879 Y40.82366
G01 X96.82809 Y40.84436
G01 X96.81689 Y40.87139
G01 X96.81547 Y40.88602
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X99.13997 Y52.52864 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X99.13997 Y52.52864
G01 X99.14414 Y52.50703
G01 X99.14096 Y52.48864
G01 X99.14515 Y52.46697
G01 X99.14198 Y52.44863
G01 X99.14668 Y52.42547
G01 X99.14396 Y52.40865
G01 X99.15295 Y52.34304
G01 X99.15097 Y52.32864
G01 X99.15694 Y52.30306
G01 X99.15496 Y52.28864
G01 X99.16095 Y52.26303
G01 X99.16014 Y52.23695
G01 X99.16560 Y52.22186
G01 X99.16514 Y52.19697
G01 X99.17124 Y52.18069
G01 X99.17114 Y52.15696
G01 X99.17800 Y52.13923
G01 X99.17812 Y52.11696
G01 X99.18501 Y52.09918
G01 X99.18513 Y52.07695
G01 X99.20086 Y52.01762
G01 X99.20114 Y51.99697
G01 X99.20970 Y51.97606
G01 X99.21013 Y51.95696
G01 X99.22958 Y51.89471
G01 X99.23014 Y51.87695
G01 X99.24056 Y51.85354
G01 X99.24114 Y51.83596
G01 X99.25234 Y51.81157
G01 X99.25653 Y51.78470
G01 X99.26525 Y51.77045
G01 X99.26954 Y51.74470
G01 X99.27825 Y51.73045
G01 X99.28254 Y51.70472
G01 X99.29214 Y51.68940
G01 X99.29654 Y51.66471
G01 X99.30614 Y51.64940
G01 X99.31053 Y51.62471
G01 X99.32204 Y51.60708
G01 X99.32654 Y51.58470
G01 X99.33804 Y51.56707
G01 X99.34254 Y51.54470
G01 X99.35516 Y51.52570
G01 X99.35953 Y51.50472
G01 X99.37218 Y51.48567
G01 X99.37655 Y51.46471
G01 X99.39136 Y51.44376
G01 X99.40108 Y51.41432
G01 X99.41036 Y51.40375
G01 X99.41455 Y51.38470
G01 X99.43045 Y51.36286
G01 X99.44007 Y51.33431
G01 X99.45262 Y51.32105
G01 X99.46207 Y51.29433
G01 X99.47353 Y51.28196
G01 X99.48308 Y51.25432
G01 X99.49672 Y51.24018
G01 X99.50609 Y51.21432
G01 X99.52080 Y51.19931
G01 X99.53007 Y51.17431
G01 X99.54589 Y51.15836
G01 X99.55514 Y51.13423
G01 X99.57195 Y51.11757
G01 X99.58107 Y51.09433
G01 X99.59900 Y51.07703
G01 X99.60807 Y51.05432
G01 X99.62600 Y51.03703
G01 X99.63507 Y51.01432
G01 X99.65633 Y50.99527
G01 X99.66507 Y50.97431
G01 X99.68633 Y50.95526
G01 X99.69506 Y50.93431
G01 X99.71754 Y50.91460
G01 X99.73355 Y50.88524
G01 X99.75092 Y50.87335
G01 X99.76654 Y50.84523
G01 X99.78511 Y50.83271
G01 X99.80055 Y50.80523
G01 X99.82138 Y50.79182
G01 X99.83654 Y50.76522
G01 X99.85849 Y50.75148
G01 X99.87355 Y50.72522
G01 X99.89659 Y50.71112
G01 X99.91155 Y50.68524
G01 X99.93789 Y50.67015
G01 X99.95254 Y50.64523
G01 X99.98000 Y50.62981
G01 X99.99456 Y50.60523
G01 X100.02420 Y50.58915
G01 X100.03108 Y50.57432
G01 X100.04764 Y50.55775
G01 X100.07032 Y50.54871
G01 X100.08455 Y50.52522
G01 X100.10403 Y50.51221
G01 X100.11841 Y50.50850
G01 X100.12509 Y50.49433
G01 X100.14165 Y50.47777
G01 X100.16946 Y50.46822
G01 X100.17606 Y50.45433
G01 X100.19263 Y50.43776
G01 X100.22356 Y50.42791
G01 X100.23006 Y50.41432
G01 X100.24663 Y50.39776
G01 X100.28066 Y50.38765
G01 X100.28709 Y50.37432
G01 X100.30365 Y50.35775
G01 X100.32529 Y50.34881
G01 X100.34066 Y50.34765
G01 X100.34708 Y50.33431
G01 X100.36364 Y50.31775
G01 X100.38528 Y50.30881
G01 X100.40464 Y50.30764
G01 X100.41853 Y50.28521
G01 X100.43801 Y50.27221
G01 X100.47266 Y50.26764
G01 X100.48655 Y50.24523
G01 X100.50604 Y50.23223
G01 X100.54566 Y50.22766
G01 X100.55955 Y50.20523
G01 X100.57904 Y50.19222
G01 X100.62564 Y50.18765
G01 X100.63954 Y50.16522
G01 X100.65902 Y50.15222
G01 X100.68198 Y50.14765
G01 X100.71264 Y50.14765
G01 X100.72653 Y50.12522
G01 X100.74601 Y50.11221
G01 X100.76898 Y50.10764
G01 X100.80865 Y50.10764
G01 X100.82255 Y50.08521
G01 X100.84203 Y50.07221
G01 X100.86499 Y50.06764
G01 X100.91866 Y50.06764
G01 X100.93255 Y50.04523
G01 X100.95203 Y50.03223
G01 X100.97500 Y50.02766
G01 X101.04665 Y50.02766
G01 X101.06054 Y50.00523
G01 X101.08002 Y49.99222
G01 X101.10299 Y49.98765
G01 X101.20565 Y49.98765
G01 X101.21955 Y49.96522
G01 X101.25028 Y49.94881
G01 X101.43964 Y49.94765
G01 X101.44606 Y49.93431
G01 X101.46263 Y49.91775
G01 X101.49598 Y49.90764
G01 X102.06400 Y49.90764
G01 X102.09732 Y49.91775
G01 X102.11388 Y49.93431
G01 X102.12031 Y49.94765
G01 X102.30966 Y49.94881
G01 X102.34040 Y49.96522
G01 X102.35429 Y49.98765
G01 X102.45698 Y49.98765
G01 X102.47992 Y49.99222
G01 X102.49940 Y50.00523
G01 X102.51330 Y50.02766
G01 X102.58498 Y50.02766
G01 X102.60791 Y50.03223
G01 X102.62739 Y50.04523
G01 X102.64129 Y50.06764
G01 X102.69498 Y50.06764
G01 X102.71792 Y50.07221
G01 X102.73740 Y50.08521
G01 X102.75129 Y50.10764
G01 X102.79099 Y50.10764
G01 X102.81393 Y50.11221
G01 X102.83341 Y50.12522
G01 X102.84731 Y50.14765
G01 X102.87799 Y50.14765
G01 X102.90093 Y50.15222
G01 X102.92041 Y50.16522
G01 X102.93430 Y50.18765
G01 X102.96968 Y50.18882
G01 X102.99132 Y50.19776
G01 X103.00789 Y50.21432
G01 X103.01431 Y50.22766
G01 X103.04268 Y50.22882
G01 X103.06432 Y50.23777
G01 X103.08088 Y50.25433
G01 X103.08731 Y50.26764
G01 X103.12193 Y50.27221
G01 X103.14141 Y50.28521
G01 X103.15531 Y50.30764
G01 X103.18591 Y50.31221
G01 X103.20540 Y50.32522
G01 X103.21929 Y50.34765
G01 X103.23468 Y50.34881
G01 X103.25632 Y50.35775
G01 X103.27288 Y50.37432
G01 X103.27931 Y50.38765
G01 X103.31332 Y50.39776
G01 X103.32988 Y50.41432
G01 X103.33638 Y50.42791
G01 X103.36732 Y50.43776
G01 X103.38388 Y50.45433
G01 X103.39049 Y50.46822
G01 X103.41832 Y50.47777
G01 X103.43488 Y50.49433
G01 X103.44156 Y50.50850
G01 X103.45592 Y50.51221
G01 X103.47540 Y50.52522
G01 X103.48962 Y50.54871
G01 X103.50192 Y50.55222
G01 X103.52140 Y50.56522
G01 X103.53575 Y50.58912
G01 X103.56542 Y50.60523
G01 X103.57997 Y50.62981
G01 X103.59831 Y50.63776
G01 X103.61487 Y50.65433
G01 X103.62206 Y50.67015
G01 X103.64840 Y50.68524
G01 X103.66336 Y50.71112
G01 X103.68640 Y50.72522
G01 X103.70146 Y50.75148
G01 X103.72340 Y50.76522
G01 X103.73857 Y50.79182
G01 X103.75939 Y50.80523
G01 X103.77484 Y50.83271
G01 X103.79341 Y50.84523
G01 X103.80903 Y50.87335
G01 X103.83387 Y50.89433
G01 X103.84240 Y50.91460
G01 X103.85741 Y50.92522
G01 X103.87362 Y50.95526
G01 X103.89488 Y50.97431
G01 X103.90362 Y50.99527
G01 X103.92488 Y51.01432
G01 X103.93394 Y51.03703
G01 X103.95188 Y51.05432
G01 X103.96094 Y51.07703
G01 X103.97888 Y51.09433
G01 X103.98799 Y51.11760
G01 X104.00486 Y51.13431
G01 X104.01406 Y51.15836
G01 X104.02988 Y51.17431
G01 X104.03915 Y51.19928
G01 X104.05388 Y51.21432
G01 X104.06326 Y51.24018
G01 X104.07687 Y51.25432
G01 X104.08642 Y51.28196
G01 X104.09788 Y51.29433
G01 X104.10732 Y51.32105
G01 X104.11987 Y51.33431
G01 X104.12950 Y51.36286
G01 X104.14540 Y51.38470
G01 X104.14959 Y51.40375
G01 X104.15886 Y51.41432
G01 X104.16856 Y51.44373
G01 X104.18342 Y51.46471
G01 X104.18779 Y51.48572
G01 X104.20042 Y51.50472
G01 X104.20478 Y51.52570
G01 X104.21741 Y51.54470
G01 X104.22190 Y51.56707
G01 X104.23341 Y51.58470
G01 X104.23791 Y51.60708
G01 X104.24941 Y51.62471
G01 X104.25381 Y51.64940
G01 X104.26341 Y51.66471
G01 X104.26780 Y51.68940
G01 X104.27740 Y51.70472
G01 X104.28169 Y51.73045
G01 X104.29041 Y51.74470
G01 X104.29470 Y51.77045
G01 X104.30341 Y51.78470
G01 X104.30760 Y51.81157
G01 X104.31880 Y51.83596
G01 X104.31939 Y51.85354
G01 X104.32980 Y51.87695
G01 X104.33036 Y51.89471
G01 X104.34982 Y51.95696
G01 X104.35025 Y51.97606
G01 X104.35881 Y51.99697
G01 X104.35909 Y52.01762
G01 X104.36681 Y52.03695
G01 X104.36709 Y52.05762
G01 X104.37481 Y52.07695
G01 X104.37494 Y52.09918
G01 X104.38182 Y52.11696
G01 X104.38195 Y52.13923
G01 X104.38881 Y52.15696
G01 X104.38871 Y52.18069
G01 X104.39480 Y52.19697
G01 X104.39434 Y52.22186
G01 X104.40382 Y52.27695
G01 X104.40301 Y52.30306
G01 X104.40781 Y52.31696
G01 X104.40699 Y52.34304
G01 X104.41299 Y52.36865
G01 X104.41065 Y52.38427
G01 X104.41598 Y52.40865
G01 X104.41329 Y52.42544
G01 X104.41799 Y52.44863
G01 X104.41482 Y52.46702
G01 X104.41898 Y52.48864
G01 X104.41581 Y52.50703
G01 X104.41997 Y52.52864
G01 X104.41629 Y52.54866
G01 X104.41997 Y52.56865
G01 X104.40986 Y52.60200
G01 X104.39330 Y52.61856
G01 X104.37166 Y52.62750
G01 X104.31499 Y52.62867
G01 X104.28190 Y53.02425
G01 X104.15109 Y53.48790
G01 X103.92274 Y53.93821
G01 X103.61802 Y54.32615
G01 X103.25360 Y54.64124
G01 X102.85599 Y54.86948
G01 X102.85599 Y55.85063
G01 X102.85142 Y55.87359
G01 X102.83842 Y55.89308
G01 X102.81893 Y55.90608
G01 X102.79600 Y55.91065
G01 X100.76400 Y55.91065
G01 X100.74104 Y55.90608
G01 X100.72155 Y55.89308
G01 X100.70855 Y55.87359
G01 X100.70398 Y55.85063
G01 X100.70398 Y54.86948
G01 X100.30634 Y54.64124
G01 X99.94193 Y54.32615
G01 X99.63720 Y53.93821
G01 X99.40886 Y53.48790
G01 X99.27805 Y53.02425
G01 X99.24493 Y52.62867
G01 X99.18828 Y52.62750
G01 X99.16664 Y52.61856
G01 X99.14455 Y52.59161
G01 X99.13997 Y52.56865
G01 X99.14366 Y52.54866
G01 X99.13997 Y52.52864
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X99.36532 Y52.62867 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X99.36532 Y52.62867
G01 X104.19462 Y52.62867
G01 X104.16483 Y52.99730
G01 X104.03719 Y53.44970
G01 X103.82462 Y53.86892
G01 X103.53509 Y54.23920
G01 X103.17954 Y54.54665
G01 X102.76625 Y54.78254
G01 X102.75602 Y54.78990
G01 X102.74121 Y54.81012
G01 X102.73598 Y54.83463
G01 X102.73598 Y55.79064
G01 X100.82399 Y55.79064
G01 X100.82399 Y54.83463
G01 X100.81876 Y54.81012
G01 X100.81241 Y54.79922
G01 X100.79372 Y54.78254
G01 X100.38041 Y54.54665
G01 X100.02486 Y54.23920
G01 X99.73532 Y53.86892
G01 X99.52275 Y53.44970
G01 X99.39512 Y52.99730
G01 X99.36532 Y52.62867
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X100.79615 Y51.86814 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X100.79615 Y51.86814
G01 X100.79999 Y51.84764
G01 X100.79631 Y51.82765
G01 X100.79999 Y51.80764
G01 X100.79631 Y51.78765
G01 X100.79999 Y51.76763
G01 X100.79631 Y51.74764
G01 X100.79999 Y51.72765
G01 X100.79631 Y51.70766
G01 X100.79999 Y51.68765
G01 X100.79631 Y51.66766
G01 X100.79999 Y51.64764
G01 X100.79631 Y51.62765
G01 X100.79999 Y51.60764
G01 X100.79631 Y51.58765
G01 X100.79999 Y51.56763
G01 X100.79631 Y51.54764
G01 X100.79999 Y51.52765
G01 X100.79631 Y51.50766
G01 X100.79999 Y51.48765
G01 X100.79631 Y51.46766
G01 X100.79999 Y51.44764
G01 X100.79631 Y51.42765
G01 X100.79999 Y51.40764
G01 X100.79631 Y51.38765
G01 X100.79999 Y51.36763
G01 X100.79631 Y51.34764
G01 X100.79999 Y51.32765
G01 X100.79631 Y51.30766
G01 X100.79999 Y51.28765
G01 X100.79631 Y51.26766
G01 X100.79999 Y51.24764
G01 X100.79631 Y51.22765
G01 X100.79999 Y51.20764
G01 X100.79631 Y51.18765
G01 X100.79999 Y51.16763
G01 X100.79631 Y51.14767
G01 X100.79999 Y51.12765
G01 X100.79631 Y51.10766
G01 X100.79999 Y51.08765
G01 X100.79631 Y51.06766
G01 X100.79999 Y51.04764
G01 X100.79631 Y51.02765
G01 X100.79999 Y51.00764
G01 X100.79631 Y50.98765
G01 X100.79999 Y50.96763
G01 X100.79631 Y50.94764
G01 X100.79999 Y50.92765
G01 X100.79631 Y50.90766
G01 X100.79999 Y50.88765
G01 X100.79631 Y50.86766
G01 X100.79999 Y50.84764
G01 X100.79631 Y50.82765
G01 X100.79999 Y50.80764
G01 X100.79631 Y50.78765
G01 X100.79999 Y50.76763
G01 X100.79631 Y50.74764
G01 X100.79999 Y50.72765
G01 X100.79631 Y50.70766
G01 X100.79999 Y50.68765
G01 X100.79631 Y50.66766
G01 X100.79999 Y50.64764
G01 X100.79631 Y50.62765
G01 X100.79999 Y50.60764
G01 X100.79631 Y50.58765
G01 X100.79999 Y50.56763
G01 X100.79631 Y50.54765
G01 X100.79999 Y50.52766
G01 X100.79631 Y50.50767
G01 X100.79999 Y50.48765
G01 X100.79631 Y50.46766
G01 X100.79999 Y50.44765
G01 X100.79631 Y50.42766
G01 X100.79999 Y50.40764
G01 X100.79631 Y50.38765
G01 X100.79918 Y50.35935
G01 X100.86194 Y50.32623
G01 X100.92384 Y50.30767
G01 X102.63608 Y50.30767
G01 X102.69801 Y50.32623
G01 X102.76077 Y50.35938
G01 X102.76364 Y50.38765
G01 X102.75996 Y50.40764
G01 X102.76364 Y50.42766
G01 X102.75996 Y50.44765
G01 X102.76364 Y50.46766
G01 X102.75996 Y50.48765
G01 X102.76364 Y50.50767
G01 X102.75996 Y50.52766
G01 X102.76364 Y50.54765
G01 X102.75996 Y50.56763
G01 X102.76364 Y50.58765
G01 X102.75996 Y50.60764
G01 X102.76364 Y50.62765
G01 X102.75996 Y50.64764
G01 X102.76364 Y50.66766
G01 X102.75996 Y50.68765
G01 X102.76364 Y50.70766
G01 X102.75996 Y50.72765
G01 X102.76364 Y50.74764
G01 X102.75996 Y50.76763
G01 X102.76364 Y50.78765
G01 X102.75996 Y50.80764
G01 X102.76364 Y50.82765
G01 X102.75996 Y50.84764
G01 X102.76364 Y50.86766
G01 X102.75996 Y50.88765
G01 X102.76364 Y50.90766
G01 X102.75996 Y50.92765
G01 X102.76364 Y50.94764
G01 X102.75996 Y50.96763
G01 X102.76364 Y50.98765
G01 X102.75996 Y51.00764
G01 X102.76364 Y51.02765
G01 X102.75996 Y51.04764
G01 X102.76364 Y51.06766
G01 X102.75996 Y51.08765
G01 X102.76364 Y51.10766
G01 X102.75996 Y51.12765
G01 X102.76364 Y51.14764
G01 X102.75996 Y51.16763
G01 X102.76364 Y51.18765
G01 X102.75996 Y51.20764
G01 X102.76364 Y51.22765
G01 X102.75996 Y51.24764
G01 X102.76364 Y51.26766
G01 X102.75996 Y51.28765
G01 X102.76364 Y51.30766
G01 X102.75996 Y51.32765
G01 X102.76364 Y51.34764
G01 X102.75996 Y51.36763
G01 X102.76364 Y51.38765
G01 X102.75996 Y51.40764
G01 X102.76364 Y51.42765
G01 X102.75996 Y51.44764
G01 X102.76364 Y51.46766
G01 X102.75996 Y51.48765
G01 X102.76364 Y51.50766
G01 X102.75996 Y51.52765
G01 X102.76364 Y51.54764
G01 X102.75996 Y51.56763
G01 X102.76364 Y51.58765
G01 X102.75996 Y51.60764
G01 X102.76364 Y51.62765
G01 X102.75996 Y51.64764
G01 X102.76364 Y51.66766
G01 X102.75996 Y51.68765
G01 X102.76364 Y51.70766
G01 X102.75996 Y51.72765
G01 X102.76364 Y51.74764
G01 X102.75996 Y51.76763
G01 X102.76364 Y51.78765
G01 X102.75996 Y51.80764
G01 X102.76364 Y51.82765
G01 X102.75996 Y51.84764
G01 X102.76379 Y51.86814
G01 X102.75996 Y51.88864
G01 X102.76364 Y51.90865
G01 X102.75996 Y51.92864
G01 X102.76364 Y51.94866
G01 X102.75996 Y51.96865
G01 X102.76364 Y51.98866
G01 X102.75996 Y52.00865
G01 X102.76364 Y52.06865
G01 X102.75996 Y52.08864
G01 X102.76364 Y52.10865
G01 X102.75996 Y52.12864
G01 X102.76364 Y52.14866
G01 X102.75996 Y52.20865
G01 X102.76364 Y52.22864
G01 X102.75996 Y52.24863
G01 X102.76364 Y52.26865
G01 X102.75996 Y52.28864
G01 X102.76364 Y52.30865
G01 X100.79631 Y52.30865
G01 X100.79999 Y52.28864
G01 X100.79631 Y52.26865
G01 X100.79999 Y52.24863
G01 X100.79631 Y52.22864
G01 X100.79999 Y52.20865
G01 X100.79631 Y52.18866
G01 X100.79999 Y52.16865
G01 X100.79631 Y52.14866
G01 X100.79999 Y52.12864
G01 X100.79631 Y52.10865
G01 X100.79999 Y52.08864
G01 X100.79631 Y52.06865
G01 X100.79999 Y52.04863
G01 X100.79631 Y51.98866
G01 X100.79999 Y51.96865
G01 X100.79631 Y51.94866
G01 X100.79999 Y51.88864
G01 X100.79615 Y51.86814
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X104.91761 Y52.21150 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X104.91761 Y52.21150
G01 X104.92144 Y52.23522
G01 X104.97641 Y52.39379
G01 X105.04616 Y52.46435
G01 X105.07318 Y52.47556
G01 X105.10247 Y52.47556
G01 X105.12950 Y52.46435
G01 X105.15020 Y52.44365
G01 X105.15711 Y52.43067
G01 X105.16282 Y52.40197
G01 X105.15711 Y52.37330
G01 X105.14085 Y52.34896
G01 X105.10575 Y52.31386
G01 X105.06760 Y52.19933
G01 X105.06760 Y52.12844
G01 X105.10575 Y52.01394
G01 X105.17989 Y51.93982
G01 X105.25685 Y51.90131
G01 X105.43041 Y51.85793
G01 X105.55479 Y51.85793
G01 X105.72833 Y51.90131
G01 X105.80529 Y51.93982
G01 X105.87943 Y52.01394
G01 X105.91761 Y52.12846
G01 X105.91761 Y52.19933
G01 X105.87943 Y52.31383
G01 X105.84433 Y52.34896
G01 X105.82807 Y52.37330
G01 X105.82236 Y52.40197
G01 X105.82378 Y52.41663
G01 X105.83498 Y52.44365
G01 X105.85568 Y52.46435
G01 X105.88271 Y52.47556
G01 X105.89736 Y52.47698
G01 X105.92604 Y52.47126
G01 X105.95037 Y52.45501
G01 X106.00877 Y52.39379
G01 X106.06663 Y52.22354
G01 X106.06663 Y52.10428
G01 X106.01613 Y51.94970
G01 X105.99800 Y51.92036
G01 X105.90275 Y51.82514
G01 X105.88327 Y51.81112
G01 X105.77270 Y51.75780
G01 X105.58223 Y51.71018
G01 X105.40298 Y51.71018
G01 X105.19714 Y51.76349
G01 X105.09160 Y51.81734
G01 X104.98718 Y51.92036
G01 X104.96904 Y51.94970
G01 X104.91857 Y52.10428
G01 X104.91962 Y52.95617
G01 X104.97311 Y52.84464
G01 X104.98718 Y52.82516
G01 X105.04397 Y52.76971
G01 X105.16584 Y52.70995
G01 X105.23069 Y52.70794
G01 X105.26422 Y52.71584
G01 X105.36978 Y52.76971
G01 X105.42116 Y52.81973
G01 X105.47255 Y52.76971
G01 X105.59442 Y52.70995
G01 X105.81936 Y52.70995
G01 X105.94120 Y52.76971
G01 X105.99800 Y52.82516
G01 X106.01204 Y52.84464
G01 X106.06559 Y52.95617
G01 X106.06559 Y53.18112
G01 X106.00582 Y53.30299
G01 X105.94120 Y53.36760
G01 X105.81936 Y53.42734
G01 X105.59442 Y53.42734
G01 X105.47255 Y53.36760
G01 X105.42116 Y53.31759
G01 X105.36978 Y53.36760
G01 X105.26419 Y53.42145
G01 X105.23069 Y53.42935
G01 X105.16584 Y53.42734
G01 X105.04397 Y53.36760
G01 X104.98718 Y53.31216
G01 X104.97311 Y53.29265
G01 X104.91962 Y53.18112
G01 X104.91962 Y52.95617
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X105.06760 Y52.99110 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X105.06760 Y52.99110
G01 X105.10184 Y52.92260
G01 X105.13226 Y52.89219
G01 X105.20079 Y52.85793
G01 X105.21296 Y52.85793
G01 X105.28149 Y52.89219
G01 X105.31192 Y52.92262
G01 X105.34618 Y52.99112
G01 X105.34618 Y53.14617
G01 X105.31192 Y53.21470
G01 X105.28152 Y53.24513
G01 X105.21299 Y53.27936
G01 X105.20077 Y53.27936
G01 X105.13224 Y53.24513
G01 X105.10184 Y53.21472
G01 X105.06760 Y53.14619
G01 X105.06760 Y52.99110
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X105.49617 Y52.99110 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X105.49617 Y52.99110
G01 X105.49617 Y53.14619
G01 X105.53041 Y53.21472
G01 X105.56081 Y53.24513
G01 X105.62934 Y53.27936
G01 X105.78444 Y53.27936
G01 X105.85294 Y53.24513
G01 X105.88334 Y53.21470
G01 X105.91761 Y53.14617
G01 X105.91761 Y52.99112
G01 X105.88334 Y52.92262
G01 X105.85291 Y52.89219
G01 X105.78441 Y52.85793
G01 X105.62937 Y52.85793
G01 X105.56084 Y52.89219
G01 X105.53041 Y52.92260
G01 X105.49617 Y52.99110
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X107.86998 Y57.48865 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X107.86998 Y57.48865
G01 X107.87115 Y62.94036
G01 X107.88756 Y62.97109
G01 X107.90704 Y62.98409
G01 X107.93000 Y62.98867
G01 X109.33998 Y62.98867
G01 X109.33998 Y63.94863
G01 X109.34455 Y63.97160
G01 X109.35755 Y63.99108
G01 X109.37704 Y64.00408
G01 X109.40000 Y64.00865
G01 X109.42293 Y64.00408
G01 X109.44242 Y63.99108
G01 X109.45542 Y63.97160
G01 X109.45999 Y63.94863
G01 X109.45999 Y62.98867
G01 X110.87000 Y62.98867
G01 X110.89293 Y62.98409
G01 X110.91242 Y62.97109
G01 X110.92542 Y62.95161
G01 X110.92999 Y62.92865
G01 X110.92882 Y57.47697
G01 X110.91242 Y57.44623
G01 X110.89293 Y57.43323
G01 X110.87000 Y57.42866
G01 X109.45999 Y57.42866
G01 X109.45999 Y56.46864
G01 X109.45542 Y56.44570
G01 X109.44242 Y56.42622
G01 X109.41168 Y56.40981
G01 X109.37704 Y56.41322
G01 X109.35755 Y56.42622
G01 X109.34455 Y56.44570
G01 X109.33998 Y56.46864
G01 X109.33998 Y57.42866
G01 X107.93000 Y57.42866
G01 X107.90704 Y57.43323
G01 X107.88756 Y57.44623
G01 X107.87455 Y57.46572
G01 X107.86998 Y57.48865
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X107.98999 Y57.54867 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X107.98999 Y57.54867
G01 X107.98999 Y61.84864
G01 X110.80998 Y61.84864
G01 X110.80998 Y57.54867
G01 X107.98999 Y57.54867
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X111.21056 Y60.67043 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X111.21056 Y60.67043
G01 X111.21981 Y60.69820
G01 X111.22832 Y60.71019
G01 X111.25143 Y60.72814
G01 X111.27965 Y60.73586
G01 X111.29436 Y60.73546
G01 X111.92428 Y60.52700
G01 X111.92428 Y60.82413
G01 X111.65128 Y60.82555
G01 X111.62425 Y60.83675
G01 X111.60355 Y60.85745
G01 X111.59235 Y60.88448
G01 X111.59235 Y60.91377
G01 X111.60355 Y60.94079
G01 X111.62425 Y60.96149
G01 X111.65128 Y60.97269
G01 X111.92428 Y60.97412
G01 X111.92428 Y61.04199
G01 X111.92999 Y61.07069
G01 X111.93690 Y61.08367
G01 X111.95760 Y61.10437
G01 X111.98463 Y61.11557
G01 X111.99928 Y61.11699
G01 X112.02796 Y61.11128
G01 X112.04094 Y61.10437
G01 X112.06164 Y61.08367
G01 X112.07284 Y61.05664
G01 X112.07426 Y60.97412
G01 X112.34724 Y60.97269
G01 X112.37426 Y60.96149
G01 X112.39496 Y60.94079
G01 X112.40616 Y60.91377
G01 X112.40616 Y60.88448
G01 X112.39496 Y60.85745
G01 X112.37426 Y60.83675
G01 X112.34724 Y60.82555
G01 X112.07426 Y60.82413
G01 X112.07294 Y60.40884
G01 X112.06250 Y60.38263
G01 X112.05379 Y60.37145
G01 X112.03090 Y60.35494
G01 X112.01754 Y60.35022
G01 X111.98935 Y60.34862
G01 X111.97556 Y60.35179
G01 X111.26126 Y60.58989
G01 X111.24782 Y60.59589
G01 X111.22572 Y60.61506
G01 X111.21264 Y60.64125
G01 X111.21056 Y60.67043
G01 X111.25857 Y59.72065
G01 X111.31643 Y59.89096
G01 X111.42242 Y59.99977
G01 X111.44190 Y60.01384
G01 X111.55250 Y60.06713
G01 X111.74297 Y60.11476
G01 X111.92222 Y60.11476
G01 X112.11269 Y60.06713
G01 X112.22328 Y60.01384
G01 X112.24277 Y59.99977
G01 X112.34876 Y59.89096
G01 X112.40662 Y59.72065
G01 X112.40616 Y59.45591
G01 X112.39496 Y59.42888
G01 X112.38562 Y59.41753
G01 X112.37426 Y59.40818
G01 X112.34724 Y59.39698
G01 X111.31795 Y59.39698
G01 X111.29093 Y59.40818
G01 X111.27023 Y59.42888
G01 X111.25902 Y59.45591
G01 X111.25857 Y59.72065
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X111.40759 Y59.54554 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X111.40759 Y59.54554
G01 X111.40759 Y59.69647
G01 X111.44576 Y59.81100
G01 X111.51988 Y59.88512
G01 X111.59687 Y59.92362
G01 X111.77040 Y59.96701
G01 X111.89479 Y59.96701
G01 X112.06832 Y59.92362
G01 X112.14531 Y59.88512
G01 X112.21942 Y59.81100
G01 X112.25760 Y59.69647
G01 X112.25760 Y59.54554
G01 X111.40759 Y59.54554
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X161.01308 Y12.58740 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X161.01308 Y12.58740
G01 X161.01450 Y12.57277
G01 X161.02570 Y12.54574
G01 X161.04640 Y12.52504
G01 X161.05938 Y12.51813
G01 X161.08808 Y12.51242
G01 X161.10271 Y12.51384
G01 X161.12974 Y12.52504
G01 X161.15044 Y12.54574
G01 X161.16164 Y12.57277
G01 X161.16306 Y13.03621
G01 X161.58450 Y13.03621
G01 X161.58592 Y12.57277
G01 X161.59713 Y12.54574
G01 X161.61783 Y12.52504
G01 X161.63081 Y12.51813
G01 X161.65951 Y12.51242
G01 X161.67414 Y12.51384
G01 X161.70116 Y12.52504
G01 X161.72186 Y12.54574
G01 X161.73307 Y12.57277
G01 X161.73449 Y12.58740
G01 X161.73449 Y13.58739
G01 X161.73307 Y13.60205
G01 X161.72186 Y13.62908
G01 X161.70116 Y13.64978
G01 X161.67414 Y13.66098
G01 X161.64485 Y13.66098
G01 X161.61783 Y13.64978
G01 X161.59713 Y13.62908
G01 X161.59022 Y13.61610
G01 X161.58450 Y13.58739
G01 X161.58450 Y13.18620
G01 X161.16306 Y13.18620
G01 X161.16164 Y13.60205
G01 X161.15044 Y13.62908
G01 X161.12974 Y13.64978
G01 X161.11676 Y13.65669
G01 X161.08808 Y13.66240
G01 X161.07343 Y13.66098
G01 X161.04640 Y13.64978
G01 X161.02570 Y13.62908
G01 X161.01450 Y13.60205
G01 X161.01308 Y13.58739
G01 X161.01308 Y12.58740
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X161.96687 Y12.69725 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X161.96687 Y12.69725
G01 X161.97114 Y12.71132
G01 X161.98740 Y12.73566
G01 X161.99875 Y12.74498
G01 X162.02580 Y12.75618
G01 X162.05506 Y12.75620
G01 X162.08209 Y12.74500
G01 X162.13248 Y12.69667
G01 X162.20104 Y12.66240
G01 X162.45130 Y12.66240
G01 X162.51983 Y12.69667
G01 X162.55023 Y12.72707
G01 X162.58450 Y12.79560
G01 X162.58450 Y12.99827
G01 X162.55023 Y13.06680
G01 X162.51983 Y13.09720
G01 X162.45130 Y13.13146
G01 X162.32618 Y13.13146
G01 X162.29824 Y13.13685
G01 X162.27431 Y13.15227
G01 X162.26499 Y13.16309
G01 X162.25788 Y13.17546
G01 X162.25125 Y13.20312
G01 X162.25539 Y13.23126
G01 X162.26972 Y13.25585
G01 X162.49420 Y13.51241
G01 X162.02580 Y13.51384
G01 X161.99878 Y13.52504
G01 X161.98742 Y13.53438
G01 X161.97807 Y13.54574
G01 X161.96687 Y13.57276
G01 X161.96687 Y13.60205
G01 X161.97807 Y13.62908
G01 X161.98742 Y13.64043
G01 X162.01175 Y13.65669
G01 X162.04046 Y13.66240
G01 X162.65951 Y13.66240
G01 X162.67370 Y13.66105
G01 X162.70012 Y13.65046
G01 X162.71135 Y13.64160
G01 X162.72778 Y13.61841
G01 X162.73441 Y13.59075
G01 X162.73370 Y13.57647
G01 X162.72428 Y13.54962
G01 X162.48887 Y13.27850
G01 X162.60812 Y13.21968
G01 X162.66492 Y13.16423
G01 X162.67894 Y13.14475
G01 X162.73248 Y13.03322
G01 X162.73248 Y12.76065
G01 X162.67271 Y12.63878
G01 X162.61729 Y12.58201
G01 X162.59781 Y12.56794
G01 X162.48625 Y12.51442
G01 X162.16609 Y12.51442
G01 X162.04422 Y12.57419
G01 X161.97810 Y12.64094
G01 X161.96690 Y12.66799
G01 X161.96687 Y12.69725
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X172.28999 Y22.91003 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X172.28999 Y22.91003
G01 X181.40996 Y22.91003
G01 X181.40996 Y33.79002
G01 X172.28999 Y33.79002
G01 X172.28999 Y22.91003
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X172.28999 Y21.79004 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X172.28999 Y21.79004
G01 X181.40996 Y21.79004
G01 X181.40996 Y22.79002
G01 X172.28999 Y22.79002
G01 X172.28999 Y21.79004
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X172.16998 Y21.73002 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X172.16998 Y21.73002
G01 X172.18009 Y21.69670
G01 X172.20704 Y21.67460
G01 X172.23000 Y21.67003
G01 X181.46998 Y21.67003
G01 X181.50331 Y21.68014
G01 X181.52541 Y21.70709
G01 X181.52998 Y21.73002
G01 X181.52998 Y34.97000
G01 X181.51987 Y35.00335
G01 X181.49292 Y35.02545
G01 X181.46998 Y35.03002
G01 X172.23000 Y35.03002
G01 X172.19665 Y35.01991
G01 X172.17455 Y34.99296
G01 X172.16998 Y34.97000
G01 X172.16998 Y21.73002
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X172.13998 Y17.30103 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X172.13998 Y17.30103
G01 X173.52997 Y17.30103
G01 X173.52997 Y20.45002
G01 X172.13998 Y20.45002
G01 X172.13998 Y17.30103
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X170.46759 Y15.58048 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X170.46759 Y15.58048
G01 X170.46902 Y15.56585
G01 X170.48022 Y15.53883
G01 X170.50092 Y15.51812
G01 X170.52794 Y15.50692
G01 X170.54260 Y15.50550
G01 X170.57128 Y15.51122
G01 X170.58425 Y15.51812
G01 X170.60496 Y15.53883
G01 X170.61616 Y15.56585
G01 X170.61758 Y16.03425
G01 X170.87414 Y15.80977
G01 X170.88575 Y15.80144
G01 X170.91260 Y15.79201
G01 X170.94102 Y15.79328
G01 X170.95454 Y15.79793
G01 X170.97773 Y15.81436
G01 X170.99314 Y15.83829
G01 X170.99853 Y15.86621
G01 X170.99853 Y15.99135
G01 X171.03279 Y16.05988
G01 X171.06320 Y16.09031
G01 X171.13170 Y16.12455
G01 X171.33442 Y16.12455
G01 X171.40295 Y16.09031
G01 X171.43335 Y16.05991
G01 X171.46759 Y15.99138
G01 X171.46759 Y15.74106
G01 X171.43335 Y15.67253
G01 X171.38499 Y15.62216
G01 X171.37379 Y15.59514
G01 X171.37379 Y15.56585
G01 X171.38499 Y15.53883
G01 X171.40569 Y15.51812
G01 X171.43272 Y15.50692
G01 X171.46200 Y15.50692
G01 X171.48903 Y15.51812
G01 X171.55583 Y15.58427
G01 X171.61557 Y15.70613
G01 X171.61758 Y16.00906
G01 X171.60968 Y16.04258
G01 X171.55583 Y16.14817
G01 X171.49121 Y16.21279
G01 X171.36934 Y16.27253
G01 X171.09678 Y16.27253
G01 X170.98524 Y16.21904
G01 X170.96576 Y16.20497
G01 X170.91031 Y16.14817
G01 X170.85149 Y16.02892
G01 X170.58037 Y16.26433
G01 X170.55352 Y16.27375
G01 X170.52510 Y16.27248
G01 X170.49922 Y16.26072
G01 X170.47953 Y16.24017
G01 X170.46894 Y16.21375
G01 X170.46759 Y16.19953
G01 X170.46960 Y14.80136
G01 X170.46960 Y15.02630
G01 X170.52937 Y15.14817
G01 X170.63244 Y15.25259
G01 X170.65454 Y15.26786
G01 X170.87595 Y15.32216
G01 X171.20927 Y15.32216
G01 X171.43066 Y15.26786
G01 X171.45276 Y15.25259
G01 X171.49497 Y15.21038
G01 X171.52858 Y15.24398
G01 X171.57859 Y15.34078
G01 X171.60069 Y15.35996
G01 X171.62845 Y15.36920
G01 X171.65763 Y15.36712
G01 X171.68382 Y15.35404
G01 X171.70300 Y15.33194
G01 X171.71224 Y15.30418
G01 X171.71265 Y15.28947
G01 X171.70493 Y15.26125
G01 X171.65105 Y15.15569
G01 X171.58623 Y15.08950
G01 X171.60968 Y15.04259
G01 X171.61758 Y15.00906
G01 X171.61557 Y14.80136
G01 X171.55583 Y14.67952
G01 X171.45276 Y14.57510
G01 X171.43066 Y14.55981
G01 X171.20927 Y14.50550
G01 X170.85774 Y14.50774
G01 X170.65454 Y14.55981
G01 X170.63244 Y14.57510
G01 X170.52937 Y14.67952
G01 X170.46960 Y14.80136
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X170.61758 Y14.83631 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X170.61758 Y14.83631
G01 X170.65184 Y14.76781
G01 X170.72380 Y14.69585
G01 X170.88517 Y14.65549
G01 X171.20003 Y14.65549
G01 X171.36139 Y14.69585
G01 X171.43335 Y14.76778
G01 X171.46759 Y14.83629
G01 X171.46759 Y14.97086
G01 X171.41374 Y14.91703
G01 X171.37950 Y14.84853
G01 X171.37808 Y14.75633
G01 X171.36688 Y14.72930
G01 X171.34618 Y14.70860
G01 X171.31915 Y14.69740
G01 X171.30452 Y14.69598
G01 X171.27582 Y14.70169
G01 X171.26284 Y14.70860
G01 X171.24214 Y14.72930
G01 X171.23094 Y14.75633
G01 X171.23152 Y14.88345
G01 X171.29126 Y15.00530
G01 X171.38890 Y15.10431
G01 X171.36139 Y15.13182
G01 X171.20003 Y15.17218
G01 X170.88517 Y15.17218
G01 X170.72380 Y15.13182
G01 X170.65184 Y15.05988
G01 X170.61758 Y14.99135
G01 X170.61758 Y14.83631
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X172.13998 Y13.60004 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X172.13998 Y13.60004
G01 X173.52997 Y13.60004
G01 X173.52997 Y17.18101
G01 X172.13998 Y17.18101
G01 X172.13998 Y13.60004
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X172.01996 Y10.27000 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X172.01996 Y10.27000
G01 X172.02454 Y10.24707
G01 X172.04663 Y10.22012
G01 X172.07998 Y10.21001
G01 X176.72100 Y10.21001
G01 X176.74393 Y10.21458
G01 X176.77088 Y10.23668
G01 X176.78099 Y10.27000
G01 X176.78099 Y20.51001
G01 X176.77642 Y20.53297
G01 X176.75432 Y20.55992
G01 X176.72100 Y20.57003
G01 X172.07998 Y20.57003
G01 X172.05702 Y20.56546
G01 X172.03007 Y20.54336
G01 X172.01996 Y20.51001
G01 X172.01996 Y10.27000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X172.13998 Y10.33002 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X172.13998 Y10.33002
G01 X173.52997 Y10.33002
G01 X173.52997 Y13.48003
G01 X172.13998 Y13.48003
G01 X172.13998 Y10.33002
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X173.64998 Y10.33002 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X173.64998 Y10.33002
G01 X176.66098 Y10.33002
G01 X176.66098 Y20.45002
G01 X173.64998 Y20.45002
G01 X173.64998 Y10.33002
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X189.97997 Y2.77002 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X189.97997 Y2.77002
G01 X189.98455 Y2.74708
G01 X190.00664 Y2.72013
G01 X190.03999 Y2.71002
G01 X197.65999 Y2.71002
G01 X197.68293 Y2.71459
G01 X197.70988 Y2.73669
G01 X197.71999 Y2.77002
G01 X197.71999 Y12.93002
G01 X197.71542 Y12.95298
G01 X197.69329 Y12.97993
G01 X197.65999 Y12.99004
G01 X190.03999 Y12.99004
G01 X190.01703 Y12.98546
G01 X189.99008 Y12.96337
G01 X189.97997 Y12.93002
G01 X189.97997 Y2.77002
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X190.09999 Y2.83004 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X190.09999 Y2.83004
G01 X191.24997 Y2.83004
G01 X191.24997 Y12.87002
G01 X190.09999 Y12.87002
G01 X190.09999 Y2.83004
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X191.36999 Y2.83004 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X191.36999 Y2.83004
G01 X197.59997 Y2.83004
G01 X197.59997 Y12.87002
G01 X191.36999 Y12.87002
G01 X191.36999 Y2.83004
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X198.31758 Y7.89764 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X198.31758 Y7.89764
G01 X198.31897 Y7.88301
G01 X198.33017 Y7.85599
G01 X198.35090 Y7.83528
G01 X198.37793 Y7.82408
G01 X198.39258 Y7.82266
G01 X198.42126 Y7.82838
G01 X198.43424 Y7.83528
G01 X198.45491 Y7.85599
G01 X198.46614 Y7.88301
G01 X198.46756 Y8.35141
G01 X198.72410 Y8.12690
G01 X198.74869 Y8.11258
G01 X198.77683 Y8.10844
G01 X198.79101 Y8.11042
G01 X198.81689 Y8.12218
G01 X198.82771 Y8.13150
G01 X198.84310 Y8.15543
G01 X198.84851 Y8.18334
G01 X198.84851 Y8.30851
G01 X198.88278 Y8.37702
G01 X198.91323 Y8.40744
G01 X198.98171 Y8.44171
G01 X199.18440 Y8.44171
G01 X199.25293 Y8.40744
G01 X199.28333 Y8.37704
G01 X199.31757 Y8.30851
G01 X199.31757 Y8.05822
G01 X199.28333 Y7.98969
G01 X199.23497 Y7.93932
G01 X199.22377 Y7.91230
G01 X199.22377 Y7.88301
G01 X199.23497 Y7.85599
G01 X199.25570 Y7.83528
G01 X199.28272 Y7.82408
G01 X199.31201 Y7.82408
G01 X199.33904 Y7.83528
G01 X199.40581 Y7.90140
G01 X199.46558 Y8.02327
G01 X199.46759 Y8.32622
G01 X199.45966 Y8.35977
G01 X199.40581 Y8.46531
G01 X199.34122 Y8.52992
G01 X199.21935 Y8.58969
G01 X198.94678 Y8.58969
G01 X198.83525 Y8.53615
G01 X198.81577 Y8.52210
G01 X198.76032 Y8.46531
G01 X198.70147 Y8.34605
G01 X198.43035 Y8.58149
G01 X198.40350 Y8.59091
G01 X198.37508 Y8.58964
G01 X198.34917 Y8.57788
G01 X198.32951 Y8.55733
G01 X198.32296 Y8.54463
G01 X198.31758 Y8.51669
G01 X198.31897 Y7.50206
G01 X198.31897 Y7.53135
G01 X198.33017 Y7.55837
G01 X198.35090 Y7.57907
G01 X198.37793 Y7.59028
G01 X198.39258 Y7.59170
G01 X199.10688 Y7.59170
G01 X199.13058 Y7.58786
G01 X199.27345 Y7.54024
G01 X199.30279 Y7.52210
G01 X199.39801 Y7.42685
G01 X199.41613 Y7.39754
G01 X199.46662 Y7.24301
G01 X199.46759 Y7.13572
G01 X199.46185 Y7.10704
G01 X199.45496 Y7.09406
G01 X199.43424 Y7.07336
G01 X199.40723 Y7.06216
G01 X199.37792 Y7.06216
G01 X199.35092 Y7.07336
G01 X199.33022 Y7.09406
G01 X199.31902 Y7.12109
G01 X199.31757 Y7.21880
G01 X199.27942 Y7.33333
G01 X199.20922 Y7.40354
G01 X199.09469 Y7.44171
G01 X198.37793 Y7.44313
G01 X198.35090 Y7.45434
G01 X198.33017 Y7.47504
G01 X198.31897 Y7.50206
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X189.97997 Y14.77002 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X189.97997 Y14.77002
G01 X189.98455 Y14.74708
G01 X190.00664 Y14.72013
G01 X190.03999 Y14.71002
G01 X197.65999 Y14.71002
G01 X197.68293 Y14.71460
G01 X197.70988 Y14.73669
G01 X197.71999 Y14.77002
G01 X197.71999 Y24.93002
G01 X197.71542 Y24.95298
G01 X197.69329 Y24.97993
G01 X197.65999 Y24.99004
G01 X190.03999 Y24.99004
G01 X190.01703 Y24.98547
G01 X189.99008 Y24.96337
G01 X189.97997 Y24.93002
G01 X189.97997 Y14.77002
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X190.09999 Y14.83004 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X190.09999 Y14.83004
G01 X191.24997 Y14.83004
G01 X191.24997 Y24.87002
G01 X190.09999 Y24.87002
G01 X190.09999 Y14.83004
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X191.36999 Y14.83004 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X191.36999 Y14.83004
G01 X197.59997 Y14.83004
G01 X197.59997 Y24.87002
G01 X191.36999 Y24.87002
G01 X191.36999 Y14.83004
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X198.31897 Y19.50204 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X198.31897 Y19.50204
G01 X198.33017 Y19.47501
G01 X198.35090 Y19.45431
G01 X198.37793 Y19.44311
G01 X199.09469 Y19.44169
G01 X199.20922 Y19.40354
G01 X199.27942 Y19.33333
G01 X199.31757 Y19.21880
G01 X199.31902 Y19.12109
G01 X199.33022 Y19.09406
G01 X199.33957 Y19.08271
G01 X199.35092 Y19.07336
G01 X199.37792 Y19.06216
G01 X199.40723 Y19.06216
G01 X199.43424 Y19.07336
G01 X199.45496 Y19.09406
G01 X199.46185 Y19.10704
G01 X199.46759 Y19.13572
G01 X199.46662 Y19.24301
G01 X199.41613 Y19.39754
G01 X199.39801 Y19.42685
G01 X199.30279 Y19.52210
G01 X199.27345 Y19.54024
G01 X199.13058 Y19.58784
G01 X199.10688 Y19.59167
G01 X198.39258 Y19.59167
G01 X198.37793 Y19.59025
G01 X198.35090 Y19.57905
G01 X198.33017 Y19.55835
G01 X198.31897 Y19.53132
G01 X198.31897 Y19.50204
G01 X198.31758 Y20.32619
G01 X198.32547 Y20.35975
G01 X198.37935 Y20.46531
G01 X198.44394 Y20.52993
G01 X198.56583 Y20.58969
G01 X198.67833 Y20.59170
G01 X198.70203 Y20.58786
G01 X198.84485 Y20.54024
G01 X198.87419 Y20.52210
G01 X199.31757 Y20.07872
G01 X199.31902 Y20.53135
G01 X199.33022 Y20.55837
G01 X199.35092 Y20.57907
G01 X199.37792 Y20.59028
G01 X199.39260 Y20.59170
G01 X199.42128 Y20.58598
G01 X199.43424 Y20.57907
G01 X199.45496 Y20.55837
G01 X199.46616 Y20.53135
G01 X199.46759 Y20.51669
G01 X199.46759 Y19.89764
G01 X199.46185 Y19.86897
G01 X199.45496 Y19.85599
G01 X199.43424 Y19.83529
G01 X199.40723 Y19.82408
G01 X199.37792 Y19.82408
G01 X199.35092 Y19.83529
G01 X198.78064 Y20.40353
G01 X198.66614 Y20.44171
G01 X198.60079 Y20.44171
G01 X198.53226 Y20.40745
G01 X198.50183 Y20.37702
G01 X198.46756 Y20.30849
G01 X198.46756 Y20.10585
G01 X198.50183 Y20.03732
G01 X198.55016 Y19.98692
G01 X198.56139 Y19.95990
G01 X198.56281 Y19.94524
G01 X198.56139 Y19.93061
G01 X198.55016 Y19.90359
G01 X198.52949 Y19.88289
G01 X198.50246 Y19.87168
G01 X198.48783 Y19.87026
G01 X198.45913 Y19.87598
G01 X198.43480 Y19.89223
G01 X198.37935 Y19.94903
G01 X198.31958 Y20.07090
G01 X198.31758 Y20.32619
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X198.23896 Y31.53133 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X198.23896 Y31.53133
G01 X198.23896 Y31.50204
G01 X198.25019 Y31.47501
G01 X198.27089 Y31.45431
G01 X198.29792 Y31.44311
G01 X199.01470 Y31.44169
G01 X199.12923 Y31.40354
G01 X199.19941 Y31.33333
G01 X199.23756 Y31.21883
G01 X199.23896 Y31.12109
G01 X199.25019 Y31.09406
G01 X199.25953 Y31.08271
G01 X199.27089 Y31.07336
G01 X199.29791 Y31.06216
G01 X199.32720 Y31.06216
G01 X199.35423 Y31.07336
G01 X199.37490 Y31.09406
G01 X199.38183 Y31.10704
G01 X199.38755 Y31.13572
G01 X199.38658 Y31.24298
G01 X199.33614 Y31.39752
G01 X199.31800 Y31.42686
G01 X199.22275 Y31.52211
G01 X199.19344 Y31.54024
G01 X199.05057 Y31.58784
G01 X199.02687 Y31.59168
G01 X198.31257 Y31.59168
G01 X198.29792 Y31.59025
G01 X198.27089 Y31.57905
G01 X198.25019 Y31.55835
G01 X198.23896 Y31.53133
G01 X198.23896 Y32.24557
G01 X198.23901 Y32.21629
G01 X198.24328 Y32.20222
G01 X198.25959 Y32.17788
G01 X198.40764 Y32.07745
G01 X198.48905 Y31.99607
G01 X198.53906 Y31.89927
G01 X198.56114 Y31.88009
G01 X198.57460 Y31.87410
G01 X198.60363 Y31.87044
G01 X198.63185 Y31.87816
G01 X198.64430 Y31.88601
G01 X198.66345 Y31.90811
G01 X198.67272 Y31.93587
G01 X198.67310 Y31.95058
G01 X198.66538 Y31.97880
G01 X198.61153 Y32.08436
G01 X198.54125 Y32.15599
G01 X199.23756 Y32.15599
G01 X199.23896 Y31.93061
G01 X199.25019 Y31.90359
G01 X199.27089 Y31.88289
G01 X199.28387 Y31.87598
G01 X199.31257 Y31.87026
G01 X199.32720 Y31.87169
G01 X199.35423 Y31.88289
G01 X199.36558 Y31.89223
G01 X199.37490 Y31.90359
G01 X199.38613 Y31.93061
G01 X199.38755 Y32.51667
G01 X199.38613 Y32.53132
G01 X199.37490 Y32.55835
G01 X199.35423 Y32.57905
G01 X199.32720 Y32.59025
G01 X199.29791 Y32.59025
G01 X199.27089 Y32.57905
G01 X199.25019 Y32.55835
G01 X199.24328 Y32.54537
G01 X199.23756 Y32.51667
G01 X199.23756 Y32.30597
G01 X198.31257 Y32.30597
G01 X198.28382 Y32.30026
G01 X198.27086 Y32.29333
G01 X198.25019 Y32.27262
G01 X198.23896 Y32.24557
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X191.28995 Y26.83004 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X191.28995 Y26.83004
G01 X197.51991 Y26.83004
G01 X197.51991 Y36.87002
G01 X191.28995 Y36.87002
G01 X191.28995 Y26.83004
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X190.01998 Y26.83004 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X190.01998 Y26.83004
G01 X191.16991 Y26.83004
G01 X191.16991 Y36.87002
G01 X190.01998 Y36.87002
G01 X190.01998 Y26.83004
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X189.89996 Y26.77002 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X189.89996 Y26.77002
G01 X189.90454 Y26.74708
G01 X189.92663 Y26.72013
G01 X189.95998 Y26.71002
G01 X197.57996 Y26.71002
G01 X197.60287 Y26.71460
G01 X197.62982 Y26.73669
G01 X197.63995 Y26.77002
G01 X197.63995 Y36.93002
G01 X197.63536 Y36.95298
G01 X197.61328 Y36.97993
G01 X197.57996 Y36.99004
G01 X189.95998 Y36.99004
G01 X189.93702 Y36.98547
G01 X189.91007 Y36.96337
G01 X189.89996 Y36.93002
G01 X189.89996 Y26.77002
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X182.13760 Y27.68693 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X182.13760 Y27.68693
G01 X182.51141 Y27.68693
G01 X182.51141 Y27.97517
G01 X182.47714 Y28.04368
G01 X182.44672 Y28.07411
G01 X182.37821 Y28.10837
G01 X182.27079 Y28.10837
G01 X182.20227 Y28.07411
G01 X182.17184 Y28.04370
G01 X182.13760 Y27.97520
G01 X182.13760 Y27.68693
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X181.98761 Y27.61193 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X181.98761 Y27.61193
G01 X181.98962 Y28.01012
G01 X182.04936 Y28.13197
G01 X182.10481 Y28.18876
G01 X182.12429 Y28.20283
G01 X182.23584 Y28.25635
G01 X182.39594 Y28.25836
G01 X182.42947 Y28.25043
G01 X182.53501 Y28.19658
G01 X182.59180 Y28.14114
G01 X182.60585 Y28.12165
G01 X182.65347 Y28.02643
G01 X182.66127 Y27.99397
G01 X183.03241 Y28.25201
G01 X183.06096 Y28.25836
G01 X183.08979 Y28.25325
G01 X183.11448 Y28.23753
G01 X183.13125 Y28.21355
G01 X183.13760 Y28.18500
G01 X183.13249 Y28.15617
G01 X183.11677 Y28.13148
G01 X182.66140 Y27.81096
G01 X182.66140 Y27.68693
G01 X183.07724 Y27.68551
G01 X183.10427 Y27.67431
G01 X183.12497 Y27.65361
G01 X183.13617 Y27.62658
G01 X183.13617 Y27.59730
G01 X183.12497 Y27.57027
G01 X183.10427 Y27.54957
G01 X183.07724 Y27.53837
G01 X183.06261 Y27.53695
G01 X182.06262 Y27.53695
G01 X182.04796 Y27.53837
G01 X182.02094 Y27.54957
G01 X182.00023 Y27.57027
G01 X181.98903 Y27.59730
G01 X181.98761 Y27.61193
G01 X181.98761 Y28.94525
G01 X181.98962 Y28.68993
G01 X182.04936 Y28.56809
G01 X182.10481 Y28.51129
G01 X182.12914 Y28.49503
G01 X182.15784 Y28.48932
G01 X182.17247 Y28.49074
G01 X182.19950 Y28.50194
G01 X182.22020 Y28.52264
G01 X182.23140 Y28.54967
G01 X182.23282 Y28.56430
G01 X182.23140 Y28.57896
G01 X182.22020 Y28.60598
G01 X182.17184 Y28.65635
G01 X182.13760 Y28.72485
G01 X182.13760 Y28.92757
G01 X182.17184 Y28.99608
G01 X182.20224 Y29.02648
G01 X182.27079 Y29.06074
G01 X182.33612 Y29.06074
G01 X182.45063 Y29.02257
G01 X183.02093 Y28.45432
G01 X183.04796 Y28.44312
G01 X183.07724 Y28.44312
G01 X183.09132 Y28.44741
G01 X183.11562 Y28.46367
G01 X183.13188 Y28.48800
G01 X183.13760 Y28.51668
G01 X183.13617 Y29.15038
G01 X183.12497 Y29.17741
G01 X183.10427 Y29.19811
G01 X183.09129 Y29.20502
G01 X183.06261 Y29.21073
G01 X183.04796 Y29.20931
G01 X183.02093 Y29.19811
G01 X183.00023 Y29.17741
G01 X182.98903 Y29.15038
G01 X182.98761 Y28.69775
G01 X182.54417 Y29.14113
G01 X182.51486 Y29.15927
G01 X182.37201 Y29.20690
G01 X182.34832 Y29.21073
G01 X182.23584 Y29.20872
G01 X182.11398 Y29.14896
G01 X182.04936 Y29.08437
G01 X181.99551 Y28.97878
G01 X181.98761 Y28.94525
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X172.28999 Y33.91004 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X172.28999 Y33.91004
G01 X181.40996 Y33.91004
G01 X181.40996 Y34.91001
G01 X172.28999 Y34.91001
G01 X172.28999 Y33.91004
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X188.96631 Y43.45904 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X188.96631 Y43.45904
G01 X188.96999 Y43.51901
G01 X188.96631 Y43.53902
G01 X188.96999 Y43.55901
G01 X188.96631 Y43.57903
G01 X188.96999 Y43.59902
G01 X188.96631 Y43.61903
G01 X188.96999 Y43.63902
G01 X188.96631 Y43.65901
G01 X188.96999 Y43.67900
G01 X188.96631 Y43.69902
G01 X188.96999 Y43.71901
G01 X188.96631 Y43.73902
G01 X188.96999 Y43.75901
G01 X188.96631 Y43.77903
G01 X188.96999 Y43.79902
G01 X188.96631 Y43.81903
G01 X188.96999 Y43.83902
G01 X188.96631 Y43.85901
G01 X188.96999 Y43.87900
G01 X188.96631 Y43.89902
G01 X188.96999 Y43.91901
G01 X188.96631 Y43.93902
G01 X188.96999 Y43.95901
G01 X188.96631 Y43.97903
G01 X188.96999 Y43.99902
G01 X188.96631 Y44.01903
G01 X188.96999 Y44.03902
G01 X188.96631 Y44.05901
G01 X188.96999 Y44.07900
G01 X188.96631 Y44.09902
G01 X188.96999 Y44.11901
G01 X188.96631 Y44.13902
G01 X188.96999 Y44.15901
G01 X188.96631 Y44.17903
G01 X188.96999 Y44.19902
G01 X188.96631 Y44.21903
G01 X188.96999 Y44.23902
G01 X188.96631 Y44.25901
G01 X188.96999 Y44.27900
G01 X188.96631 Y44.29902
G01 X188.96999 Y44.31901
G01 X188.96631 Y44.33902
G01 X188.96999 Y44.35901
G01 X188.96631 Y44.37903
G01 X188.96999 Y44.39902
G01 X188.96631 Y44.41903
G01 X188.96999 Y44.43902
G01 X188.96631 Y44.45901
G01 X188.96999 Y44.47900
G01 X188.96631 Y44.49902
G01 X188.96999 Y44.51901
G01 X188.96631 Y44.53902
G01 X188.96999 Y44.55901
G01 X188.96631 Y44.57903
G01 X188.96999 Y44.59902
G01 X188.96631 Y44.61903
G01 X188.96999 Y44.63902
G01 X188.96631 Y44.65901
G01 X188.96999 Y44.67900
G01 X188.96631 Y44.69902
G01 X188.96999 Y44.71901
G01 X188.96631 Y44.73902
G01 X188.96999 Y44.75901
G01 X188.96631 Y44.77903
G01 X188.96999 Y44.79902
G01 X188.96631 Y44.81903
G01 X188.96999 Y44.83902
G01 X188.96631 Y44.85901
G01 X188.96999 Y44.87900
G01 X188.96631 Y44.89902
G01 X188.96999 Y44.91900
G01 X188.96631 Y44.93902
G01 X188.96999 Y44.95901
G01 X188.96631 Y44.97903
G01 X188.96999 Y44.99902
G01 X188.96631 Y45.01903
G01 X188.96999 Y45.03902
G01 X188.96631 Y45.05904
G01 X188.96999 Y45.07903
G01 X188.96631 Y45.09901
G01 X188.96999 Y45.11900
G01 X188.96631 Y45.13902
G01 X188.96999 Y45.15901
G01 X188.96631 Y45.17902
G01 X188.96999 Y45.19901
G01 X188.96631 Y45.21903
G01 X188.96999 Y45.23902
G01 X188.96631 Y45.25903
G01 X188.96999 Y45.27902
G01 X188.96631 Y45.29901
G01 X188.96999 Y45.31900
G01 X188.96631 Y45.33902
G01 X188.96999 Y45.35901
G01 X188.96631 Y45.37902
G01 X188.96999 Y45.39901
G01 X188.96631 Y45.41903
G01 X188.96999 Y45.43902
G01 X188.96631 Y45.45903
G01 X188.96999 Y45.47902
G01 X188.96631 Y45.49901
G01 X188.96999 Y45.51900
G01 X188.96631 Y45.53902
G01 X188.96999 Y45.55901
G01 X188.96631 Y45.57902
G01 X188.96999 Y45.59901
G01 X188.96631 Y45.61903
G01 X188.96999 Y45.63902
G01 X188.96631 Y45.65903
G01 X188.96999 Y45.67902
G01 X188.96631 Y45.69901
G01 X188.96999 Y45.71900
G01 X188.96631 Y45.73902
G01 X188.96999 Y45.75901
G01 X188.96631 Y45.77902
G01 X188.96999 Y45.79901
G01 X188.96631 Y45.81903
G01 X188.96999 Y45.83902
G01 X188.96631 Y45.85903
G01 X188.96999 Y45.87902
G01 X188.96631 Y45.89901
G01 X188.96999 Y45.91900
G01 X188.96631 Y45.93902
G01 X188.96999 Y45.95901
G01 X188.96631 Y45.97902
G01 X188.96999 Y45.99901
G01 X188.96631 Y46.01903
G01 X188.96999 Y46.03902
G01 X188.96631 Y46.05903
G01 X188.96999 Y46.07902
G01 X188.96631 Y46.09901
G01 X188.96999 Y46.11900
G01 X188.96631 Y46.13902
G01 X188.96999 Y46.15901
G01 X188.96631 Y46.17902
G01 X188.96999 Y46.23902
G01 X188.96631 Y46.25901
G01 X191.73364 Y46.25901
G01 X191.72996 Y46.19901
G01 X191.73364 Y46.17902
G01 X191.72996 Y46.15901
G01 X191.73364 Y46.13902
G01 X191.72996 Y46.11900
G01 X191.73364 Y46.09901
G01 X191.72996 Y46.07902
G01 X191.73364 Y46.05903
G01 X191.72996 Y46.03902
G01 X191.73364 Y46.01903
G01 X191.72996 Y45.99901
G01 X191.73364 Y45.97902
G01 X191.72996 Y45.95901
G01 X191.73364 Y45.93902
G01 X191.72996 Y45.91900
G01 X191.73364 Y45.89901
G01 X191.72996 Y45.87902
G01 X191.73364 Y45.85903
G01 X191.72996 Y45.83902
G01 X191.73364 Y45.81903
G01 X191.72996 Y45.79901
G01 X191.73364 Y45.77902
G01 X191.72996 Y45.75901
G01 X191.73364 Y45.73902
G01 X191.72996 Y45.71900
G01 X191.73364 Y45.69901
G01 X191.72996 Y45.67902
G01 X191.73364 Y45.65903
G01 X191.72996 Y45.63902
G01 X191.73364 Y45.61903
G01 X191.72996 Y45.59901
G01 X191.73364 Y45.57902
G01 X191.72996 Y45.55901
G01 X191.73364 Y45.53902
G01 X191.72996 Y45.51900
G01 X191.73364 Y45.49901
G01 X191.72996 Y45.47902
G01 X191.73364 Y45.45903
G01 X191.72996 Y45.43902
G01 X191.73364 Y45.41903
G01 X191.72996 Y45.39901
G01 X191.73364 Y45.37902
G01 X191.72996 Y45.35901
G01 X191.73364 Y45.33902
G01 X191.72996 Y45.31900
G01 X191.73364 Y45.29901
G01 X191.72996 Y45.27902
G01 X191.73364 Y45.25903
G01 X191.72996 Y45.23902
G01 X191.73364 Y45.21903
G01 X191.72996 Y45.19901
G01 X191.73364 Y45.17902
G01 X191.72996 Y45.15901
G01 X191.73364 Y45.13902
G01 X191.72996 Y45.11900
G01 X191.73364 Y45.09901
G01 X191.72996 Y45.07903
G01 X191.73364 Y45.05904
G01 X191.72996 Y45.03902
G01 X191.73364 Y45.01903
G01 X191.72996 Y44.99902
G01 X191.73364 Y44.97903
G01 X191.72996 Y44.95901
G01 X191.73364 Y44.93902
G01 X191.72996 Y44.91900
G01 X191.73364 Y44.89902
G01 X191.72996 Y44.87900
G01 X191.73364 Y44.85901
G01 X191.72996 Y44.83902
G01 X191.73364 Y44.81903
G01 X191.72996 Y44.79902
G01 X191.73364 Y44.77903
G01 X191.72996 Y44.75901
G01 X191.73364 Y44.73902
G01 X191.72996 Y44.71901
G01 X191.73364 Y44.69902
G01 X191.72996 Y44.67900
G01 X191.73364 Y44.65901
G01 X191.72996 Y44.63902
G01 X191.73364 Y44.61903
G01 X191.72996 Y44.59902
G01 X191.73364 Y44.57903
G01 X191.72996 Y44.55901
G01 X191.73364 Y44.53902
G01 X191.72996 Y44.51901
G01 X191.73364 Y44.49902
G01 X191.72996 Y44.47900
G01 X191.73364 Y44.45901
G01 X191.72996 Y44.43902
G01 X191.73364 Y44.41903
G01 X191.72996 Y44.39902
G01 X191.73364 Y44.37903
G01 X191.72996 Y44.35901
G01 X191.73364 Y44.33902
G01 X191.72996 Y44.31901
G01 X191.73364 Y44.29902
G01 X191.72996 Y44.27900
G01 X191.73364 Y44.25901
G01 X191.72996 Y44.23902
G01 X191.73364 Y44.21903
G01 X191.72996 Y44.19902
G01 X191.73364 Y44.17903
G01 X191.72996 Y44.15901
G01 X191.73364 Y44.13902
G01 X191.72996 Y44.11901
G01 X191.73364 Y44.09902
G01 X191.72996 Y44.07900
G01 X191.73364 Y44.05901
G01 X191.72996 Y44.03902
G01 X191.73364 Y44.01903
G01 X191.72996 Y43.99902
G01 X191.73364 Y43.97903
G01 X191.72996 Y43.95901
G01 X191.73364 Y43.93902
G01 X191.72996 Y43.91901
G01 X191.73364 Y43.89902
G01 X191.72996 Y43.87900
G01 X191.73364 Y43.85901
G01 X191.72996 Y43.83902
G01 X191.73364 Y43.81903
G01 X191.72996 Y43.79902
G01 X191.73364 Y43.77903
G01 X191.72996 Y43.75901
G01 X191.73364 Y43.73902
G01 X191.72996 Y43.71901
G01 X191.73364 Y43.69902
G01 X191.72996 Y43.67900
G01 X191.73364 Y43.65901
G01 X191.72996 Y43.63902
G01 X191.73364 Y43.61903
G01 X191.72996 Y43.59902
G01 X191.73364 Y43.57903
G01 X191.72996 Y43.55901
G01 X191.73364 Y43.53902
G01 X191.72996 Y43.47900
G01 X191.73364 Y43.45904
G01 X188.96631 Y43.45904
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X199.48758 Y48.24287 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X199.48758 Y48.24287
G01 X199.48854 Y48.13561
G01 X199.53901 Y47.98108
G01 X199.55717 Y47.95174
G01 X199.66159 Y47.84872
G01 X199.76715 Y47.79484
G01 X199.97297 Y47.74155
G01 X200.15222 Y47.74155
G01 X200.34269 Y47.78918
G01 X200.45328 Y47.84247
G01 X200.47279 Y47.85654
G01 X200.56799 Y47.95177
G01 X200.58610 Y47.98108
G01 X200.63659 Y48.13561
G01 X200.63659 Y48.25491
G01 X200.57873 Y48.42517
G01 X200.52031 Y48.48638
G01 X200.49601 Y48.50264
G01 X200.46733 Y48.50836
G01 X200.45267 Y48.50693
G01 X200.42565 Y48.49573
G01 X200.40492 Y48.47503
G01 X200.39375 Y48.44800
G01 X200.39232 Y48.43335
G01 X200.39804 Y48.40467
G01 X200.41427 Y48.38034
G01 X200.44940 Y48.34521
G01 X200.48757 Y48.23071
G01 X200.48757 Y48.15982
G01 X200.44940 Y48.04529
G01 X200.37531 Y47.97120
G01 X200.29832 Y47.93269
G01 X200.12478 Y47.88931
G01 X200.00040 Y47.88931
G01 X199.82687 Y47.93269
G01 X199.74986 Y47.97120
G01 X199.67574 Y48.04531
G01 X199.63756 Y48.15982
G01 X199.63756 Y48.23071
G01 X199.67574 Y48.34521
G01 X199.71084 Y48.38034
G01 X199.72710 Y48.40467
G01 X199.73281 Y48.43335
G01 X199.72710 Y48.46205
G01 X199.72019 Y48.47503
G01 X199.69949 Y48.49573
G01 X199.67246 Y48.50693
G01 X199.64318 Y48.50693
G01 X199.61612 Y48.49573
G01 X199.54640 Y48.42517
G01 X199.49139 Y48.26660
G01 X199.48758 Y48.24287
G01 X199.44013 Y49.04709
G01 X199.44785 Y49.01887
G01 X199.46581 Y48.99576
G01 X199.49121 Y48.98125
G01 X200.20556 Y48.74315
G01 X200.23352 Y48.73944
G01 X200.24752 Y48.74158
G01 X200.26090 Y48.74630
G01 X200.28379 Y48.76281
G01 X200.29895 Y48.78659
G01 X200.30292 Y48.80020
G01 X200.30426 Y49.21552
G01 X200.57721 Y49.21694
G01 X200.60424 Y49.22814
G01 X200.62491 Y49.24884
G01 X200.63614 Y49.27587
G01 X200.63614 Y49.30515
G01 X200.62491 Y49.33218
G01 X200.60424 Y49.35288
G01 X200.57721 Y49.36408
G01 X200.30426 Y49.36550
G01 X200.30284 Y49.44800
G01 X200.29164 Y49.47503
G01 X200.27091 Y49.49573
G01 X200.25796 Y49.50264
G01 X200.22928 Y49.50835
G01 X200.21460 Y49.50693
G01 X200.18760 Y49.49573
G01 X200.16690 Y49.47503
G01 X200.15999 Y49.46205
G01 X200.15425 Y49.43335
G01 X200.15425 Y49.36550
G01 X199.88128 Y49.36408
G01 X199.85425 Y49.35288
G01 X199.84290 Y49.34353
G01 X199.83352 Y49.33218
G01 X199.82235 Y49.30515
G01 X199.82235 Y49.27587
G01 X199.83352 Y49.24884
G01 X199.85425 Y49.22814
G01 X199.88128 Y49.21694
G01 X200.15425 Y49.21552
G01 X200.15425 Y48.91836
G01 X199.52430 Y49.12682
G01 X199.50960 Y49.12723
G01 X199.48138 Y49.11950
G01 X199.45829 Y49.10155
G01 X199.44376 Y49.07612
G01 X199.44013 Y49.04709
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X194.27491 Y56.97448 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X194.27491 Y56.97448
G01 X194.27951 Y56.95154
G01 X194.29251 Y56.93206
G01 X194.31199 Y56.91906
G01 X194.33496 Y56.91449
G01 X195.12495 Y56.91449
G01 X195.12495 Y56.12447
G01 X195.12949 Y56.10153
G01 X195.14252 Y56.08205
G01 X195.16201 Y56.06905
G01 X195.18497 Y56.06447
G01 X195.20790 Y56.06905
G01 X195.22739 Y56.08205
G01 X195.24036 Y56.10153
G01 X195.24496 Y56.12447
G01 X195.24496 Y56.91449
G01 X196.03495 Y56.91449
G01 X196.05786 Y56.91906
G01 X196.07735 Y56.93206
G01 X196.09038 Y56.95154
G01 X196.09495 Y56.97448
G01 X196.09038 Y56.99744
G01 X196.07735 Y57.01692
G01 X196.05786 Y57.02993
G01 X196.03495 Y57.03450
G01 X195.24496 Y57.03450
G01 X195.24496 Y57.82449
G01 X195.24036 Y57.84745
G01 X195.22739 Y57.86693
G01 X195.20790 Y57.87994
G01 X195.18497 Y57.88451
G01 X195.16201 Y57.87994
G01 X195.14252 Y57.86693
G01 X195.12949 Y57.84745
G01 X195.12495 Y57.82449
G01 X195.12495 Y57.03450
G01 X194.33496 Y57.03450
G01 X194.31199 Y57.02993
G01 X194.29251 Y57.01692
G01 X194.27951 Y56.99744
G01 X194.27491 Y56.97448
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X181.79617 Y48.66004 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X181.79617 Y48.66004
G01 X198.90376 Y48.66004
G01 X198.74518 Y50.26992
G01 X198.25814 Y51.87568
G01 X197.46711 Y53.35554
G01 X196.40254 Y54.65264
G01 X195.10544 Y55.71715
G01 X193.62561 Y56.50819
G01 X192.01985 Y56.99526
G01 X190.34998 Y57.15975
G01 X188.68008 Y56.99526
G01 X187.07432 Y56.50819
G01 X185.59446 Y55.71715
G01 X184.29736 Y54.65264
G01 X183.23285 Y53.35554
G01 X182.44181 Y51.87568
G01 X181.95474 Y50.26992
G01 X181.79617 Y48.66004
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X181.67026 Y48.59416 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X181.67026 Y48.59416
G01 X181.83818 Y46.90094
G01 X182.05025 Y46.20178
G01 X182.05114 Y46.18733
G01 X182.06226 Y46.16216
G01 X182.06312 Y46.14732
G01 X182.07433 Y46.12246
G01 X182.07514 Y46.10732
G01 X182.08634 Y46.08283
G01 X182.08713 Y46.06734
G01 X182.09835 Y46.04293
G01 X182.10255 Y46.01608
G01 X182.11070 Y46.00252
G01 X182.11555 Y45.97608
G01 X182.12233 Y45.96419
G01 X182.33320 Y45.27303
G01 X182.61288 Y44.74974
G01 X182.61654 Y44.73607
G01 X182.63257 Y44.71293
G01 X182.63653 Y44.69607
G01 X182.65246 Y44.67420
G01 X182.66208 Y44.64568
G01 X182.67356 Y44.63331
G01 X182.68309 Y44.60570
G01 X182.69452 Y44.59335
G01 X182.70407 Y44.56569
G01 X182.71552 Y44.55332
G01 X182.72507 Y44.52569
G01 X182.73653 Y44.51332
G01 X182.74608 Y44.48568
G01 X182.75863 Y44.47242
G01 X182.76254 Y44.45606
G01 X182.78062 Y44.43242
G01 X182.79007 Y44.40570
G01 X182.80262 Y44.39244
G01 X182.80653 Y44.37608
G01 X182.82462 Y44.35243
G01 X182.83407 Y44.32569
G01 X182.84669 Y44.31238
G01 X182.85708 Y44.28568
G01 X182.86681 Y44.27473
G01 X183.13633 Y43.77298
G01 X183.45809 Y43.38088
G01 X183.46508 Y43.36569
G01 X183.48641 Y43.34636
G01 X183.49507 Y43.32569
G01 X183.51755 Y43.30598
G01 X183.52609 Y43.28568
G01 X183.54852 Y43.26600
G01 X183.56454 Y43.23659
G01 X183.58075 Y43.22533
G01 X183.59655 Y43.19661
G01 X183.61273 Y43.18535
G01 X183.62855 Y43.15660
G01 X183.64473 Y43.14535
G01 X183.66056 Y43.11660
G01 X183.67793 Y43.10471
G01 X183.68608 Y43.08568
G01 X183.71092 Y43.06470
G01 X183.72654 Y43.03659
G01 X183.74392 Y43.02470
G01 X183.75954 Y42.99661
G01 X183.77811 Y42.98408
G01 X183.79355 Y42.95660
G01 X183.81329 Y42.94352
G01 X183.82855 Y42.91660
G01 X183.84829 Y42.90351
G01 X183.86355 Y42.87659
G01 X183.88232 Y42.86397
G01 X183.89855 Y42.83659
G01 X183.91344 Y42.82602
G01 X183.93356 Y42.79661
G01 X183.94438 Y42.78822
G01 X184.21666 Y42.45838
G01 X184.51836 Y42.21078
G01 X184.52855 Y42.19658
G01 X184.55916 Y42.17730
G01 X184.57254 Y42.15660
G01 X184.60330 Y42.14019
G01 X184.61755 Y42.11660
G01 X184.64829 Y42.10019
G01 X184.65507 Y42.08569
G01 X184.67163 Y42.06913
G01 X184.69431 Y42.06008
G01 X184.70107 Y42.04568
G01 X184.71763 Y42.02912
G01 X184.74031 Y42.02008
G01 X184.74707 Y42.00568
G01 X184.76363 Y41.98912
G01 X184.78839 Y41.97987
G01 X184.79507 Y41.96570
G01 X184.81163 Y41.94914
G01 X184.83640 Y41.93989
G01 X184.84308 Y41.92569
G01 X184.85964 Y41.90913
G01 X184.88440 Y41.89988
G01 X184.89108 Y41.88569
G01 X184.90765 Y41.86913
G01 X184.93444 Y41.85968
G01 X184.94107 Y41.84568
G01 X184.95763 Y41.82912
G01 X184.98445 Y41.81967
G01 X184.99108 Y41.80568
G01 X185.00764 Y41.78912
G01 X185.03551 Y41.77957
G01 X185.04209 Y41.76570
G01 X185.05865 Y41.74914
G01 X185.08750 Y41.73948
G01 X185.09408 Y41.72569
G01 X185.11064 Y41.70913
G01 X185.13950 Y41.69948
G01 X185.14607 Y41.68569
G01 X185.16264 Y41.66913
G01 X185.18997 Y41.65963
G01 X185.21664 Y41.62912
G01 X185.23787 Y41.62028
G01 X185.27064 Y41.58912
G01 X185.28354 Y41.58282
G01 X185.53269 Y41.37985
G01 X185.78976 Y41.24243
G01 X185.80363 Y41.22912
G01 X185.84950 Y41.21048
G01 X185.86863 Y41.18912
G01 X185.89027 Y41.18018
G01 X185.91346 Y41.17632
G01 X185.93563 Y41.14914
G01 X185.95727 Y41.14020
G01 X185.97965 Y41.13903
G01 X185.98608 Y41.12569
G01 X186.00264 Y41.10913
G01 X186.02428 Y41.10019
G01 X186.04864 Y41.09902
G01 X186.05506 Y41.08569
G01 X186.07163 Y41.06913
G01 X186.09327 Y41.06019
G01 X186.11966 Y41.05902
G01 X186.12608 Y41.04568
G01 X186.14264 Y41.02912
G01 X186.16428 Y41.02018
G01 X186.19164 Y41.01901
G01 X186.19807 Y41.00568
G01 X186.21463 Y40.98912
G01 X186.23627 Y40.98018
G01 X186.26566 Y40.97901
G01 X186.27955 Y40.95661
G01 X186.29903 Y40.94360
G01 X186.34165 Y40.93903
G01 X186.35555 Y40.91660
G01 X186.37503 Y40.90360
G01 X186.41864 Y40.89902
G01 X186.43253 Y40.87660
G01 X186.45202 Y40.86359
G01 X186.49865 Y40.85902
G01 X186.51254 Y40.83659
G01 X186.53203 Y40.82359
G01 X186.57965 Y40.81901
G01 X186.59354 Y40.79658
G01 X186.61303 Y40.78358
G01 X186.65671 Y40.77901
G01 X186.66548 Y40.77433
G01 X186.67754 Y40.75661
G01 X186.69702 Y40.74360
G01 X186.73152 Y40.73903
G01 X186.75595 Y40.72597
G01 X186.78303 Y40.70360
G01 X186.80635 Y40.69902
G01 X187.03383 Y40.57875
G01 X187.23850 Y40.51665
G01 X187.25803 Y40.50360
G01 X187.29662 Y40.49902
G01 X187.33642 Y40.48696
G01 X187.34455 Y40.47660
G01 X187.36403 Y40.46359
G01 X187.44096 Y40.45523
G01 X187.45354 Y40.43659
G01 X187.47302 Y40.42359
G01 X187.49598 Y40.41901
G01 X187.55466 Y40.41901
G01 X187.56855 Y40.39659
G01 X187.58803 Y40.38358
G01 X187.61099 Y40.37901
G01 X187.67597 Y40.37901
G01 X187.68955 Y40.35760
G01 X187.70904 Y40.34459
G01 X187.73200 Y40.34002
G01 X187.80164 Y40.34002
G01 X187.81554 Y40.31759
G01 X187.84627 Y40.30118
G01 X187.93566 Y40.30002
G01 X187.94955 Y40.27759
G01 X187.98028 Y40.26118
G01 X188.07866 Y40.26001
G01 X188.09255 Y40.23761
G01 X188.12329 Y40.22120
G01 X188.21635 Y40.22003
G01 X188.23378 Y40.21475
G01 X188.25463 Y40.19013
G01 X188.27627 Y40.18119
G01 X188.34823 Y40.18003
G01 X188.40804 Y40.16189
G01 X188.42064 Y40.15013
G01 X188.44228 Y40.14119
G01 X188.48010 Y40.14002
G01 X188.66243 Y40.08594
G01 X188.80670 Y40.07172
G01 X188.83027 Y40.06118
G01 X188.92554 Y40.06001
G01 X189.02836 Y40.04990
G01 X189.04663 Y40.03011
G01 X189.06827 Y40.02117
G01 X189.31764 Y40.02001
G01 X189.32407 Y40.00670
G01 X189.34063 Y39.99014
G01 X189.37398 Y39.98003
G01 X189.73761 Y39.98003
G01 X189.74693 Y39.97911
G01 X189.75308 Y39.96669
G01 X189.76964 Y39.95013
G01 X189.80299 Y39.94002
G01 X190.14378 Y39.94002
G01 X190.35584 Y39.92031
G01 X190.55612 Y39.94002
G01 X190.90867 Y39.94119
G01 X190.93032 Y39.95013
G01 X190.94688 Y39.96669
G01 X190.95302 Y39.97911
G01 X190.96229 Y39.98003
G01 X191.33768 Y39.98119
G01 X191.36841 Y39.99760
G01 X191.38231 Y40.02001
G01 X191.63166 Y40.02117
G01 X191.65330 Y40.03011
G01 X191.67156 Y40.04990
G01 X191.77436 Y40.06001
G01 X191.86966 Y40.06118
G01 X191.89323 Y40.07172
G01 X192.04903 Y40.08823
G01 X192.21980 Y40.14002
G01 X192.26890 Y40.14459
G01 X192.29193 Y40.16192
G01 X192.35167 Y40.18003
G01 X192.41200 Y40.18003
G01 X192.43493 Y40.18460
G01 X192.45442 Y40.19760
G01 X192.46618 Y40.21477
G01 X192.48353 Y40.22003
G01 X192.57667 Y40.22120
G01 X192.60740 Y40.23761
G01 X192.62129 Y40.26001
G01 X192.71967 Y40.26118
G01 X192.75040 Y40.27759
G01 X192.76430 Y40.30002
G01 X192.84200 Y40.30002
G01 X192.86491 Y40.30459
G01 X192.88441 Y40.31759
G01 X192.89831 Y40.34002
G01 X192.96798 Y40.34002
G01 X192.99092 Y40.34459
G01 X193.01037 Y40.35760
G01 X193.02399 Y40.37901
G01 X193.08899 Y40.37901
G01 X193.11190 Y40.38358
G01 X193.13138 Y40.39659
G01 X193.14530 Y40.41901
G01 X193.20400 Y40.41901
G01 X193.22693 Y40.42359
G01 X193.24641 Y40.43659
G01 X193.25899 Y40.45526
G01 X193.33587 Y40.46359
G01 X193.35538 Y40.47660
G01 X193.36348 Y40.48696
G01 X193.40331 Y40.49902
G01 X193.44192 Y40.50360
G01 X193.46145 Y40.51668
G01 X193.67697 Y40.58325
G01 X193.89358 Y40.69902
G01 X193.91687 Y40.70360
G01 X193.94397 Y40.72597
G01 X193.96841 Y40.73903
G01 X194.00290 Y40.74360
G01 X194.02241 Y40.75661
G01 X194.03450 Y40.77436
G01 X194.04321 Y40.77901
G01 X194.08687 Y40.78358
G01 X194.10636 Y40.79658
G01 X194.12028 Y40.81901
G01 X194.16790 Y40.82359
G01 X194.18738 Y40.83659
G01 X194.20130 Y40.85902
G01 X194.24791 Y40.86359
G01 X194.26742 Y40.87660
G01 X194.28131 Y40.89902
G01 X194.32490 Y40.90360
G01 X194.34441 Y40.91660
G01 X194.35830 Y40.93903
G01 X194.38964 Y40.94020
G01 X194.41128 Y40.94914
G01 X194.42787 Y40.96570
G01 X194.43430 Y40.97901
G01 X194.46366 Y40.98018
G01 X194.48530 Y40.98912
G01 X194.50183 Y41.00568
G01 X194.50829 Y41.01901
G01 X194.53564 Y41.02018
G01 X194.55728 Y41.02912
G01 X194.57382 Y41.04568
G01 X194.58027 Y41.05902
G01 X194.60666 Y41.06019
G01 X194.62830 Y41.06913
G01 X194.64484 Y41.08569
G01 X194.65129 Y41.09902
G01 X194.67565 Y41.10019
G01 X194.69729 Y41.10913
G01 X194.71387 Y41.12569
G01 X194.72030 Y41.13903
G01 X194.74268 Y41.14020
G01 X194.76432 Y41.14914
G01 X194.78649 Y41.17632
G01 X194.80966 Y41.18018
G01 X194.83130 Y41.18912
G01 X194.85042 Y41.21048
G01 X194.89630 Y41.22912
G01 X194.91022 Y41.24246
G01 X195.17702 Y41.38637
G01 X195.41639 Y41.58282
G01 X195.43836 Y41.59658
G01 X195.46198 Y41.62028
G01 X195.48332 Y41.62912
G01 X195.50996 Y41.65960
G01 X195.53732 Y41.66913
G01 X195.55388 Y41.68569
G01 X195.56043 Y41.69948
G01 X195.58931 Y41.70913
G01 X195.60587 Y41.72569
G01 X195.61245 Y41.73948
G01 X195.64128 Y41.74914
G01 X195.65786 Y41.76570
G01 X195.66444 Y41.77957
G01 X195.69228 Y41.78912
G01 X195.70887 Y41.80568
G01 X195.71550 Y41.81967
G01 X195.74232 Y41.82912
G01 X195.75888 Y41.84568
G01 X195.76551 Y41.85968
G01 X195.78187 Y41.86359
G01 X195.80135 Y41.87659
G01 X195.81552 Y41.89986
G01 X195.84029 Y41.90913
G01 X195.85687 Y41.92569
G01 X195.86355 Y41.93989
G01 X195.87790 Y41.94360
G01 X195.89739 Y41.95660
G01 X195.91156 Y41.97987
G01 X195.92591 Y41.98358
G01 X195.94537 Y41.99658
G01 X195.95962 Y42.02005
G01 X195.98232 Y42.02912
G01 X195.99889 Y42.04568
G01 X196.00564 Y42.06008
G01 X196.02832 Y42.06913
G01 X196.04488 Y42.08569
G01 X196.05167 Y42.10019
G01 X196.08235 Y42.11660
G01 X196.09662 Y42.14017
G01 X196.12738 Y42.15660
G01 X196.14077 Y42.17733
G01 X196.17140 Y42.19658
G01 X196.18161 Y42.21083
G01 X196.49157 Y42.46671
G01 X196.75535 Y42.78810
G01 X196.77386 Y42.80570
G01 X196.78644 Y42.82599
G01 X196.80882 Y42.84568
G01 X196.81755 Y42.86394
G01 X196.83640 Y42.87659
G01 X196.85166 Y42.90351
G01 X196.87138 Y42.91660
G01 X196.88664 Y42.94352
G01 X196.90640 Y42.95660
G01 X196.92185 Y42.98408
G01 X196.94041 Y42.99661
G01 X196.95603 Y43.02472
G01 X196.97338 Y43.03659
G01 X196.98900 Y43.06470
G01 X197.01387 Y43.08568
G01 X197.02200 Y43.10471
G01 X197.04684 Y43.12569
G01 X197.05522 Y43.14535
G01 X197.07137 Y43.15660
G01 X197.08722 Y43.18535
G01 X197.10338 Y43.19661
G01 X197.11918 Y43.22533
G01 X197.13541 Y43.23659
G01 X197.15144 Y43.26600
G01 X197.17386 Y43.28568
G01 X197.18240 Y43.30598
G01 X197.20485 Y43.32569
G01 X197.21356 Y43.34644
G01 X197.23487 Y43.36569
G01 X197.24186 Y43.38096
G01 X197.57013 Y43.78274
G01 X197.83310 Y44.27471
G01 X197.84841 Y44.29607
G01 X197.85319 Y44.31235
G01 X197.86584 Y44.32569
G01 X197.87531 Y44.35241
G01 X197.88788 Y44.36569
G01 X197.89731 Y44.39244
G01 X197.90985 Y44.40570
G01 X197.91933 Y44.43242
G01 X197.93185 Y44.44568
G01 X197.94132 Y44.47242
G01 X197.95941 Y44.49607
G01 X197.96342 Y44.51332
G01 X197.97488 Y44.52569
G01 X197.98443 Y44.55332
G01 X198.00142 Y44.57608
G01 X198.00541 Y44.59335
G01 X198.02240 Y44.61608
G01 X198.02639 Y44.63331
G01 X198.04341 Y44.65606
G01 X198.04750 Y44.67420
G01 X198.06342 Y44.69607
G01 X198.06739 Y44.71299
G01 X198.08341 Y44.73607
G01 X198.08704 Y44.74979
G01 X198.37125 Y45.28388
G01 X198.57754 Y45.96414
G01 X198.58778 Y45.98733
G01 X198.58918 Y46.00244
G01 X198.60081 Y46.02733
G01 X198.60160 Y46.04295
G01 X198.61280 Y46.06734
G01 X198.61359 Y46.08283
G01 X198.62479 Y46.10732
G01 X198.62560 Y46.12251
G01 X198.63680 Y46.14732
G01 X198.63764 Y46.16218
G01 X198.64879 Y46.18733
G01 X198.64968 Y46.20178
G01 X198.86403 Y46.91247
G01 X199.02969 Y48.60592
G01 X198.86174 Y50.29911
G01 X198.36675 Y51.92704
G01 X197.56360 Y53.42709
G01 X196.48326 Y54.74167
G01 X195.16724 Y55.82020
G01 X193.66607 Y56.62129
G01 X192.03753 Y57.11410
G01 X190.34408 Y57.27974
G01 X188.65089 Y57.11182
G01 X187.02296 Y56.61680
G01 X185.52291 Y55.81367
G01 X184.20833 Y54.73334
G01 X183.12980 Y53.41731
G01 X182.32871 Y51.91617
G01 X181.83590 Y50.28757
G01 X181.67026 Y48.59416
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X156.93998 Y69.67867 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X156.93998 Y69.67867
G01 X156.93998 Y111.69865
G01 X176.15996 Y111.69865
G01 X176.15996 Y69.67867
G01 X156.93998 Y69.67867
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X156.81997 Y69.61865 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X156.81997 Y69.61865
G01 X156.81997 Y111.75865
G01 X156.82454 Y111.78161
G01 X156.84664 Y111.80856
G01 X156.87999 Y111.81867
G01 X176.21998 Y111.81867
G01 X176.24292 Y111.81410
G01 X176.26987 Y111.79200
G01 X176.27998 Y111.75865
G01 X176.27998 Y69.61865
G01 X176.27540 Y69.59571
G01 X176.25331 Y69.56877
G01 X176.21998 Y69.55866
G01 X156.87999 Y69.55866
G01 X156.85703 Y69.56323
G01 X156.83008 Y69.58533
G01 X156.81997 Y69.61865
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X141.72249 Y80.54865 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X141.72249 Y80.54865
G01 X144.73346 Y80.54865
G01 X144.73346 Y90.66865
G01 X141.72249 Y90.66865
G01 X141.72249 Y80.54865
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X140.21248 Y80.54865 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X140.21248 Y80.54865
G01 X140.21248 Y83.69866
G01 X141.60247 Y83.69866
G01 X141.60247 Y80.54865
G01 X140.21248 Y80.54865
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X140.09247 Y80.48863 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X140.09247 Y80.48863
G01 X140.09247 Y90.72864
G01 X140.10258 Y90.76202
G01 X140.12953 Y90.78412
G01 X140.15249 Y90.78866
G01 X144.79348 Y90.78866
G01 X144.82680 Y90.77855
G01 X144.84890 Y90.75160
G01 X144.85347 Y90.72864
G01 X144.85347 Y80.48863
G01 X144.84336 Y80.45531
G01 X144.81641 Y80.43321
G01 X144.79348 Y80.42864
G01 X140.15249 Y80.42864
G01 X140.11914 Y80.43875
G01 X140.09704 Y80.46570
G01 X140.09247 Y80.48863
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X140.21248 Y83.81867 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X140.21248 Y83.81867
G01 X141.60247 Y83.81867
G01 X141.60247 Y87.39967
G01 X140.21248 Y87.39967
G01 X140.21248 Y83.81867
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X138.69008 Y85.05494 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X138.69008 Y85.05494
G01 X138.69008 Y85.20998
G01 X138.72435 Y85.27851
G01 X138.79628 Y85.35045
G01 X138.95765 Y85.39081
G01 X139.27253 Y85.39081
G01 X139.43390 Y85.35045
G01 X139.46141 Y85.32294
G01 X139.36377 Y85.22393
G01 X139.30400 Y85.10208
G01 X139.30342 Y84.97496
G01 X139.31462 Y84.94793
G01 X139.33532 Y84.92723
G01 X139.34830 Y84.92032
G01 X139.37700 Y84.91461
G01 X139.39163 Y84.91603
G01 X139.41866 Y84.92723
G01 X139.43936 Y84.94793
G01 X139.45056 Y84.97496
G01 X139.45198 Y85.06713
G01 X139.48625 Y85.13564
G01 X139.54010 Y85.18949
G01 X139.54010 Y85.05494
G01 X139.50583 Y84.98644
G01 X139.43390 Y84.91448
G01 X139.27253 Y84.87412
G01 X138.95765 Y84.87412
G01 X138.79628 Y84.91448
G01 X138.72435 Y84.98644
G01 X138.69008 Y85.05494
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X138.54210 Y85.01999 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X138.54210 Y85.01999
G01 X138.60187 Y84.89815
G01 X138.70489 Y84.79373
G01 X138.72702 Y84.77844
G01 X138.93022 Y84.72637
G01 X139.28178 Y84.72413
G01 X139.50316 Y84.77844
G01 X139.52529 Y84.79373
G01 X139.62831 Y84.89815
G01 X139.68808 Y85.01999
G01 X139.69008 Y85.22769
G01 X139.68218 Y85.26124
G01 X139.65871 Y85.30813
G01 X139.72356 Y85.37432
G01 X139.77743 Y85.47988
G01 X139.78515 Y85.50810
G01 X139.78475 Y85.52281
G01 X139.77550 Y85.55057
G01 X139.75633 Y85.57267
G01 X139.73014 Y85.58575
G01 X139.70095 Y85.58783
G01 X139.67319 Y85.57859
G01 X139.65109 Y85.55941
G01 X139.60108 Y85.46261
G01 X139.56748 Y85.42901
G01 X139.52526 Y85.47120
G01 X139.50316 Y85.48649
G01 X139.28178 Y85.54079
G01 X138.94843 Y85.54079
G01 X138.72702 Y85.48649
G01 X138.70492 Y85.47120
G01 X138.60187 Y85.36680
G01 X138.54210 Y85.24493
G01 X138.54210 Y85.01999
G01 X138.54152 Y86.14707
G01 X138.54155 Y86.11781
G01 X138.54581 Y86.10373
G01 X138.56209 Y86.07940
G01 X138.71015 Y85.97894
G01 X138.79156 Y85.89756
G01 X138.84157 Y85.80076
G01 X138.86367 Y85.78159
G01 X138.87710 Y85.77559
G01 X138.90614 Y85.77193
G01 X138.93436 Y85.77965
G01 X138.94680 Y85.78750
G01 X138.96598 Y85.80960
G01 X138.97522 Y85.83736
G01 X138.97563 Y85.85207
G01 X138.96791 Y85.88029
G01 X138.91404 Y85.98585
G01 X138.84375 Y86.05748
G01 X139.54010 Y86.05748
G01 X139.54152 Y85.83211
G01 X139.55272 Y85.80508
G01 X139.57342 Y85.78438
G01 X139.58640 Y85.77747
G01 X139.61510 Y85.77176
G01 X139.62973 Y85.77318
G01 X139.65676 Y85.78438
G01 X139.66811 Y85.79373
G01 X139.67746 Y85.80508
G01 X139.68866 Y85.83211
G01 X139.68866 Y86.43282
G01 X139.67746 Y86.45984
G01 X139.65676 Y86.48054
G01 X139.62973 Y86.49174
G01 X139.60045 Y86.49174
G01 X139.57342 Y86.48054
G01 X139.55272 Y86.45984
G01 X139.54581 Y86.44686
G01 X139.54010 Y86.41816
G01 X139.54010 Y86.20747
G01 X138.61510 Y86.20747
G01 X138.58638 Y86.20175
G01 X138.56204 Y86.18550
G01 X138.54579 Y86.16114
G01 X138.54152 Y86.14707
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X112.19999 Y77.38066 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X112.19999 Y77.38066
G01 X112.19999 Y80.81665
G01 X122.74798 Y80.81665
G01 X122.74798 Y77.38066
G01 X112.19999 Y77.38066
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X112.07998 Y77.32064 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X112.07998 Y77.32064
G01 X112.07998 Y80.87664
G01 X112.09009 Y80.90999
G01 X112.11704 Y80.93209
G01 X112.14000 Y80.93666
G01 X122.80800 Y80.93666
G01 X122.84132 Y80.92655
G01 X122.86342 Y80.89960
G01 X122.86799 Y80.87664
G01 X122.86799 Y77.32064
G01 X122.85788 Y77.28732
G01 X122.83093 Y77.26522
G01 X122.80800 Y77.26065
G01 X112.14000 Y77.26065
G01 X112.10665 Y77.27076
G01 X112.08455 Y77.29771
G01 X112.07998 Y77.32064
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X110.88760 Y65.02674 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X110.88760 Y65.02674
G01 X110.88902 Y65.04139
G01 X110.90022 Y65.06842
G01 X110.92092 Y65.08912
G01 X110.93390 Y65.09603
G01 X110.96261 Y65.10174
G01 X111.35295 Y65.10174
G01 X110.90957 Y65.54515
G01 X110.89332 Y65.56948
G01 X110.88760 Y65.59816
G01 X110.88902 Y65.61282
G01 X110.90022 Y65.63984
G01 X110.92092 Y65.66054
G01 X110.94795 Y65.67174
G01 X110.97724 Y65.67174
G01 X111.00426 Y65.66054
G01 X111.39822 Y65.26862
G01 X111.93017 Y65.66580
G01 X111.95851 Y65.67307
G01 X111.97320 Y65.67243
G01 X112.00081 Y65.66270
G01 X112.01267 Y65.65402
G01 X112.03022 Y65.63060
G01 X112.03748 Y65.60225
G01 X112.03334 Y65.57329
G01 X112.01843 Y65.54810
G01 X111.50535 Y65.16148
G01 X111.56509 Y65.10174
G01 X111.96260 Y65.10174
G01 X111.99128 Y65.09603
G01 X112.00426 Y65.08912
G01 X112.02496 Y65.06842
G01 X112.03616 Y65.04139
G01 X112.03616 Y65.01211
G01 X112.02496 Y64.98508
G01 X112.00426 Y64.96438
G01 X111.97723 Y64.95318
G01 X111.96260 Y64.95176
G01 X110.96261 Y64.95176
G01 X110.94795 Y64.95318
G01 X110.92092 Y64.96438
G01 X110.90022 Y64.98508
G01 X110.88902 Y65.01211
G01 X110.88760 Y65.02674
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X107.98999 Y62.20866 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X107.98999 Y62.20866
G01 X110.80998 Y62.20866
G01 X110.80998 Y62.86865
G01 X107.98999 Y62.86865
G01 X107.98999 Y62.20866
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X104.01398 Y63.72463 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X104.01398 Y63.72463
G01 X104.01855 Y63.70170
G01 X104.03156 Y63.68221
G01 X104.06229 Y63.66581
G01 X104.26397 Y63.66464
G01 X104.26513 Y63.46296
G01 X104.28154 Y63.43223
G01 X104.30102 Y63.41922
G01 X104.32399 Y63.41465
G01 X104.34692 Y63.41922
G01 X104.36640 Y63.43223
G01 X104.38281 Y63.46296
G01 X104.38398 Y63.66464
G01 X104.58568 Y63.66581
G01 X104.61642 Y63.68221
G01 X104.62942 Y63.70170
G01 X104.63399 Y63.72463
G01 X104.62942 Y63.74759
G01 X104.61642 Y63.76708
G01 X104.58568 Y63.78348
G01 X104.38398 Y63.78465
G01 X104.38281 Y63.98635
G01 X104.36640 Y64.01709
G01 X104.34692 Y64.03009
G01 X104.32399 Y64.03466
G01 X104.30102 Y64.03009
G01 X104.28154 Y64.01709
G01 X104.26513 Y63.98635
G01 X104.26397 Y63.78465
G01 X104.06229 Y63.78348
G01 X104.03156 Y63.76708
G01 X104.01855 Y63.74759
G01 X104.01398 Y63.72463
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X104.91761 Y60.35532 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X104.91761 Y60.35532
G01 X104.91761 Y61.02197
G01 X104.92338 Y61.05085
G01 X104.93983 Y61.07528
G01 X104.96442 Y61.09149
G01 X104.99333 Y61.09698
G01 X105.02216 Y61.09093
G01 X106.02215 Y60.66236
G01 X106.04628 Y60.64580
G01 X106.06224 Y60.62126
G01 X106.06759 Y60.59248
G01 X106.06155 Y60.56386
G01 X106.04499 Y60.53973
G01 X106.02045 Y60.52377
G01 X105.99167 Y60.51842
G01 X105.96305 Y60.52446
G01 X105.06760 Y60.90825
G01 X105.06617 Y60.34069
G01 X105.05497 Y60.31367
G01 X105.03427 Y60.29296
G01 X105.00725 Y60.28176
G01 X104.99262 Y60.28034
G01 X104.96391 Y60.28606
G01 X104.95093 Y60.29296
G01 X104.93023 Y60.31367
G01 X104.91903 Y60.34069
G01 X104.91761 Y60.35532
G01 X104.91857 Y59.72428
G01 X104.96904 Y59.56970
G01 X104.98718 Y59.54036
G01 X105.09160 Y59.43734
G01 X105.19714 Y59.38349
G01 X105.40298 Y59.33018
G01 X105.58223 Y59.33018
G01 X105.77270 Y59.37780
G01 X105.88327 Y59.43112
G01 X105.90275 Y59.44514
G01 X105.99800 Y59.54036
G01 X106.01613 Y59.56970
G01 X106.06663 Y59.72428
G01 X106.06663 Y59.84354
G01 X106.00877 Y60.01379
G01 X105.95037 Y60.07501
G01 X105.92604 Y60.09126
G01 X105.89736 Y60.09698
G01 X105.88271 Y60.09556
G01 X105.85568 Y60.08435
G01 X105.83498 Y60.06365
G01 X105.82378 Y60.03663
G01 X105.82236 Y60.02197
G01 X105.82807 Y59.99330
G01 X105.84433 Y59.96896
G01 X105.87943 Y59.93383
G01 X105.91761 Y59.81933
G01 X105.91761 Y59.74846
G01 X105.87943 Y59.63394
G01 X105.80529 Y59.55982
G01 X105.72833 Y59.52131
G01 X105.55479 Y59.47793
G01 X105.43041 Y59.47793
G01 X105.25685 Y59.52131
G01 X105.17989 Y59.55982
G01 X105.10575 Y59.63394
G01 X105.06760 Y59.74844
G01 X105.06760 Y59.81933
G01 X105.10575 Y59.93386
G01 X105.14085 Y59.96896
G01 X105.15711 Y59.99330
G01 X105.16282 Y60.02197
G01 X105.15711 Y60.05067
G01 X105.15020 Y60.06365
G01 X105.12950 Y60.08435
G01 X105.10247 Y60.09556
G01 X105.07318 Y60.09556
G01 X105.04616 Y60.08435
G01 X104.97641 Y60.01379
G01 X104.92144 Y59.85522
G01 X104.91761 Y59.83150
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X104.01398 Y56.10463 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X104.01398 Y56.10463
G01 X104.01855 Y56.12759
G01 X104.03156 Y56.14707
G01 X104.06229 Y56.16348
G01 X104.26397 Y56.16465
G01 X104.26513 Y56.36635
G01 X104.28154 Y56.39709
G01 X104.30102 Y56.41009
G01 X104.32399 Y56.41466
G01 X104.34692 Y56.41009
G01 X104.36640 Y56.39709
G01 X104.38281 Y56.36635
G01 X104.38398 Y56.16465
G01 X104.58568 Y56.16348
G01 X104.61642 Y56.14707
G01 X104.62942 Y56.12759
G01 X104.63399 Y56.10463
G01 X104.62942 Y56.08170
G01 X104.61642 Y56.06221
G01 X104.58568 Y56.04581
G01 X104.38398 Y56.04464
G01 X104.38281 Y55.84296
G01 X104.36640 Y55.81223
G01 X104.34692 Y55.79922
G01 X104.32399 Y55.79465
G01 X104.30102 Y55.79922
G01 X104.28154 Y55.81223
G01 X104.26513 Y55.84296
G01 X104.26397 Y56.04464
G01 X104.06229 Y56.04581
G01 X104.03156 Y56.06221
G01 X104.01855 Y56.08170
G01 X104.01398 Y56.10463
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X100.79615 Y59.48814 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X100.79615 Y59.48814
G01 X100.79999 Y59.50864
G01 X100.79631 Y59.56866
G01 X100.79999 Y59.58865
G01 X100.79631 Y59.60866
G01 X100.79999 Y59.66863
G01 X100.79631 Y59.68865
G01 X100.79999 Y59.70864
G01 X100.79631 Y59.72865
G01 X100.79999 Y59.74864
G01 X100.79631 Y59.76866
G01 X100.79999 Y59.78865
G01 X100.79631 Y59.80866
G01 X100.79999 Y59.82865
G01 X100.79631 Y59.88865
G01 X100.79999 Y59.90864
G01 X100.79631 Y59.92865
G01 X102.76364 Y59.92865
G01 X102.75996 Y59.90864
G01 X102.76364 Y59.88865
G01 X102.75996 Y59.86863
G01 X102.76364 Y59.84864
G01 X102.75996 Y59.82865
G01 X102.76364 Y59.76866
G01 X102.75996 Y59.74864
G01 X102.76364 Y59.72865
G01 X102.75996 Y59.70864
G01 X102.76364 Y59.68865
G01 X102.75996 Y59.62865
G01 X102.76364 Y59.60866
G01 X102.75996 Y59.58865
G01 X102.76364 Y59.52865
G01 X102.75996 Y59.50864
G01 X102.76379 Y59.48814
G01 X102.75996 Y59.46764
G01 X102.76364 Y59.44765
G01 X102.75996 Y59.42764
G01 X102.76364 Y59.40765
G01 X102.75996 Y59.38763
G01 X102.76364 Y59.36764
G01 X102.75996 Y59.34765
G01 X102.76364 Y59.32766
G01 X102.75996 Y59.30765
G01 X102.76364 Y59.28766
G01 X102.75996 Y59.26764
G01 X102.76364 Y59.24765
G01 X102.75996 Y59.22764
G01 X102.76364 Y59.20765
G01 X102.75996 Y59.18763
G01 X102.76364 Y59.16764
G01 X102.75996 Y59.14765
G01 X102.76364 Y59.12766
G01 X102.75996 Y59.10765
G01 X102.76364 Y59.08766
G01 X102.75996 Y59.06764
G01 X102.76364 Y59.04765
G01 X102.75996 Y59.02764
G01 X102.76364 Y59.00765
G01 X102.75996 Y58.98763
G01 X102.76364 Y58.96764
G01 X102.75996 Y58.94765
G01 X102.76364 Y58.92766
G01 X102.75996 Y58.90765
G01 X102.76364 Y58.88766
G01 X102.75996 Y58.86764
G01 X102.76364 Y58.84765
G01 X102.75996 Y58.82764
G01 X102.76364 Y58.80765
G01 X102.75996 Y58.78763
G01 X102.76364 Y58.76764
G01 X102.75996 Y58.74765
G01 X102.76364 Y58.72766
G01 X102.75996 Y58.70765
G01 X102.76364 Y58.68766
G01 X102.75996 Y58.66764
G01 X102.76364 Y58.64765
G01 X102.75996 Y58.62764
G01 X102.76364 Y58.60765
G01 X102.75996 Y58.58763
G01 X102.76364 Y58.56764
G01 X102.75996 Y58.54765
G01 X102.76364 Y58.52766
G01 X102.75996 Y58.50765
G01 X102.76364 Y58.48766
G01 X102.75996 Y58.46764
G01 X102.76364 Y58.44765
G01 X102.75996 Y58.42764
G01 X102.76364 Y58.40765
G01 X102.75996 Y58.38763
G01 X102.76364 Y58.36764
G01 X102.75996 Y58.34765
G01 X102.76364 Y58.32767
G01 X102.75996 Y58.30765
G01 X102.76364 Y58.28766
G01 X102.75996 Y58.26764
G01 X102.76364 Y58.24765
G01 X102.75996 Y58.22764
G01 X102.76364 Y58.20765
G01 X102.75996 Y58.18763
G01 X102.76364 Y58.16765
G01 X102.75996 Y58.14766
G01 X102.76364 Y58.12767
G01 X102.75996 Y58.10765
G01 X102.76364 Y58.08766
G01 X102.75996 Y58.06765
G01 X102.76364 Y58.04766
G01 X102.75996 Y58.02764
G01 X102.76364 Y58.00765
G01 X102.76077 Y57.97938
G01 X102.69801 Y57.94623
G01 X102.63608 Y57.92767
G01 X100.92384 Y57.92767
G01 X100.86194 Y57.94623
G01 X100.79918 Y57.97935
G01 X100.79631 Y58.00765
G01 X100.79999 Y58.02764
G01 X100.79631 Y58.04766
G01 X100.79999 Y58.06765
G01 X100.79631 Y58.08766
G01 X100.79999 Y58.10765
G01 X100.79631 Y58.12767
G01 X100.79999 Y58.14766
G01 X100.79631 Y58.16765
G01 X100.79999 Y58.18763
G01 X100.79631 Y58.20765
G01 X100.79999 Y58.22764
G01 X100.79631 Y58.24765
G01 X100.79999 Y58.26764
G01 X100.79631 Y58.28766
G01 X100.79999 Y58.30765
G01 X100.79631 Y58.32767
G01 X100.79999 Y58.34765
G01 X100.79631 Y58.36764
G01 X100.79999 Y58.38763
G01 X100.79631 Y58.40765
G01 X100.79999 Y58.42764
G01 X100.79631 Y58.44765
G01 X100.79999 Y58.46764
G01 X100.79631 Y58.48766
G01 X100.79999 Y58.50765
G01 X100.79631 Y58.52766
G01 X100.79999 Y58.54765
G01 X100.79631 Y58.56764
G01 X100.79999 Y58.58763
G01 X100.79631 Y58.60765
G01 X100.79999 Y58.62764
G01 X100.79631 Y58.64765
G01 X100.79999 Y58.66764
G01 X100.79631 Y58.68766
G01 X100.79999 Y58.70765
G01 X100.79631 Y58.72766
G01 X100.79999 Y58.74765
G01 X100.79631 Y58.76767
G01 X100.79999 Y58.78763
G01 X100.79631 Y58.80765
G01 X100.79999 Y58.82764
G01 X100.79631 Y58.84765
G01 X100.79999 Y58.86764
G01 X100.79631 Y58.88766
G01 X100.79999 Y58.90765
G01 X100.79631 Y58.92766
G01 X100.79999 Y58.94765
G01 X100.79631 Y58.96764
G01 X100.79999 Y58.98763
G01 X100.79631 Y59.00765
G01 X100.79999 Y59.02764
G01 X100.79631 Y59.04765
G01 X100.79999 Y59.06764
G01 X100.79631 Y59.08766
G01 X100.79999 Y59.10765
G01 X100.79631 Y59.12766
G01 X100.79999 Y59.14765
G01 X100.79631 Y59.16764
G01 X100.79999 Y59.18763
G01 X100.79631 Y59.20765
G01 X100.79999 Y59.22764
G01 X100.79631 Y59.24765
G01 X100.79999 Y59.26764
G01 X100.79631 Y59.28766
G01 X100.79999 Y59.30765
G01 X100.79631 Y59.32766
G01 X100.79999 Y59.34765
G01 X100.79631 Y59.36764
G01 X100.79999 Y59.38763
G01 X100.79631 Y59.40765
G01 X100.79999 Y59.42764
G01 X100.79631 Y59.44765
G01 X100.79999 Y59.46764
G01 X100.79615 Y59.48814
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X99.36532 Y60.24867 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X99.36532 Y60.24867
G01 X104.19462 Y60.24867
G01 X104.16483 Y60.61730
G01 X104.03719 Y61.06970
G01 X103.82462 Y61.48892
G01 X103.53509 Y61.85920
G01 X103.17954 Y62.16665
G01 X102.76625 Y62.40254
G01 X102.75602 Y62.40990
G01 X102.74121 Y62.43012
G01 X102.73598 Y62.45463
G01 X102.73598 Y63.41064
G01 X100.82399 Y63.41064
G01 X100.82399 Y62.45463
G01 X100.81876 Y62.43012
G01 X100.81241 Y62.41922
G01 X100.79372 Y62.40254
G01 X100.38041 Y62.16665
G01 X100.02486 Y61.85920
G01 X99.73532 Y61.48892
G01 X99.52275 Y61.06970
G01 X99.39512 Y60.61730
G01 X99.36532 Y60.24867
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X99.13997 Y60.14864 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X99.13997 Y60.14864
G01 X99.14414 Y60.12703
G01 X99.14096 Y60.10864
G01 X99.14515 Y60.08697
G01 X99.14198 Y60.06863
G01 X99.14668 Y60.04547
G01 X99.14396 Y60.02865
G01 X99.15295 Y59.96304
G01 X99.15097 Y59.94864
G01 X99.15694 Y59.92306
G01 X99.15496 Y59.90864
G01 X99.16095 Y59.88303
G01 X99.16014 Y59.85695
G01 X99.16560 Y59.84186
G01 X99.16514 Y59.81697
G01 X99.17124 Y59.80069
G01 X99.17114 Y59.77696
G01 X99.17800 Y59.75923
G01 X99.17812 Y59.73696
G01 X99.18501 Y59.71918
G01 X99.18513 Y59.69695
G01 X99.20086 Y59.63762
G01 X99.20114 Y59.61697
G01 X99.20970 Y59.59606
G01 X99.21013 Y59.57696
G01 X99.22958 Y59.51471
G01 X99.23014 Y59.49695
G01 X99.24056 Y59.47354
G01 X99.24114 Y59.45596
G01 X99.25234 Y59.43157
G01 X99.25653 Y59.40470
G01 X99.26525 Y59.39045
G01 X99.26954 Y59.36470
G01 X99.27825 Y59.35045
G01 X99.28254 Y59.32472
G01 X99.29214 Y59.30940
G01 X99.29654 Y59.28471
G01 X99.30614 Y59.26940
G01 X99.31053 Y59.24471
G01 X99.32204 Y59.22708
G01 X99.32654 Y59.20470
G01 X99.33804 Y59.18707
G01 X99.34254 Y59.16470
G01 X99.35516 Y59.14570
G01 X99.35953 Y59.12472
G01 X99.37218 Y59.10567
G01 X99.37655 Y59.08471
G01 X99.39136 Y59.06376
G01 X99.40108 Y59.03432
G01 X99.41036 Y59.02375
G01 X99.41455 Y59.00470
G01 X99.43045 Y58.98286
G01 X99.44007 Y58.95431
G01 X99.45262 Y58.94105
G01 X99.46207 Y58.91433
G01 X99.47353 Y58.90196
G01 X99.48308 Y58.87432
G01 X99.49672 Y58.86018
G01 X99.50609 Y58.83432
G01 X99.52080 Y58.81931
G01 X99.53007 Y58.79431
G01 X99.54589 Y58.77836
G01 X99.55514 Y58.75423
G01 X99.57195 Y58.73757
G01 X99.58107 Y58.71433
G01 X99.59900 Y58.69703
G01 X99.60807 Y58.67432
G01 X99.62600 Y58.65703
G01 X99.63507 Y58.63432
G01 X99.65633 Y58.61527
G01 X99.66507 Y58.59431
G01 X99.68633 Y58.57526
G01 X99.69506 Y58.55431
G01 X99.71754 Y58.53460
G01 X99.73355 Y58.50524
G01 X99.75092 Y58.49335
G01 X99.76654 Y58.46523
G01 X99.78511 Y58.45271
G01 X99.80055 Y58.42523
G01 X99.82138 Y58.41182
G01 X99.83654 Y58.38522
G01 X99.85849 Y58.37148
G01 X99.87355 Y58.34522
G01 X99.89659 Y58.33112
G01 X99.91155 Y58.30524
G01 X99.93789 Y58.29015
G01 X99.95254 Y58.26523
G01 X99.98000 Y58.24981
G01 X99.99456 Y58.22523
G01 X100.02420 Y58.20915
G01 X100.03108 Y58.19432
G01 X100.04764 Y58.17775
G01 X100.07032 Y58.16871
G01 X100.08455 Y58.14522
G01 X100.10403 Y58.13221
G01 X100.11841 Y58.12850
G01 X100.12509 Y58.11433
G01 X100.14165 Y58.09777
G01 X100.16946 Y58.08822
G01 X100.17606 Y58.07433
G01 X100.19263 Y58.05776
G01 X100.22356 Y58.04791
G01 X100.23006 Y58.03432
G01 X100.24663 Y58.01776
G01 X100.28066 Y58.00765
G01 X100.28709 Y57.99432
G01 X100.30365 Y57.97775
G01 X100.32529 Y57.96881
G01 X100.34066 Y57.96765
G01 X100.34708 Y57.95431
G01 X100.36364 Y57.93775
G01 X100.38528 Y57.92881
G01 X100.40464 Y57.92764
G01 X100.41853 Y57.90521
G01 X100.43801 Y57.89221
G01 X100.47266 Y57.88764
G01 X100.48655 Y57.86523
G01 X100.50604 Y57.85223
G01 X100.54566 Y57.84766
G01 X100.55955 Y57.82523
G01 X100.57904 Y57.81222
G01 X100.62564 Y57.80765
G01 X100.63954 Y57.78522
G01 X100.65902 Y57.77222
G01 X100.68198 Y57.76765
G01 X100.71264 Y57.76765
G01 X100.72653 Y57.74522
G01 X100.74601 Y57.73221
G01 X100.76898 Y57.72764
G01 X100.80865 Y57.72764
G01 X100.82255 Y57.70521
G01 X100.84203 Y57.69221
G01 X100.86499 Y57.68764
G01 X100.91866 Y57.68764
G01 X100.93255 Y57.66523
G01 X100.95203 Y57.65223
G01 X100.97500 Y57.64766
G01 X101.04665 Y57.64766
G01 X101.06054 Y57.62523
G01 X101.08002 Y57.61222
G01 X101.10299 Y57.60765
G01 X101.20565 Y57.60765
G01 X101.21955 Y57.58522
G01 X101.25028 Y57.56881
G01 X101.43964 Y57.56765
G01 X101.44606 Y57.55431
G01 X101.46263 Y57.53775
G01 X101.49598 Y57.52764
G01 X102.06400 Y57.52764
G01 X102.09732 Y57.53775
G01 X102.11388 Y57.55431
G01 X102.12031 Y57.56765
G01 X102.30966 Y57.56881
G01 X102.34040 Y57.58522
G01 X102.35429 Y57.60765
G01 X102.45698 Y57.60765
G01 X102.47992 Y57.61222
G01 X102.49940 Y57.62523
G01 X102.51330 Y57.64766
G01 X102.58498 Y57.64766
G01 X102.60791 Y57.65223
G01 X102.62739 Y57.66523
G01 X102.64129 Y57.68764
G01 X102.69498 Y57.68764
G01 X102.71792 Y57.69221
G01 X102.73740 Y57.70521
G01 X102.75129 Y57.72764
G01 X102.79099 Y57.72764
G01 X102.81393 Y57.73221
G01 X102.83341 Y57.74522
G01 X102.84731 Y57.76765
G01 X102.87799 Y57.76765
G01 X102.90093 Y57.77222
G01 X102.92041 Y57.78522
G01 X102.93430 Y57.80765
G01 X102.96968 Y57.80882
G01 X102.99132 Y57.81776
G01 X103.00789 Y57.83432
G01 X103.01431 Y57.84766
G01 X103.04268 Y57.84882
G01 X103.06432 Y57.85777
G01 X103.08088 Y57.87433
G01 X103.08731 Y57.88764
G01 X103.12193 Y57.89221
G01 X103.14141 Y57.90521
G01 X103.15531 Y57.92764
G01 X103.18591 Y57.93221
G01 X103.20540 Y57.94522
G01 X103.21929 Y57.96765
G01 X103.23468 Y57.96881
G01 X103.25632 Y57.97775
G01 X103.27288 Y57.99432
G01 X103.27931 Y58.00765
G01 X103.31332 Y58.01776
G01 X103.32988 Y58.03432
G01 X103.33638 Y58.04791
G01 X103.36732 Y58.05776
G01 X103.38388 Y58.07433
G01 X103.39049 Y58.08822
G01 X103.41832 Y58.09777
G01 X103.43488 Y58.11433
G01 X103.44156 Y58.12850
G01 X103.45592 Y58.13221
G01 X103.47540 Y58.14522
G01 X103.48962 Y58.16871
G01 X103.50192 Y58.17222
G01 X103.52140 Y58.18522
G01 X103.53575 Y58.20912
G01 X103.56542 Y58.22523
G01 X103.57997 Y58.24981
G01 X103.59831 Y58.25776
G01 X103.61487 Y58.27432
G01 X103.62206 Y58.29015
G01 X103.64840 Y58.30524
G01 X103.66336 Y58.33112
G01 X103.68640 Y58.34522
G01 X103.70146 Y58.37148
G01 X103.72340 Y58.38522
G01 X103.73857 Y58.41182
G01 X103.75939 Y58.42523
G01 X103.77484 Y58.45271
G01 X103.79341 Y58.46523
G01 X103.80903 Y58.49335
G01 X103.83387 Y58.51433
G01 X103.84240 Y58.53460
G01 X103.85741 Y58.54522
G01 X103.87362 Y58.57526
G01 X103.89488 Y58.59431
G01 X103.90362 Y58.61527
G01 X103.92488 Y58.63432
G01 X103.93394 Y58.65703
G01 X103.95188 Y58.67432
G01 X103.96094 Y58.69703
G01 X103.97888 Y58.71433
G01 X103.98799 Y58.73760
G01 X104.00486 Y58.75431
G01 X104.01406 Y58.77836
G01 X104.02988 Y58.79431
G01 X104.03915 Y58.81928
G01 X104.05388 Y58.83432
G01 X104.06326 Y58.86018
G01 X104.07687 Y58.87432
G01 X104.08642 Y58.90196
G01 X104.09788 Y58.91433
G01 X104.10732 Y58.94105
G01 X104.11987 Y58.95431
G01 X104.12950 Y58.98286
G01 X104.14540 Y59.00470
G01 X104.14959 Y59.02375
G01 X104.15886 Y59.03432
G01 X104.16856 Y59.06373
G01 X104.18342 Y59.08471
G01 X104.18779 Y59.10572
G01 X104.20042 Y59.12472
G01 X104.20478 Y59.14570
G01 X104.21741 Y59.16470
G01 X104.22190 Y59.18707
G01 X104.23341 Y59.20470
G01 X104.23791 Y59.22708
G01 X104.24941 Y59.24471
G01 X104.25381 Y59.26940
G01 X104.26341 Y59.28471
G01 X104.26780 Y59.30940
G01 X104.27740 Y59.32472
G01 X104.28169 Y59.35045
G01 X104.29041 Y59.36470
G01 X104.29470 Y59.39045
G01 X104.30341 Y59.40470
G01 X104.30760 Y59.43157
G01 X104.31880 Y59.45596
G01 X104.31939 Y59.47354
G01 X104.32980 Y59.49695
G01 X104.33036 Y59.51471
G01 X104.34982 Y59.57696
G01 X104.35025 Y59.59606
G01 X104.35881 Y59.61697
G01 X104.35909 Y59.63762
G01 X104.36681 Y59.65695
G01 X104.36709 Y59.67762
G01 X104.37481 Y59.69695
G01 X104.37494 Y59.71918
G01 X104.38182 Y59.73696
G01 X104.38195 Y59.75923
G01 X104.38881 Y59.77696
G01 X104.38871 Y59.80069
G01 X104.39480 Y59.81697
G01 X104.39434 Y59.84186
G01 X104.40382 Y59.89695
G01 X104.40301 Y59.92306
G01 X104.40781 Y59.93696
G01 X104.40699 Y59.96304
G01 X104.41299 Y59.98865
G01 X104.41065 Y60.00427
G01 X104.41598 Y60.02865
G01 X104.41329 Y60.04544
G01 X104.41799 Y60.06863
G01 X104.41482 Y60.08702
G01 X104.41898 Y60.10864
G01 X104.41581 Y60.12703
G01 X104.41997 Y60.14864
G01 X104.41629 Y60.16866
G01 X104.41997 Y60.18865
G01 X104.40986 Y60.22200
G01 X104.39330 Y60.23856
G01 X104.37166 Y60.24750
G01 X104.31499 Y60.24867
G01 X104.28190 Y60.64425
G01 X104.15109 Y61.10790
G01 X103.92274 Y61.55821
G01 X103.61802 Y61.94615
G01 X103.25360 Y62.26124
G01 X102.85599 Y62.48948
G01 X102.85599 Y63.47063
G01 X102.85142 Y63.49359
G01 X102.83842 Y63.51307
G01 X102.81893 Y63.52608
G01 X102.79600 Y63.53065
G01 X100.76400 Y63.53065
G01 X100.74104 Y63.52608
G01 X100.72155 Y63.51307
G01 X100.70855 Y63.49359
G01 X100.70398 Y63.47063
G01 X100.70398 Y62.48948
G01 X100.30634 Y62.26124
G01 X99.94193 Y61.94615
G01 X99.63720 Y61.55821
G01 X99.40886 Y61.10790
G01 X99.27805 Y60.64425
G01 X99.24493 Y60.24867
G01 X99.18828 Y60.24750
G01 X99.16664 Y60.23856
G01 X99.14455 Y60.21161
G01 X99.13997 Y60.18865
G01 X99.14366 Y60.16866
G01 X99.13997 Y60.14864
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X90.47306 Y65.09560 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X90.47306 Y65.09560
G01 X90.50733 Y65.02709
G01 X90.53773 Y64.99666
G01 X90.60626 Y64.96240
G01 X90.76125 Y64.96240
G01 X90.82980 Y64.99666
G01 X90.86018 Y65.02707
G01 X90.89447 Y65.09560
G01 X90.89447 Y65.29826
G01 X90.86018 Y65.36679
G01 X90.82980 Y65.39720
G01 X90.76125 Y65.43146
G01 X90.60626 Y65.43146
G01 X90.53773 Y65.39720
G01 X90.50733 Y65.36677
G01 X90.47306 Y65.29826
G01 X90.47306 Y65.09560
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X90.32307 Y65.07787 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X90.32307 Y65.07787
G01 X90.33097 Y65.04434
G01 X90.38485 Y64.93880
G01 X90.44030 Y64.88201
G01 X90.45978 Y64.86796
G01 X90.57128 Y64.81442
G01 X90.79623 Y64.81442
G01 X90.90778 Y64.86794
G01 X90.92729 Y64.88201
G01 X90.98269 Y64.93880
G01 X91.03653 Y65.04434
G01 X91.04446 Y65.07787
G01 X91.04446 Y65.31597
G01 X91.03653 Y65.34952
G01 X90.98891 Y65.44475
G01 X90.97489 Y65.46423
G01 X90.91809 Y65.51968
G01 X90.81253 Y65.57355
G01 X90.77900 Y65.58145
G01 X90.58855 Y65.58145
G01 X90.55500 Y65.57352
G01 X90.49678 Y65.54441
G01 X90.51528 Y65.61851
G01 X90.59920 Y65.74439
G01 X90.63295 Y65.77815
G01 X90.70148 Y65.81241
G01 X90.88888 Y65.81383
G01 X90.91588 Y65.82503
G01 X90.93661 Y65.84573
G01 X90.94347 Y65.85871
G01 X90.94924 Y65.88739
G01 X90.94347 Y65.91609
G01 X90.92726 Y65.94043
G01 X90.90293 Y65.95668
G01 X90.87423 Y65.96240
G01 X90.68378 Y65.96240
G01 X90.65023 Y65.95447
G01 X90.55500 Y65.90685
G01 X90.53552 Y65.89283
G01 X90.47850 Y65.83377
G01 X90.37710 Y65.67964
G01 X90.32307 Y65.45882
G01 X90.32307 Y65.07787
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X89.32308 Y65.88739 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X89.32308 Y65.88739
G01 X89.32879 Y65.91609
G01 X89.33570 Y65.92907
G01 X89.35640 Y65.94977
G01 X89.38343 Y65.96097
G01 X89.41271 Y65.96097
G01 X89.43974 Y65.94977
G01 X89.46039 Y65.92907
G01 X89.47164 Y65.90205
G01 X89.47306 Y65.09560
G01 X89.50733 Y65.02709
G01 X89.53771 Y64.99666
G01 X89.60626 Y64.96240
G01 X89.76130 Y64.96240
G01 X89.82983 Y64.99666
G01 X89.86018 Y65.02707
G01 X89.89450 Y65.09560
G01 X89.89592 Y65.90205
G01 X89.90712 Y65.92907
G01 X89.92780 Y65.94977
G01 X89.95485 Y65.96097
G01 X89.96951 Y65.96240
G01 X89.99818 Y65.95668
G01 X90.01116 Y65.94977
G01 X90.03186 Y65.92907
G01 X90.04304 Y65.90205
G01 X90.04449 Y65.88739
G01 X90.04449 Y65.07787
G01 X90.03656 Y65.04431
G01 X89.98269 Y64.93880
G01 X89.92732 Y64.88203
G01 X89.90778 Y64.86794
G01 X89.81253 Y64.82031
G01 X89.77901 Y64.81241
G01 X89.57129 Y64.81442
G01 X89.45975 Y64.86796
G01 X89.44030 Y64.88201
G01 X89.38485 Y64.93880
G01 X89.32508 Y65.06065
G01 X89.32308 Y65.88739
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X82.81359 Y61.30851 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X82.81359 Y61.30851
G01 X83.18740 Y61.30851
G01 X83.18740 Y61.59677
G01 X83.15316 Y61.66528
G01 X83.12276 Y61.69568
G01 X83.05420 Y61.72994
G01 X82.94679 Y61.72994
G01 X82.87826 Y61.69568
G01 X82.84785 Y61.66528
G01 X82.81359 Y61.59675
G01 X82.81359 Y61.30851
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X82.66502 Y60.74267 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X82.66502 Y60.74267
G01 X82.67623 Y60.71565
G01 X82.69693 Y60.69494
G01 X82.72395 Y60.68374
G01 X83.44072 Y60.68232
G01 X83.55522 Y60.64417
G01 X83.62542 Y60.57396
G01 X83.66360 Y60.45944
G01 X83.66502 Y60.36172
G01 X83.67622 Y60.33470
G01 X83.69693 Y60.31400
G01 X83.72395 Y60.30279
G01 X83.75324 Y60.30279
G01 X83.78026 Y60.31400
G01 X83.80096 Y60.33470
G01 X83.80787 Y60.34768
G01 X83.81359 Y60.37635
G01 X83.81262 Y60.48364
G01 X83.76213 Y60.63818
G01 X83.74402 Y60.66749
G01 X83.64879 Y60.76274
G01 X83.61946 Y60.78087
G01 X83.47658 Y60.82847
G01 X83.45288 Y60.83231
G01 X82.73861 Y60.83231
G01 X82.72395 Y60.83089
G01 X82.69693 Y60.81968
G01 X82.67623 Y60.79898
G01 X82.66502 Y60.77196
G01 X82.66502 Y60.74267
G01 X82.66561 Y61.63170
G01 X82.72538 Y61.75357
G01 X82.78080 Y61.81034
G01 X82.80028 Y61.82441
G01 X82.91184 Y61.87792
G01 X83.08915 Y61.87792
G01 X83.20071 Y61.82441
G01 X83.22019 Y61.81036
G01 X83.27564 Y61.75357
G01 X83.32949 Y61.64798
G01 X83.33739 Y61.61445
G01 X83.33739 Y61.30851
G01 X83.75324 Y61.30708
G01 X83.78026 Y61.29588
G01 X83.80096 Y61.27518
G01 X83.81217 Y61.24816
G01 X83.81359 Y61.23350
G01 X83.80787 Y61.20482
G01 X83.79162 Y61.18049
G01 X83.76728 Y61.16424
G01 X83.73861 Y61.15852
G01 X82.73861 Y61.15852
G01 X82.70991 Y61.16424
G01 X82.69693 Y61.17114
G01 X82.67623 Y61.19185
G01 X82.66502 Y61.21887
G01 X82.66360 Y61.23350
G01 X82.66495 Y62.77152
G01 X82.67554 Y62.79794
G01 X82.69523 Y62.81849
G01 X82.72111 Y62.83025
G01 X82.74953 Y62.83152
G01 X82.77638 Y62.82209
G01 X83.04750 Y62.58669
G01 X83.10632 Y62.70594
G01 X83.16177 Y62.76273
G01 X83.18125 Y62.77681
G01 X83.29279 Y62.83030
G01 X83.56535 Y62.83030
G01 X83.68720 Y62.77056
G01 X83.75181 Y62.70594
G01 X83.80569 Y62.60038
G01 X83.81359 Y62.56682
G01 X83.81158 Y62.26390
G01 X83.75181 Y62.14203
G01 X83.69637 Y62.08524
G01 X83.67203 Y62.06898
G01 X83.65796 Y62.06472
G01 X83.62870 Y62.06474
G01 X83.60165 Y62.07594
G01 X83.58097 Y62.09664
G01 X83.56977 Y62.12367
G01 X83.56980 Y62.15293
G01 X83.58100 Y62.17998
G01 X83.62934 Y62.23032
G01 X83.66360 Y62.29885
G01 X83.66360 Y62.54912
G01 X83.62934 Y62.61765
G01 X83.59893 Y62.64808
G01 X83.53043 Y62.68232
G01 X83.32771 Y62.68232
G01 X83.25921 Y62.64808
G01 X83.22880 Y62.61765
G01 X83.19454 Y62.54912
G01 X83.19454 Y62.42397
G01 X83.18915 Y62.39606
G01 X83.17374 Y62.37213
G01 X83.15055 Y62.35570
G01 X83.13703 Y62.35105
G01 X83.10861 Y62.34978
G01 X83.08176 Y62.35920
G01 X83.07015 Y62.36754
G01 X82.81359 Y62.59202
G01 X82.81217 Y62.12364
G01 X82.80097 Y62.09662
G01 X82.78026 Y62.07592
G01 X82.76729 Y62.06901
G01 X82.73861 Y62.06329
G01 X82.72395 Y62.06472
G01 X82.69693 Y62.07592
G01 X82.67623 Y62.09662
G01 X82.66502 Y62.12364
G01 X82.66360 Y62.13827
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X75.46199 Y56.82467 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X75.46199 Y56.82467
G01 X78.89798 Y56.82467
G01 X78.89798 Y67.37266
G01 X75.46199 Y67.37266
G01 X75.46199 Y56.82467
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X75.34198 Y56.76465 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X75.34198 Y56.76465
G01 X75.35209 Y56.73133
G01 X75.37904 Y56.70923
G01 X75.40200 Y56.70466
G01 X78.95800 Y56.70466
G01 X78.99132 Y56.71476
G01 X79.01342 Y56.74171
G01 X79.01799 Y56.76465
G01 X79.01799 Y67.43265
G01 X79.00788 Y67.46600
G01 X78.98093 Y67.48810
G01 X78.95800 Y67.49267
G01 X75.40200 Y67.49267
G01 X75.36865 Y67.48256
G01 X75.34655 Y67.45561
G01 X75.34198 Y67.43265
G01 X75.34198 Y56.76465
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X53.23760 Y68.39810 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X53.23760 Y68.39810
G01 X53.23902 Y68.41276
G01 X53.25022 Y68.43979
G01 X53.27093 Y68.46049
G01 X53.29795 Y68.47169
G01 X54.10440 Y68.47311
G01 X54.17291 Y68.50738
G01 X54.20333 Y68.53780
G01 X54.23760 Y68.60631
G01 X54.23760 Y68.76135
G01 X54.20333 Y68.82988
G01 X54.17293 Y68.86031
G01 X54.10443 Y68.89455
G01 X53.29795 Y68.89597
G01 X53.27093 Y68.90717
G01 X53.25022 Y68.92787
G01 X53.23902 Y68.95490
G01 X53.23760 Y68.96953
G01 X53.24332 Y68.99823
G01 X53.25022 Y69.01121
G01 X53.27093 Y69.03191
G01 X53.29795 Y69.04311
G01 X53.31261 Y69.04453
G01 X54.12213 Y69.04453
G01 X54.15566 Y69.03664
G01 X54.25088 Y68.98904
G01 X54.27036 Y68.97496
G01 X54.32581 Y68.91817
G01 X54.37969 Y68.81261
G01 X54.38759 Y68.77905
G01 X54.38558 Y68.57136
G01 X54.33204 Y68.45983
G01 X54.31799 Y68.44034
G01 X54.26120 Y68.38490
G01 X54.13935 Y68.32513
G01 X53.31261 Y68.32312
G01 X53.28391 Y68.32884
G01 X53.27093 Y68.33575
G01 X53.25022 Y68.35645
G01 X53.23902 Y68.38347
G01 X53.23760 Y68.39810
G01 X53.23760 Y69.77905
G01 X53.23961 Y69.52376
G01 X53.29937 Y69.40189
G01 X53.35477 Y69.34509
G01 X53.37910 Y69.32884
G01 X53.39318 Y69.32457
G01 X53.42244 Y69.32454
G01 X53.44946 Y69.33575
G01 X53.46084 Y69.34507
G01 X53.47710 Y69.36940
G01 X53.48281 Y69.39810
G01 X53.47712 Y69.42680
G01 X53.47019 Y69.43976
G01 X53.42185 Y69.49015
G01 X53.38759 Y69.55871
G01 X53.38759 Y69.76135
G01 X53.42185 Y69.82990
G01 X53.45226 Y69.86031
G01 X53.52076 Y69.89455
G01 X53.58614 Y69.89455
G01 X53.70067 Y69.85639
G01 X54.27092 Y69.28812
G01 X54.29795 Y69.27692
G01 X54.32724 Y69.27692
G01 X54.35426 Y69.28812
G01 X54.36561 Y69.29747
G01 X54.38187 Y69.32180
G01 X54.38759 Y69.35048
G01 X54.38616 Y69.98418
G01 X54.37496 Y70.01121
G01 X54.35426 Y70.03191
G01 X54.34128 Y70.03882
G01 X54.31261 Y70.04453
G01 X54.29795 Y70.04311
G01 X54.27092 Y70.03191
G01 X54.25022 Y70.01121
G01 X54.23902 Y69.98418
G01 X54.23760 Y69.53155
G01 X53.79419 Y69.97496
G01 X53.76488 Y69.99310
G01 X53.62203 Y70.04070
G01 X53.59833 Y70.04453
G01 X53.48584 Y70.04253
G01 X53.36397 Y69.98279
G01 X53.29937 Y69.91817
G01 X53.24550 Y69.81261
G01 X53.23760 Y69.77905
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X39.25996 Y71.81001 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X39.25996 Y71.81001
G01 X39.26453 Y71.83297
G01 X39.27753 Y71.85245
G01 X39.30827 Y71.86886
G01 X59.75999 Y71.87003
G01 X59.78293 Y71.86546
G01 X59.80241 Y71.85245
G01 X59.81882 Y71.82172
G01 X59.81999 Y70.16000
G01 X59.81595 Y70.13841
G01 X59.79631 Y70.11227
G01 X59.77668 Y70.10239
G01 X59.57663 Y70.08167
G01 X59.40038 Y70.02823
G01 X59.23789 Y69.94136
G01 X59.09550 Y69.82449
G01 X58.97864 Y69.68210
G01 X58.89179 Y69.51964
G01 X58.83833 Y69.34334
G01 X58.82027 Y69.16003
G01 X58.83833 Y68.97672
G01 X58.89179 Y68.80042
G01 X58.97864 Y68.63796
G01 X59.09550 Y68.49556
G01 X59.23789 Y68.37867
G01 X59.40038 Y68.29183
G01 X59.57665 Y68.23839
G01 X59.77820 Y68.21718
G01 X59.79997 Y68.20476
G01 X59.81475 Y68.18452
G01 X59.81999 Y68.16000
G01 X59.81999 Y66.51002
G01 X59.81541 Y66.48708
G01 X59.80241 Y66.46760
G01 X59.77167 Y66.45119
G01 X39.31998 Y66.45003
G01 X39.29699 Y66.45460
G01 X39.27753 Y66.46760
G01 X39.26112 Y66.49834
G01 X39.25996 Y71.81001
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X21.59027 Y88.83502 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X21.59027 Y88.83502
G01 X21.60680 Y89.00279
G01 X21.65570 Y89.16403
G01 X21.73515 Y89.31267
G01 X21.84206 Y89.44292
G01 X21.97233 Y89.54985
G01 X22.12098 Y89.62933
G01 X22.28227 Y89.67822
G01 X22.44998 Y89.69476
G01 X22.61767 Y89.67822
G01 X22.77896 Y89.62933
G01 X22.92760 Y89.54985
G01 X23.05788 Y89.44292
G01 X23.16479 Y89.31267
G01 X23.24426 Y89.16403
G01 X23.29316 Y89.00279
G01 X23.30970 Y88.83502
G01 X23.29316 Y88.66730
G01 X23.24426 Y88.50604
G01 X23.16479 Y88.35740
G01 X23.05788 Y88.22715
G01 X22.92760 Y88.12021
G01 X22.77896 Y88.04076
G01 X22.61767 Y87.99184
G01 X22.44998 Y87.97533
G01 X22.28227 Y87.99184
G01 X22.12098 Y88.04076
G01 X21.97233 Y88.12021
G01 X21.84206 Y88.22715
G01 X21.73515 Y88.35740
G01 X21.65570 Y88.50604
G01 X21.60680 Y88.66730
G01 X21.59027 Y88.83502
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X20.84996 Y88.83502 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X20.84996 Y88.83502
G01 X20.85453 Y88.85801
G01 X20.86754 Y88.87746
G01 X20.88702 Y88.89047
G01 X20.90998 Y88.89504
G01 X21.47561 Y88.89504
G01 X21.49024 Y89.03192
G01 X21.54709 Y89.21539
G01 X21.63865 Y89.38422
G01 X21.76136 Y89.53192
G01 X21.90078 Y89.64635
G01 X22.06962 Y89.73794
G01 X22.25308 Y89.79476
G01 X22.44409 Y89.81477
G01 X22.63533 Y89.79705
G01 X22.81945 Y89.74246
G01 X22.98938 Y89.65290
G01 X23.13858 Y89.53192
G01 X23.26128 Y89.38422
G01 X23.35288 Y89.21539
G01 X23.40972 Y89.03192
G01 X23.42968 Y88.84091
G01 X23.41201 Y88.64965
G01 X23.35737 Y88.46555
G01 X23.26784 Y88.29563
G01 X23.14688 Y88.14645
G01 X22.99915 Y88.02374
G01 X22.83032 Y87.93213
G01 X22.64686 Y87.87531
G01 X22.45585 Y87.85532
G01 X22.26461 Y87.87302
G01 X22.08049 Y87.92763
G01 X21.91056 Y88.01717
G01 X21.76136 Y88.13817
G01 X21.63865 Y88.28587
G01 X21.54709 Y88.45468
G01 X21.49024 Y88.63812
G01 X21.47561 Y88.77505
G01 X20.90998 Y88.77505
G01 X20.88702 Y88.77960
G01 X20.86754 Y88.79265
G01 X20.85453 Y88.81208
G01 X20.84996 Y88.83502
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X21.79545 Y86.45240 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X21.79545 Y86.45240
G01 X21.80116 Y86.48110
G01 X21.80807 Y86.49408
G01 X21.82877 Y86.51478
G01 X21.85580 Y86.52598
G01 X22.08117 Y86.52741
G01 X22.08117 Y87.22375
G01 X22.00955 Y87.15346
G01 X21.90398 Y87.09959
G01 X21.87576 Y87.09187
G01 X21.86106 Y87.09228
G01 X21.83329 Y87.10152
G01 X21.81120 Y87.12070
G01 X21.80335 Y87.13314
G01 X21.79563 Y87.16136
G01 X21.79928 Y87.19040
G01 X21.80528 Y87.20383
G01 X21.82446 Y87.22593
G01 X21.92126 Y87.27594
G01 X22.00264 Y87.35735
G01 X22.10309 Y87.50541
G01 X22.12743 Y87.52169
G01 X22.14150 Y87.52601
G01 X22.17076 Y87.52601
G01 X22.18483 Y87.52171
G01 X22.20919 Y87.50551
G01 X22.22545 Y87.48115
G01 X22.23116 Y87.45240
G01 X22.23116 Y86.52741
G01 X22.44188 Y86.52741
G01 X22.47056 Y86.52169
G01 X22.48353 Y86.51478
G01 X22.50424 Y86.49408
G01 X22.51544 Y86.46706
G01 X22.51544 Y86.43777
G01 X22.50424 Y86.41074
G01 X22.48353 Y86.39004
G01 X22.45651 Y86.37884
G01 X22.44188 Y86.37742
G01 X21.85580 Y86.37884
G01 X21.82877 Y86.39004
G01 X21.80807 Y86.41074
G01 X21.79687 Y86.43777
G01 X21.79545 Y86.45240
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X20.84308 Y86.45240 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X20.84308 Y86.45240
G01 X20.84879 Y86.48110
G01 X20.85570 Y86.49408
G01 X20.87640 Y86.51478
G01 X20.90343 Y86.52598
G01 X21.12880 Y86.52741
G01 X21.12880 Y87.22375
G01 X21.05717 Y87.15346
G01 X20.95161 Y87.09959
G01 X20.92339 Y87.09187
G01 X20.90868 Y87.09228
G01 X20.88092 Y87.10152
G01 X20.85882 Y87.12070
G01 X20.85098 Y87.13314
G01 X20.84325 Y87.16136
G01 X20.84691 Y87.19040
G01 X20.85291 Y87.20383
G01 X20.87208 Y87.22593
G01 X20.96888 Y87.27594
G01 X21.05026 Y87.35735
G01 X21.15072 Y87.50541
G01 X21.17505 Y87.52169
G01 X21.18913 Y87.52601
G01 X21.21839 Y87.52601
G01 X21.23246 Y87.52171
G01 X21.25682 Y87.50551
G01 X21.27307 Y87.48115
G01 X21.27879 Y87.45240
G01 X21.27879 Y86.52741
G01 X21.48951 Y86.52741
G01 X21.51818 Y86.52169
G01 X21.53116 Y86.51478
G01 X21.55186 Y86.49408
G01 X21.56306 Y86.46706
G01 X21.56306 Y86.43777
G01 X21.55186 Y86.41074
G01 X21.53116 Y86.39004
G01 X21.50414 Y86.37884
G01 X21.48951 Y86.37742
G01 X20.90343 Y86.37884
G01 X20.87640 Y86.39004
G01 X20.85570 Y86.41074
G01 X20.84450 Y86.43777
G01 X20.84308 Y86.45240
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X20.04069 Y87.00358 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X20.04069 Y87.00358
G01 X20.04069 Y87.37742
G01 X20.32895 Y87.37742
G01 X20.39746 Y87.34318
G01 X20.42786 Y87.31275
G01 X20.46213 Y87.24422
G01 X20.46213 Y87.13680
G01 X20.42786 Y87.06827
G01 X20.39743 Y87.03784
G01 X20.32893 Y87.00358
G01 X20.04069 Y87.00358
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X19.89070 Y86.45240 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X19.89070 Y86.45240
G01 X19.89070 Y87.45240
G01 X19.89213 Y87.46710
G01 X19.90333 Y87.49408
G01 X19.92403 Y87.51478
G01 X19.95105 Y87.52601
G01 X19.96571 Y87.52740
G01 X20.36388 Y87.52540
G01 X20.48572 Y87.46566
G01 X20.54252 Y87.41021
G01 X20.55659 Y87.39075
G01 X20.61011 Y87.27917
G01 X20.61211 Y87.11907
G01 X20.60421 Y87.08554
G01 X20.55034 Y86.97998
G01 X20.49489 Y86.92319
G01 X20.47541 Y86.90914
G01 X20.38019 Y86.86152
G01 X20.34775 Y86.85372
G01 X20.60576 Y86.48260
G01 X20.61211 Y86.45405
G01 X20.60701 Y86.42522
G01 X20.59129 Y86.40053
G01 X20.56731 Y86.38377
G01 X20.53876 Y86.37742
G01 X20.50993 Y86.38252
G01 X20.48524 Y86.39825
G01 X20.16474 Y86.85359
G01 X20.04069 Y86.85359
G01 X20.04069 Y86.45240
G01 X20.03927 Y86.43777
G01 X20.02807 Y86.41074
G01 X20.00737 Y86.39004
G01 X19.98034 Y86.37884
G01 X19.95105 Y86.37884
G01 X19.92403 Y86.39004
G01 X19.90333 Y86.41074
G01 X19.89213 Y86.43777
G01 X19.89070 Y86.45240
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X15.94545 Y90.68262 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X15.94545 Y90.68262
G01 X15.98886 Y90.50911
G01 X16.02731 Y90.43212
G01 X16.05772 Y90.40167
G01 X16.12627 Y90.36740
G01 X16.18606 Y90.36740
G01 X16.25459 Y90.40167
G01 X16.28500 Y90.43212
G01 X16.32350 Y90.50911
G01 X16.36688 Y90.68262
G01 X16.36688 Y90.90228
G01 X16.32350 Y91.07576
G01 X16.28500 Y91.15275
G01 X16.25459 Y91.18315
G01 X16.18606 Y91.21741
G01 X16.12627 Y91.21741
G01 X16.05774 Y91.18315
G01 X16.02731 Y91.15275
G01 X15.98883 Y91.07576
G01 X15.94545 Y90.90228
G01 X15.94545 Y90.68262
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X15.79546 Y90.67335 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X15.79546 Y90.67335
G01 X15.84532 Y90.46471
G01 X15.89858 Y90.35417
G01 X15.91266 Y90.33464
G01 X15.96945 Y90.27919
G01 X16.07501 Y90.22532
G01 X16.10857 Y90.21747
G01 X16.22101 Y90.21942
G01 X16.33257 Y90.27299
G01 X16.35205 Y90.28701
G01 X16.40747 Y90.34378
G01 X16.46135 Y90.44939
G01 X16.51687 Y90.67335
G01 X16.51687 Y90.91147
G01 X16.46701 Y91.12016
G01 X16.41370 Y91.23070
G01 X16.39968 Y91.25018
G01 X16.34288 Y91.30563
G01 X16.23732 Y91.35950
G01 X16.20379 Y91.36743
G01 X16.10857 Y91.36743
G01 X16.07501 Y91.35950
G01 X15.97976 Y91.31190
G01 X15.96028 Y91.29786
G01 X15.90483 Y91.24104
G01 X15.85099 Y91.13550
G01 X15.79546 Y90.91147
G01 X15.79546 Y90.67335
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X13.05025 Y88.83502 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X13.05025 Y88.83502
G01 X13.06679 Y89.00279
G01 X13.11568 Y89.16403
G01 X13.19516 Y89.31267
G01 X13.30207 Y89.44292
G01 X13.43230 Y89.54985
G01 X13.58099 Y89.62933
G01 X13.74225 Y89.67822
G01 X13.90997 Y89.69476
G01 X14.07768 Y89.67822
G01 X14.23895 Y89.62933
G01 X14.38756 Y89.54985
G01 X14.51787 Y89.44292
G01 X14.62480 Y89.31267
G01 X14.70425 Y89.16403
G01 X14.75315 Y89.00279
G01 X14.76968 Y88.83502
G01 X14.75315 Y88.66730
G01 X14.70425 Y88.50604
G01 X14.62480 Y88.35740
G01 X14.51787 Y88.22715
G01 X14.38756 Y88.12021
G01 X14.23895 Y88.04074
G01 X14.07768 Y87.99184
G01 X13.90997 Y87.97533
G01 X13.74225 Y87.99184
G01 X13.58099 Y88.04076
G01 X13.43230 Y88.12021
G01 X13.30207 Y88.22715
G01 X13.19516 Y88.35740
G01 X13.11568 Y88.50604
G01 X13.06679 Y88.66730
G01 X13.05025 Y88.83502
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X12.93026 Y88.84091 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X12.93026 Y88.84091
G01 X12.95023 Y89.03192
G01 X13.00258 Y89.20454
G01 X13.09211 Y89.37449
G01 X13.22137 Y89.53192
G01 X13.37052 Y89.65290
G01 X13.52963 Y89.73794
G01 X13.71307 Y89.79476
G01 X13.91586 Y89.81477
G01 X14.09531 Y89.79705
G01 X14.27944 Y89.74246
G01 X14.45914 Y89.64635
G01 X14.59856 Y89.53192
G01 X14.72129 Y89.38422
G01 X14.81736 Y89.20454
G01 X14.86971 Y89.03192
G01 X14.88434 Y88.89504
G01 X15.46168 Y88.89387
G01 X15.49241 Y88.87746
G01 X15.50542 Y88.85801
G01 X15.50999 Y88.83502
G01 X15.50542 Y88.81208
G01 X15.48332 Y88.78514
G01 X15.45000 Y88.77505
G01 X14.88434 Y88.77505
G01 X14.86971 Y88.63812
G01 X14.81736 Y88.46555
G01 X14.72129 Y88.28587
G01 X14.59856 Y88.13817
G01 X14.45914 Y88.02374
G01 X14.29028 Y87.93213
G01 X14.10687 Y87.87531
G01 X13.91586 Y87.85532
G01 X13.72460 Y87.87302
G01 X13.54047 Y87.92763
G01 X13.37052 Y88.01717
G01 X13.21307 Y88.14645
G01 X13.09211 Y88.29563
G01 X13.00707 Y88.45468
G01 X12.95023 Y88.63812
G01 X12.93026 Y88.84091
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X13.89066 Y90.29240 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X13.89066 Y90.29240
G01 X13.89209 Y90.27777
G01 X13.90329 Y90.25074
G01 X13.92399 Y90.23004
G01 X13.95099 Y90.21884
G01 X13.98030 Y90.21884
G01 X14.00733 Y90.23004
G01 X14.02803 Y90.25074
G01 X14.03923 Y90.27777
G01 X14.04065 Y90.29240
G01 X14.04065 Y90.69364
G01 X14.16468 Y90.69364
G01 X14.47565 Y90.24942
G01 X14.49681 Y90.22915
G01 X14.52406 Y90.21858
G01 X14.53872 Y90.21747
G01 X14.56729 Y90.22377
G01 X14.59127 Y90.24053
G01 X14.60699 Y90.26524
G01 X14.61210 Y90.29402
G01 X14.60575 Y90.32260
G01 X14.34771 Y90.69377
G01 X14.38015 Y90.70154
G01 X14.47540 Y90.74914
G01 X14.49490 Y90.76321
G01 X14.55035 Y90.82001
G01 X14.60420 Y90.92554
G01 X14.61210 Y90.95907
G01 X14.61009 Y91.11919
G01 X14.55660 Y91.23070
G01 X14.54253 Y91.25018
G01 X14.48574 Y91.30563
G01 X14.36384 Y91.36539
G01 X13.96567 Y91.36743
G01 X13.95099 Y91.36598
G01 X13.92399 Y91.35483
G01 X13.90329 Y91.33408
G01 X13.89209 Y91.30705
G01 X13.89066 Y91.29239
G01 X13.89066 Y90.29240
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X14.04065 Y90.84363 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X14.04065 Y90.84363
G01 X14.32894 Y90.84363
G01 X14.39747 Y90.87789
G01 X14.42787 Y90.90827
G01 X14.46209 Y90.97677
G01 X14.46209 Y91.08424
G01 X14.42787 Y91.15275
G01 X14.39744 Y91.18315
G01 X14.32892 Y91.21741
G01 X14.04065 Y91.21741
G01 X14.04065 Y90.84363
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X14.84367 Y91.01609 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X14.84367 Y91.01609
G01 X14.85292 Y91.04386
G01 X14.87209 Y91.06595
G01 X14.96889 Y91.11597
G01 X15.05028 Y91.19735
G01 X15.15068 Y91.34538
G01 X15.17502 Y91.36169
G01 X15.18909 Y91.36595
G01 X15.21837 Y91.36598
G01 X15.24542 Y91.35483
G01 X15.26612 Y91.33410
G01 X15.27306 Y91.32112
G01 X15.27877 Y91.29239
G01 X15.27877 Y90.36740
G01 X15.48952 Y90.36740
G01 X15.50415 Y90.36598
G01 X15.53117 Y90.35480
G01 X15.55187 Y90.33408
G01 X15.55878 Y90.32110
G01 X15.56450 Y90.29240
G01 X15.56308 Y90.27777
G01 X15.55187 Y90.25074
G01 X15.54253 Y90.23941
G01 X15.53117 Y90.23004
G01 X15.50415 Y90.21884
G01 X14.91809 Y90.21747
G01 X14.90344 Y90.21884
G01 X14.87641 Y90.23004
G01 X14.85571 Y90.25074
G01 X14.84451 Y90.27777
G01 X14.84451 Y90.30705
G01 X14.85571 Y90.33408
G01 X14.87641 Y90.35480
G01 X14.88939 Y90.36169
G01 X14.91809 Y90.36740
G01 X15.12879 Y90.36740
G01 X15.12879 Y91.06372
G01 X15.05716 Y90.99346
G01 X14.95162 Y90.93961
G01 X14.92340 Y90.93189
G01 X14.89435 Y90.93555
G01 X14.86895 Y90.95005
G01 X14.85884 Y90.96072
G01 X14.84575 Y90.98691
G01 X14.84367 Y91.01609
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X12.43997 Y96.48502 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X12.43997 Y96.48502
G01 X12.44454 Y96.46208
G01 X12.45755 Y96.44260
G01 X12.47703 Y96.42960
G01 X12.49999 Y96.42502
G01 X12.52292 Y96.42960
G01 X12.54241 Y96.44260
G01 X12.55541 Y96.46208
G01 X12.55998 Y96.48502
G01 X12.55998 Y102.84503
G01 X12.78167 Y102.84619
G01 X12.81241 Y102.86260
G01 X12.82882 Y102.89334
G01 X12.82999 Y104.00502
G01 X12.82541 Y104.02798
G01 X12.81241 Y104.04746
G01 X12.79293 Y104.06047
G01 X12.76999 Y104.06504
G01 X12.74703 Y104.06047
G01 X12.72755 Y104.04746
G01 X12.71454 Y104.02798
G01 X12.70997 Y104.00502
G01 X12.70997 Y102.96504
G01 X12.48828 Y102.96387
G01 X12.45755 Y102.94746
G01 X12.44454 Y102.92798
G01 X12.43997 Y102.90502
G01 X12.43997 Y96.48502
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X19.06998 Y102.90502 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X19.06998 Y102.90502
G01 X19.06998 Y105.73501
G01 X19.07455 Y105.75797
G01 X19.08755 Y105.77746
G01 X19.10704 Y105.79046
G01 X19.13000 Y105.79503
G01 X19.15293 Y105.79046
G01 X19.17242 Y105.77746
G01 X19.18542 Y105.75797
G01 X19.18999 Y105.73501
G01 X19.18999 Y102.96504
G01 X19.41166 Y102.96387
G01 X19.44239 Y102.94746
G01 X19.45540 Y102.92798
G01 X19.45997 Y102.90502
G01 X19.45997 Y96.48502
G01 X19.45540 Y96.46208
G01 X19.44239 Y96.44260
G01 X19.42291 Y96.42960
G01 X19.39997 Y96.42502
G01 X19.37701 Y96.42960
G01 X19.35753 Y96.44260
G01 X19.34453 Y96.46208
G01 X19.33995 Y96.48502
G01 X19.33995 Y102.84503
G01 X19.11829 Y102.84619
G01 X19.08755 Y102.86260
G01 X19.07455 Y102.88208
G01 X19.06998 Y102.90502
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X19.83759 Y99.78549 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X19.83759 Y99.78549
G01 X19.83759 Y100.45217
G01 X19.84336 Y100.48105
G01 X19.85982 Y100.50548
G01 X19.88440 Y100.52169
G01 X19.91331 Y100.52717
G01 X19.94214 Y100.52113
G01 X20.94214 Y100.09255
G01 X20.96627 Y100.07599
G01 X20.98222 Y100.05146
G01 X20.98758 Y100.02268
G01 X20.98153 Y99.99405
G01 X20.96497 Y99.96992
G01 X20.94043 Y99.95397
G01 X20.91166 Y99.94861
G01 X20.88303 Y99.95466
G01 X19.98758 Y100.33845
G01 X19.98616 Y99.77086
G01 X19.97495 Y99.74384
G01 X19.95425 Y99.72314
G01 X19.92723 Y99.71194
G01 X19.91260 Y99.71051
G01 X19.88390 Y99.71623
G01 X19.87092 Y99.72314
G01 X19.85022 Y99.74384
G01 X19.83901 Y99.77086
G01 X19.83759 Y99.78549
G01 X19.83759 Y98.83312
G01 X19.83901 Y98.81849
G01 X19.85022 Y98.79147
G01 X19.87092 Y98.77076
G01 X19.88390 Y98.76386
G01 X19.91260 Y98.75814
G01 X20.73934 Y98.76015
G01 X20.86121 Y98.81989
G01 X20.91801 Y98.87534
G01 X20.93208 Y98.89484
G01 X20.98557 Y99.00637
G01 X20.98758 Y99.21407
G01 X20.97968 Y99.24762
G01 X20.93208 Y99.34285
G01 X20.91801 Y99.36233
G01 X20.86121 Y99.41778
G01 X20.75565 Y99.47165
G01 X20.72212 Y99.47955
G01 X19.89794 Y99.47813
G01 X19.87092 Y99.46693
G01 X19.85022 Y99.44623
G01 X19.84331 Y99.43325
G01 X19.83759 Y99.40454
G01 X19.83901 Y99.38991
G01 X19.85022 Y99.36289
G01 X19.87092 Y99.34219
G01 X19.89794 Y99.33099
G01 X20.70439 Y99.32956
G01 X20.77292 Y99.29530
G01 X20.80335 Y99.26490
G01 X20.83759 Y99.19639
G01 X20.83759 Y99.04130
G01 X20.80335 Y98.97277
G01 X20.77295 Y98.94237
G01 X20.70442 Y98.90813
G01 X19.89794 Y98.90671
G01 X19.87092 Y98.89550
G01 X19.85022 Y98.87480
G01 X19.83901 Y98.84778
G01 X19.83759 Y98.83312
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X62.23997 Y142.00865 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X62.23997 Y142.00865
G01 X62.23997 Y151.12865
G01 X63.23997 Y151.12865
G01 X63.23997 Y142.00865
G01 X62.23997 Y142.00865
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X62.11996 Y141.94863 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X62.11996 Y141.94863
G01 X62.11996 Y151.18864
G01 X62.12453 Y151.21160
G01 X62.14663 Y151.23855
G01 X62.17998 Y151.24866
G01 X75.41998 Y151.24866
G01 X75.44292 Y151.24409
G01 X75.46987 Y151.22199
G01 X75.47997 Y151.18864
G01 X75.47997 Y141.94863
G01 X75.47540 Y141.92569
G01 X75.45330 Y141.89874
G01 X75.41998 Y141.88864
G01 X62.17998 Y141.88864
G01 X62.15701 Y141.89321
G01 X62.13006 Y141.91531
G01 X62.11996 Y141.94863
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X46.89997 Y155.44002 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X46.89997 Y155.44002
G01 X46.89997 Y157.44001
G01 X46.90454 Y157.46298
G01 X46.91755 Y157.48246
G01 X46.93703 Y157.49546
G01 X46.95999 Y157.50003
G01 X46.98293 Y157.49546
G01 X47.00241 Y157.48246
G01 X47.01541 Y157.46298
G01 X47.01999 Y157.44001
G01 X47.01999 Y155.44002
G01 X47.01541 Y155.41708
G01 X47.00241 Y155.39760
G01 X46.98293 Y155.38460
G01 X46.95999 Y155.38002
G01 X46.93703 Y155.38460
G01 X46.91755 Y155.39760
G01 X46.90454 Y155.41708
G01 X46.89997 Y155.44002
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X43.19759 Y163.77693 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X43.19759 Y163.77693
G01 X43.19759 Y163.92783
G01 X43.23577 Y164.04236
G01 X43.30988 Y164.11648
G01 X43.38687 Y164.15499
G01 X43.56040 Y164.19837
G01 X43.68479 Y164.19837
G01 X43.85832 Y164.15499
G01 X43.93531 Y164.11648
G01 X44.00943 Y164.04236
G01 X44.04760 Y163.92783
G01 X44.04760 Y163.77693
G01 X43.19759 Y163.77693
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X43.04857 Y163.95202 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X43.04857 Y163.95202
G01 X43.10643 Y164.12232
G01 X43.21242 Y164.23114
G01 X43.23191 Y164.24521
G01 X43.34250 Y164.29850
G01 X43.53297 Y164.34612
G01 X43.71222 Y164.34612
G01 X43.90269 Y164.29850
G01 X44.01329 Y164.24521
G01 X44.03277 Y164.23114
G01 X44.13876 Y164.12232
G01 X44.19662 Y163.95202
G01 X44.19617 Y163.68730
G01 X44.18496 Y163.66027
G01 X44.17562 Y163.64892
G01 X44.16426 Y163.63957
G01 X44.13724 Y163.62837
G01 X43.12261 Y163.62695
G01 X43.10795 Y163.62837
G01 X43.08093 Y163.63957
G01 X43.06023 Y163.66027
G01 X43.04903 Y163.68730
G01 X43.04903 Y164.95463
G01 X43.04905 Y164.92537
G01 X43.05332 Y164.91130
G01 X43.06960 Y164.88696
G01 X43.21766 Y164.78651
G01 X43.29906 Y164.70513
G01 X43.34903 Y164.60835
G01 X43.37115 Y164.58917
G01 X43.38456 Y164.58315
G01 X43.41359 Y164.57950
G01 X43.42810 Y164.58196
G01 X43.45426 Y164.59504
G01 X43.47343 Y164.61717
G01 X43.48271 Y164.64493
G01 X43.48311 Y164.65961
G01 X43.47539 Y164.68783
G01 X43.42154 Y164.79342
G01 X43.35126 Y164.86504
G01 X44.04760 Y164.86504
G01 X44.04902 Y164.63967
G01 X44.06023 Y164.61264
G01 X44.08093 Y164.59194
G01 X44.09391 Y164.58503
G01 X44.12261 Y164.57932
G01 X44.13724 Y164.58074
G01 X44.16426 Y164.59194
G01 X44.17562 Y164.60129
G01 X44.18496 Y164.61264
G01 X44.19617 Y164.63967
G01 X44.19617 Y165.24038
G01 X44.18496 Y165.26741
G01 X44.16426 Y165.28811
G01 X44.13724 Y165.29931
G01 X44.10795 Y165.29931
G01 X44.08093 Y165.28811
G01 X44.06023 Y165.26741
G01 X44.05332 Y165.25443
G01 X44.04760 Y165.22572
G01 X44.04760 Y165.01503
G01 X43.12261 Y165.01503
G01 X43.09388 Y165.00932
G01 X43.06955 Y164.99306
G01 X43.05329 Y164.96870
G01 X43.04903 Y164.95463
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X67.94997 Y158.48865 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X67.94997 Y158.48865
G01 X67.95454 Y158.46572
G01 X67.97664 Y158.43877
G01 X68.00999 Y158.42866
G01 X110.14998 Y158.42866
G01 X110.17292 Y158.43323
G01 X110.19987 Y158.45533
G01 X110.20998 Y158.48865
G01 X110.20998 Y177.82865
G01 X110.20541 Y177.85161
G01 X110.18331 Y177.87856
G01 X110.14998 Y177.88867
G01 X68.00999 Y177.88867
G01 X67.98703 Y177.88409
G01 X67.96008 Y177.86200
G01 X67.94997 Y177.82865
G01 X67.94997 Y158.48865
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X68.06998 Y158.54867 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X68.06998 Y158.54867
G01 X110.08996 Y158.54867
G01 X110.08996 Y177.76865
G01 X68.06998 Y177.76865
G01 X68.06998 Y158.54867
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X88.36212 Y156.89602 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X88.36212 Y156.89602
G01 X88.36212 Y157.89602
G01 X88.36354 Y157.91068
G01 X88.37474 Y157.93770
G01 X88.39544 Y157.95840
G01 X88.42247 Y157.96960
G01 X88.43712 Y157.97103
G01 X88.46580 Y157.96531
G01 X88.47878 Y157.95840
G01 X88.49948 Y157.93770
G01 X88.51068 Y157.91068
G01 X88.51210 Y156.97103
G01 X88.91332 Y156.97103
G01 X88.94200 Y156.96531
G01 X88.95498 Y156.95840
G01 X88.97568 Y156.93770
G01 X88.98688 Y156.91068
G01 X88.98830 Y156.89602
G01 X88.98688 Y156.88139
G01 X88.97568 Y156.85437
G01 X88.95498 Y156.83367
G01 X88.94200 Y156.82676
G01 X88.91332 Y156.82104
G01 X88.42247 Y156.82246
G01 X88.39544 Y156.83367
G01 X88.37474 Y156.85437
G01 X88.36783 Y156.86735
G01 X88.36212 Y156.89602
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X89.12404 Y156.89602 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X89.12404 Y156.89602
G01 X89.12546 Y156.88139
G01 X89.13667 Y156.85437
G01 X89.15737 Y156.83367
G01 X89.18439 Y156.82246
G01 X89.77045 Y156.82104
G01 X89.78508 Y156.82246
G01 X89.81208 Y156.83367
G01 X89.83280 Y156.85437
G01 X89.84400 Y156.88139
G01 X89.84400 Y156.91068
G01 X89.83280 Y156.93770
G01 X89.81208 Y156.95840
G01 X89.79912 Y156.96531
G01 X89.77045 Y156.97103
G01 X89.55973 Y156.97103
G01 X89.55973 Y157.89602
G01 X89.55401 Y157.92475
G01 X89.53771 Y157.94908
G01 X89.52638 Y157.95840
G01 X89.49930 Y157.96960
G01 X89.47004 Y157.96958
G01 X89.45597 Y157.96531
G01 X89.43164 Y157.94900
G01 X89.33123 Y157.80097
G01 X89.24985 Y157.71957
G01 X89.15305 Y157.66958
G01 X89.14238 Y157.65947
G01 X89.12788 Y157.63407
G01 X89.12422 Y157.60501
G01 X89.13194 Y157.57679
G01 X89.14990 Y157.55368
G01 X89.17530 Y157.53918
G01 X89.20436 Y157.53552
G01 X89.23258 Y157.54324
G01 X89.33811 Y157.59709
G01 X89.40974 Y157.66734
G01 X89.40974 Y156.97103
G01 X89.18439 Y156.96961
G01 X89.15737 Y156.95840
G01 X89.13667 Y156.93770
G01 X89.12976 Y156.92472
G01 X89.12404 Y156.89602
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X98.60998 Y142.08869 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X98.60998 Y142.08869
G01 X101.75996 Y142.08869
G01 X101.75996 Y143.47865
G01 X98.60998 Y143.47865
G01 X98.60998 Y142.08869
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X96.86317 Y140.89511 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X96.86317 Y140.89511
G01 X96.86690 Y140.92308
G01 X97.11100 Y141.65079
G01 X97.13017 Y141.67289
G01 X97.15636 Y141.68597
G01 X97.18554 Y141.68805
G01 X97.21331 Y141.67883
G01 X97.23540 Y141.65963
G01 X97.24849 Y141.63347
G01 X97.25057 Y141.60426
G01 X97.04211 Y140.97436
G01 X97.33927 Y140.97436
G01 X97.34069 Y141.24734
G01 X97.35189 Y141.27436
G01 X97.37259 Y141.29506
G01 X97.39962 Y141.30626
G01 X97.42890 Y141.30626
G01 X97.45593 Y141.29506
G01 X97.46728 Y141.28574
G01 X97.47663 Y141.27436
G01 X97.48783 Y141.24734
G01 X97.48925 Y140.97436
G01 X97.55712 Y140.97436
G01 X97.58580 Y140.96867
G01 X97.59878 Y140.96174
G01 X97.61948 Y140.94104
G01 X97.63068 Y140.91401
G01 X97.63210 Y140.89936
G01 X97.62639 Y140.87071
G01 X97.61948 Y140.85773
G01 X97.59878 Y140.83700
G01 X97.57175 Y140.82580
G01 X97.48925 Y140.82440
G01 X97.48783 Y140.55140
G01 X97.47663 Y140.52438
G01 X97.45593 Y140.50368
G01 X97.42890 Y140.49247
G01 X97.41427 Y140.49105
G01 X97.39962 Y140.49247
G01 X97.37259 Y140.50368
G01 X97.35189 Y140.52438
G01 X97.34069 Y140.55140
G01 X97.33927 Y140.82440
G01 X96.92395 Y140.82570
G01 X96.91034 Y140.82971
G01 X96.88656 Y140.84485
G01 X96.87721 Y140.85554
G01 X96.86533 Y140.88112
G01 X96.86317 Y140.89511
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X95.96546 Y140.90860 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X95.96546 Y140.90860
G01 X96.00579 Y140.74726
G01 X96.07775 Y140.67528
G01 X96.14623 Y140.64104
G01 X96.28082 Y140.64104
G01 X96.22697 Y140.69491
G01 X96.15847 Y140.72918
G01 X96.06629 Y140.73057
G01 X96.03927 Y140.74177
G01 X96.01857 Y140.76250
G01 X96.00737 Y140.78953
G01 X96.00594 Y140.80413
G01 X96.01166 Y140.83286
G01 X96.01857 Y140.84581
G01 X96.03927 Y140.86651
G01 X96.06629 Y140.87774
G01 X96.19340 Y140.87713
G01 X96.31526 Y140.81739
G01 X96.41425 Y140.71973
G01 X96.44176 Y140.74726
G01 X96.48212 Y140.90860
G01 X96.48212 Y141.22346
G01 X96.44176 Y141.38485
G01 X96.36982 Y141.45678
G01 X96.30129 Y141.49105
G01 X96.14625 Y141.49105
G01 X96.07775 Y141.45678
G01 X96.00579 Y141.38485
G01 X95.96546 Y141.22346
G01 X95.96546 Y140.90860
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X95.81547 Y141.23268 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X95.81547 Y141.23268
G01 X95.86530 Y141.44137
G01 X95.87638 Y141.46588
G01 X95.98946 Y141.57926
G01 X96.09500 Y141.63311
G01 X96.12855 Y141.64106
G01 X96.33624 Y141.63903
G01 X96.45811 Y141.57926
G01 X96.57117 Y141.46588
G01 X96.58224 Y141.44142
G01 X96.62987 Y141.25089
G01 X96.62987 Y140.88120
G01 X96.57780 Y140.67800
G01 X96.56253 Y140.65590
G01 X96.52032 Y140.61368
G01 X96.55392 Y140.58005
G01 X96.63828 Y140.53789
G01 X96.65072 Y140.53004
G01 X96.66990 Y140.50794
G01 X96.67914 Y140.48018
G01 X96.67955 Y140.46547
G01 X96.67183 Y140.43725
G01 X96.65387 Y140.41414
G01 X96.62845 Y140.39964
G01 X96.61412 Y140.39639
G01 X96.58494 Y140.39847
G01 X96.47594 Y140.45133
G01 X96.45646 Y140.46540
G01 X96.39944 Y140.52240
G01 X96.35253 Y140.49895
G01 X96.31902 Y140.49105
G01 X96.12855 Y140.49105
G01 X96.09500 Y140.49895
G01 X95.99977 Y140.54655
G01 X95.98026 Y140.56062
G01 X95.88501 Y140.65590
G01 X95.86972 Y140.67800
G01 X95.81770 Y140.88120
G01 X95.81547 Y141.23268
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X94.90899 Y142.08869 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X94.90899 Y142.08869
G01 X98.48996 Y142.08869
G01 X98.48996 Y143.47865
G01 X94.90899 Y143.47865
G01 X94.90899 Y142.08869
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X91.63999 Y143.59867 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X91.63999 Y143.59867
G01 X101.75996 Y143.59867
G01 X101.75996 Y146.60966
G01 X91.63999 Y146.60966
G01 X91.63999 Y143.59867
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X91.63999 Y142.08869 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X91.63999 Y142.08869
G01 X94.78898 Y142.08869
G01 X94.78898 Y143.47865
G01 X91.63999 Y143.47865
G01 X91.63999 Y142.08869
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X91.51997 Y142.02864 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X91.51997 Y142.02864
G01 X91.53008 Y141.99532
G01 X91.55703 Y141.97322
G01 X91.57999 Y141.96865
G01 X101.81998 Y141.96865
G01 X101.85330 Y141.97878
G01 X101.87540 Y142.00573
G01 X101.87997 Y142.02864
G01 X101.87997 Y146.66965
G01 X101.86986 Y146.70300
G01 X101.84291 Y146.72510
G01 X101.81998 Y146.72967
G01 X91.57999 Y146.72967
G01 X91.54662 Y146.71956
G01 X91.52449 Y146.69261
G01 X91.51997 Y146.66965
G01 X91.51997 Y142.02864
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X85.90998 Y142.08869 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X85.90998 Y142.08869
G01 X89.05996 Y142.08869
G01 X89.05996 Y143.47865
G01 X85.90998 Y143.47865
G01 X85.90998 Y142.08869
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X84.16342 Y141.09732 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X84.16342 Y141.09732
G01 X84.21105 Y141.57352
G01 X84.22060 Y141.60332
G01 X84.24148 Y141.62663
G01 X84.27005 Y141.63939
G01 X84.28570 Y141.64106
G01 X84.76190 Y141.64106
G01 X84.79057 Y141.63532
G01 X84.80355 Y141.62841
G01 X84.82425 Y141.60774
G01 X84.83545 Y141.58069
G01 X84.83545 Y141.55140
G01 X84.82425 Y141.52437
G01 X84.80355 Y141.50367
G01 X84.79057 Y141.49676
G01 X84.76190 Y141.49105
G01 X84.35357 Y141.49105
G01 X84.32875 Y141.24289
G01 X84.36370 Y141.25811
G01 X84.38095 Y141.26011
G01 X84.63627 Y141.25811
G01 X84.75811 Y141.19834
G01 X84.82273 Y141.13370
G01 X84.87658 Y141.02816
G01 X84.88450 Y140.99461
G01 X84.88250 Y140.73934
G01 X84.82898 Y140.62773
G01 X84.81491 Y140.60825
G01 X84.75811 Y140.55280
G01 X84.63627 Y140.49306
G01 X84.36370 Y140.49306
G01 X84.24183 Y140.55280
G01 X84.18504 Y140.60825
G01 X84.17569 Y140.61960
G01 X84.16449 Y140.64663
G01 X84.16449 Y140.67591
G01 X84.17569 Y140.70294
G01 X84.19639 Y140.72364
G01 X84.22342 Y140.73484
G01 X84.25270 Y140.73484
G01 X84.27973 Y140.72364
G01 X84.33010 Y140.67528
G01 X84.39863 Y140.64104
G01 X84.60134 Y140.64104
G01 X84.66985 Y140.67528
G01 X84.70025 Y140.70568
G01 X84.73452 Y140.77424
G01 X84.73452 Y140.97690
G01 X84.70025 Y141.04543
G01 X84.66982 Y141.07584
G01 X84.60132 Y141.11015
G01 X84.39865 Y141.11015
G01 X84.33012 Y141.07584
G01 X84.28019 Y141.02783
G01 X84.25433 Y141.01663
G01 X84.22616 Y141.01582
G01 X84.21247 Y141.01935
G01 X84.18826 Y141.03375
G01 X84.17864 Y141.04414
G01 X84.16594 Y141.06926
G01 X84.16342 Y141.09732
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X83.26546 Y140.90860 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X83.26546 Y140.90860
G01 X83.30579 Y140.74726
G01 X83.37775 Y140.67528
G01 X83.44623 Y140.64104
G01 X83.58082 Y140.64104
G01 X83.52697 Y140.69491
G01 X83.45847 Y140.72918
G01 X83.36629 Y140.73057
G01 X83.33927 Y140.74177
G01 X83.31857 Y140.76250
G01 X83.30737 Y140.78953
G01 X83.30594 Y140.80413
G01 X83.31166 Y140.83286
G01 X83.31857 Y140.84581
G01 X83.33927 Y140.86651
G01 X83.36629 Y140.87774
G01 X83.49340 Y140.87713
G01 X83.61526 Y140.81739
G01 X83.71425 Y140.71973
G01 X83.74176 Y140.74726
G01 X83.78212 Y140.90860
G01 X83.78212 Y141.22346
G01 X83.74176 Y141.38485
G01 X83.66982 Y141.45678
G01 X83.60129 Y141.49105
G01 X83.44625 Y141.49105
G01 X83.37775 Y141.45678
G01 X83.30579 Y141.38485
G01 X83.26546 Y141.22346
G01 X83.26546 Y140.90860
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X83.11547 Y141.23268 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X83.11547 Y141.23268
G01 X83.16530 Y141.44137
G01 X83.17638 Y141.46588
G01 X83.28946 Y141.57926
G01 X83.39500 Y141.63311
G01 X83.42855 Y141.64106
G01 X83.63624 Y141.63903
G01 X83.75811 Y141.57926
G01 X83.87117 Y141.46588
G01 X83.88224 Y141.44142
G01 X83.92987 Y141.25089
G01 X83.92987 Y140.88120
G01 X83.87780 Y140.67800
G01 X83.86253 Y140.65590
G01 X83.82032 Y140.61368
G01 X83.85392 Y140.58005
G01 X83.93828 Y140.53789
G01 X83.95072 Y140.53004
G01 X83.96990 Y140.50794
G01 X83.97914 Y140.48018
G01 X83.97955 Y140.46547
G01 X83.97183 Y140.43725
G01 X83.95387 Y140.41414
G01 X83.92845 Y140.39964
G01 X83.91412 Y140.39639
G01 X83.88494 Y140.39847
G01 X83.77594 Y140.45133
G01 X83.75646 Y140.46540
G01 X83.69944 Y140.52240
G01 X83.65253 Y140.49895
G01 X83.61902 Y140.49105
G01 X83.42855 Y140.49105
G01 X83.39500 Y140.49895
G01 X83.29977 Y140.54655
G01 X83.28026 Y140.56062
G01 X83.18501 Y140.65590
G01 X83.16972 Y140.67800
G01 X83.11770 Y140.88120
G01 X83.11547 Y141.23268
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X82.20899 Y142.08869 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X82.20899 Y142.08869
G01 X85.78996 Y142.08869
G01 X85.78996 Y143.47865
G01 X82.20899 Y143.47865
G01 X82.20899 Y142.08869
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X78.93999 Y143.59867 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X78.93999 Y143.59867
G01 X89.05996 Y143.59867
G01 X89.05996 Y146.60966
G01 X78.93999 Y146.60966
G01 X78.93999 Y143.59867
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X78.93999 Y142.08869 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X78.93999 Y142.08869
G01 X82.08898 Y142.08869
G01 X82.08898 Y143.47865
G01 X78.93999 Y143.47865
G01 X78.93999 Y142.08869
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X78.81997 Y142.02864 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X78.81997 Y142.02864
G01 X78.83008 Y141.99532
G01 X78.85703 Y141.97322
G01 X78.87999 Y141.96865
G01 X89.11998 Y141.96865
G01 X89.15330 Y141.97878
G01 X89.17540 Y142.00573
G01 X89.17997 Y142.02864
G01 X89.17997 Y146.66965
G01 X89.16986 Y146.70300
G01 X89.14291 Y146.72510
G01 X89.11998 Y146.72967
G01 X78.87999 Y146.72967
G01 X78.84664 Y146.71956
G01 X78.82455 Y146.69261
G01 X78.81997 Y146.66965
G01 X78.81997 Y142.02864
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X74.35999 Y142.00865 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X74.35999 Y142.00865
G01 X75.35996 Y142.00865
G01 X75.35996 Y151.12865
G01 X74.35999 Y151.12865
G01 X74.35999 Y142.00865
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X68.93937 Y140.68513 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X68.93937 Y140.68513
G01 X68.94311 Y140.71310
G01 X69.18720 Y141.44081
G01 X69.20638 Y141.46291
G01 X69.23257 Y141.47599
G01 X69.26175 Y141.47807
G01 X69.28951 Y141.46885
G01 X69.31161 Y141.44965
G01 X69.32469 Y141.42346
G01 X69.32677 Y141.39428
G01 X69.11832 Y140.76438
G01 X69.41545 Y140.76438
G01 X69.41687 Y141.03735
G01 X69.42807 Y141.06438
G01 X69.44877 Y141.08508
G01 X69.47580 Y141.09628
G01 X69.50508 Y141.09628
G01 X69.53211 Y141.08508
G01 X69.54346 Y141.07576
G01 X69.55281 Y141.06438
G01 X69.56401 Y141.03735
G01 X69.56543 Y140.76438
G01 X69.63333 Y140.76438
G01 X69.66200 Y140.75867
G01 X69.67498 Y140.75176
G01 X69.69568 Y140.73106
G01 X69.70688 Y140.70403
G01 X69.70831 Y140.68937
G01 X69.70259 Y140.66070
G01 X69.69568 Y140.64774
G01 X69.67498 Y140.62702
G01 X69.64796 Y140.61582
G01 X69.56543 Y140.61442
G01 X69.56401 Y140.34139
G01 X69.55281 Y140.31437
G01 X69.53211 Y140.29367
G01 X69.50508 Y140.28247
G01 X69.49045 Y140.28104
G01 X69.47580 Y140.28247
G01 X69.44877 Y140.29367
G01 X69.42807 Y140.31437
G01 X69.41687 Y140.34139
G01 X69.41545 Y140.61442
G01 X69.00016 Y140.61571
G01 X68.98654 Y140.61970
G01 X68.96277 Y140.63487
G01 X68.95342 Y140.64556
G01 X68.94153 Y140.67114
G01 X68.93937 Y140.68513
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X68.13689 Y140.90723 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X68.13689 Y140.90723
G01 X68.42515 Y140.90723
G01 X68.49365 Y140.94150
G01 X68.52406 Y140.97190
G01 X68.55832 Y141.04043
G01 X68.55832 Y141.14784
G01 X68.52406 Y141.21637
G01 X68.49363 Y141.24680
G01 X68.42515 Y141.28107
G01 X68.13689 Y141.28107
G01 X68.13689 Y140.90723
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X67.98690 Y140.35603 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X67.98690 Y140.35603
G01 X67.98832 Y140.34139
G01 X67.99952 Y140.31437
G01 X68.02022 Y140.29367
G01 X68.04725 Y140.28247
G01 X68.07653 Y140.28247
G01 X68.10356 Y140.29367
G01 X68.12426 Y140.31437
G01 X68.13546 Y140.34139
G01 X68.13689 Y140.35603
G01 X68.13689 Y140.75724
G01 X68.26091 Y140.75724
G01 X68.58144 Y140.30187
G01 X68.60612 Y140.28615
G01 X68.63495 Y140.28104
G01 X68.66350 Y140.28739
G01 X68.68748 Y140.30416
G01 X68.70320 Y140.32885
G01 X68.70831 Y140.35768
G01 X68.70196 Y140.38623
G01 X68.44392 Y140.75737
G01 X68.47638 Y140.76517
G01 X68.57161 Y140.81277
G01 X68.59109 Y140.82681
G01 X68.64654 Y140.88363
G01 X68.70041 Y140.98917
G01 X68.70831 Y141.02270
G01 X68.70630 Y141.18280
G01 X68.65276 Y141.29433
G01 X68.63874 Y141.31383
G01 X68.58192 Y141.36928
G01 X68.46007 Y141.42902
G01 X68.06190 Y141.43103
G01 X68.04725 Y141.42963
G01 X68.02022 Y141.41841
G01 X67.99952 Y141.39770
G01 X67.98832 Y141.37068
G01 X67.98690 Y141.35602
G01 X67.98690 Y140.35603
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X63.35998 Y142.00865 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X63.35998 Y142.00865
G01 X74.23997 Y142.00865
G01 X74.23997 Y151.12865
G01 X63.35998 Y151.12865
G01 X63.35998 Y142.00865
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X74.55902 Y129.47378 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X74.55902 Y129.47378
G01 X74.57022 Y129.50080
G01 X74.57957 Y129.51216
G01 X74.59092 Y129.52150
G01 X74.61795 Y129.53270
G01 X74.64724 Y129.53270
G01 X74.67426 Y129.52150
G01 X74.68561 Y129.51216
G01 X74.70187 Y129.48782
G01 X74.70759 Y129.45912
G01 X74.70759 Y129.28637
G01 X74.74185 Y129.21785
G01 X74.77561 Y129.18409
G01 X74.90149 Y129.10017
G01 X74.97558 Y129.08165
G01 X74.94055 Y129.15617
G01 X74.93855 Y129.36387
G01 X74.94645 Y129.39742
G01 X74.99407 Y129.49267
G01 X75.00814 Y129.51216
G01 X75.06494 Y129.56760
G01 X75.18678 Y129.62734
G01 X75.45935 Y129.62734
G01 X75.58122 Y129.56760
G01 X75.63801 Y129.51216
G01 X75.65206 Y129.49267
G01 X75.70558 Y129.38112
G01 X75.70558 Y129.15617
G01 X75.64581 Y129.03433
G01 X75.59041 Y128.97754
G01 X75.57091 Y128.96346
G01 X75.45935 Y128.90995
G01 X75.06118 Y128.90794
G01 X74.85249 Y128.95780
G01 X74.82907 Y128.96816
G01 X74.68622 Y129.06341
G01 X74.62719 Y129.12036
G01 X74.61312 Y129.13987
G01 X74.55961 Y129.25142
G01 X74.55902 Y129.47378
G01 X74.55856 Y128.30428
G01 X74.60906 Y128.14970
G01 X74.62719 Y128.12039
G01 X74.73159 Y128.01734
G01 X74.83715 Y127.96347
G01 X75.04297 Y127.91018
G01 X75.22222 Y127.91018
G01 X75.41269 Y127.95780
G01 X75.52328 Y128.01109
G01 X75.54276 Y128.02516
G01 X75.63799 Y128.12039
G01 X75.65612 Y128.14970
G01 X75.70662 Y128.30428
G01 X75.70662 Y128.42354
G01 X75.64876 Y128.59379
G01 X75.59041 Y128.65501
G01 X75.56608 Y128.67126
G01 X75.53738 Y128.67698
G01 X75.50868 Y128.67129
G01 X75.48434 Y128.65503
G01 X75.47502 Y128.64368
G01 X75.46382 Y128.61663
G01 X75.46379 Y128.58737
G01 X75.46806 Y128.57330
G01 X75.48432 Y128.54896
G01 X75.51942 Y128.51386
G01 X75.55760 Y128.39933
G01 X75.55760 Y128.32846
G01 X75.51942 Y128.21394
G01 X75.44530 Y128.13982
G01 X75.36832 Y128.10131
G01 X75.19478 Y128.05793
G01 X75.07040 Y128.05793
G01 X74.89687 Y128.10131
G01 X74.81988 Y128.13982
G01 X74.74576 Y128.21394
G01 X74.70759 Y128.32846
G01 X74.70759 Y128.39933
G01 X74.74576 Y128.51383
G01 X74.78086 Y128.54896
G01 X74.79712 Y128.57330
G01 X74.80284 Y128.60197
G01 X74.79712 Y128.63067
G01 X74.79021 Y128.64365
G01 X74.76951 Y128.66435
G01 X74.74249 Y128.67556
G01 X74.71320 Y128.67556
G01 X74.68617 Y128.66435
G01 X74.61643 Y128.59379
G01 X74.56143 Y128.43522
G01 X74.55760 Y128.41150
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X75.08854 Y129.19113 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X75.08854 Y129.19113
G01 X75.08854 Y129.34617
G01 X75.12280 Y129.41470
G01 X75.15320 Y129.44513
G01 X75.22171 Y129.47936
G01 X75.42442 Y129.47936
G01 X75.49293 Y129.44513
G01 X75.52333 Y129.41472
G01 X75.55760 Y129.34617
G01 X75.55760 Y129.19113
G01 X75.52333 Y129.12260
G01 X75.49293 Y129.09219
G01 X75.42440 Y129.05793
G01 X75.22173 Y129.05793
G01 X75.15323 Y129.09219
G01 X75.12280 Y129.12262
G01 X75.08854 Y129.19113
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X76.27997 Y128.80865 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X76.27997 Y128.80865
G01 X76.28366 Y128.78866
G01 X76.28114 Y128.75696
G01 X76.29755 Y128.72623
G01 X76.32828 Y128.70982
G01 X76.38493 Y128.70865
G01 X76.41805 Y128.31305
G01 X76.54886 Y127.84942
G01 X76.77720 Y127.39910
G01 X77.08193 Y127.01117
G01 X77.44634 Y126.69608
G01 X77.84398 Y126.46781
G01 X77.84398 Y125.48664
G01 X77.84855 Y125.46370
G01 X77.86155 Y125.44422
G01 X77.88104 Y125.43121
G01 X77.90400 Y125.42664
G01 X79.93600 Y125.42664
G01 X79.95893 Y125.43121
G01 X79.97842 Y125.44422
G01 X79.99142 Y125.46370
G01 X79.99599 Y125.48664
G01 X79.99599 Y126.46781
G01 X80.39360 Y126.69608
G01 X80.75802 Y127.01117
G01 X81.06274 Y127.39910
G01 X81.29109 Y127.84942
G01 X81.42190 Y128.31305
G01 X81.45499 Y128.70865
G01 X81.51166 Y128.70982
G01 X81.53330 Y128.71876
G01 X81.55540 Y128.74571
G01 X81.55997 Y128.76865
G01 X81.55629 Y128.78866
G01 X81.55997 Y128.80865
G01 X81.55581 Y128.83029
G01 X81.55898 Y128.84863
G01 X81.55482 Y128.87027
G01 X81.55799 Y128.88864
G01 X81.55329 Y128.91185
G01 X81.55598 Y128.92864
G01 X81.55065 Y128.95305
G01 X81.55299 Y128.96865
G01 X81.54699 Y128.99427
G01 X81.54897 Y129.00865
G01 X81.54301 Y129.03423
G01 X81.54499 Y129.04863
G01 X81.53899 Y129.07426
G01 X81.53981 Y129.10035
G01 X81.53434 Y129.11543
G01 X81.53480 Y129.14035
G01 X81.52871 Y129.15663
G01 X81.52881 Y129.18036
G01 X81.52195 Y129.19808
G01 X81.52182 Y129.22036
G01 X81.51494 Y129.23814
G01 X81.51481 Y129.26034
G01 X81.50709 Y129.27967
G01 X81.50681 Y129.30034
G01 X81.49909 Y129.31967
G01 X81.49881 Y129.34035
G01 X81.49025 Y129.36125
G01 X81.48982 Y129.38036
G01 X81.47036 Y129.44259
G01 X81.46980 Y129.46034
G01 X81.45939 Y129.48376
G01 X81.45880 Y129.50136
G01 X81.44760 Y129.52574
G01 X81.44341 Y129.55259
G01 X81.43470 Y129.56684
G01 X81.43041 Y129.59260
G01 X81.42169 Y129.60685
G01 X81.41740 Y129.63260
G01 X81.40780 Y129.64792
G01 X81.40341 Y129.67261
G01 X81.39381 Y129.68792
G01 X81.38941 Y129.71261
G01 X81.37791 Y129.73024
G01 X81.37341 Y129.75259
G01 X81.36190 Y129.77022
G01 X81.35741 Y129.79260
G01 X81.34478 Y129.81160
G01 X81.34041 Y129.83260
G01 X81.32779 Y129.85160
G01 X81.32342 Y129.87261
G01 X81.30856 Y129.89359
G01 X81.29886 Y129.92300
G01 X81.28956 Y129.93357
G01 X81.28540 Y129.95259
G01 X81.26950 Y129.97444
G01 X81.25987 Y130.00299
G01 X81.24732 Y130.01624
G01 X81.23788 Y130.04299
G01 X81.22642 Y130.05536
G01 X81.21687 Y130.08300
G01 X81.20325 Y130.09714
G01 X81.19388 Y130.12300
G01 X81.17915 Y130.13804
G01 X81.16988 Y130.16301
G01 X81.15406 Y130.17896
G01 X81.14486 Y130.20298
G01 X81.12799 Y130.21970
G01 X81.11888 Y130.24299
G01 X81.10094 Y130.26029
G01 X81.09188 Y130.28299
G01 X81.07394 Y130.30029
G01 X81.06488 Y130.32300
G01 X81.04362 Y130.34205
G01 X81.03488 Y130.36300
G01 X81.01362 Y130.38208
G01 X81.00488 Y130.40298
G01 X80.98240 Y130.42269
G01 X80.96640 Y130.45208
G01 X80.94903 Y130.46397
G01 X80.93341 Y130.49209
G01 X80.91484 Y130.50461
G01 X80.89939 Y130.53209
G01 X80.87857 Y130.54550
G01 X80.86340 Y130.57210
G01 X80.84146 Y130.58586
G01 X80.82640 Y130.61208
G01 X80.80336 Y130.62617
G01 X80.78840 Y130.65208
G01 X80.76206 Y130.66717
G01 X80.74740 Y130.69209
G01 X80.71997 Y130.70750
G01 X80.70541 Y130.73209
G01 X80.67575 Y130.74820
G01 X80.66886 Y130.76300
G01 X80.65230 Y130.77956
G01 X80.62962 Y130.78861
G01 X80.61540 Y130.81208
G01 X80.59592 Y130.82508
G01 X80.58156 Y130.82879
G01 X80.57488 Y130.84299
G01 X80.55832 Y130.85955
G01 X80.53049 Y130.86910
G01 X80.52388 Y130.88299
G01 X80.50732 Y130.89955
G01 X80.47638 Y130.90941
G01 X80.46988 Y130.92300
G01 X80.45332 Y130.93956
G01 X80.41931 Y130.94967
G01 X80.41288 Y130.96300
G01 X80.39632 Y130.97956
G01 X80.37468 Y130.98851
G01 X80.35929 Y130.98967
G01 X80.35286 Y131.00298
G01 X80.33630 Y131.01954
G01 X80.31466 Y131.02848
G01 X80.29531 Y131.02965
G01 X80.28141 Y131.05208
G01 X80.26193 Y131.06509
G01 X80.22731 Y131.06966
G01 X80.21342 Y131.09209
G01 X80.19394 Y131.10509
G01 X80.15431 Y131.10966
G01 X80.14042 Y131.13209
G01 X80.12094 Y131.14510
G01 X80.07430 Y131.14967
G01 X80.06041 Y131.17210
G01 X80.04093 Y131.18510
G01 X80.01799 Y131.18967
G01 X79.98731 Y131.18967
G01 X79.97341 Y131.21208
G01 X79.95393 Y131.22508
G01 X79.93099 Y131.22965
G01 X79.89129 Y131.22965
G01 X79.87740 Y131.25208
G01 X79.85792 Y131.26509
G01 X79.83498 Y131.26966
G01 X79.78129 Y131.26966
G01 X79.76739 Y131.29209
G01 X79.74791 Y131.30509
G01 X79.72498 Y131.30966
G01 X79.65330 Y131.30966
G01 X79.63940 Y131.33209
G01 X79.61992 Y131.34510
G01 X79.59698 Y131.34967
G01 X79.49429 Y131.34967
G01 X79.48040 Y131.37210
G01 X79.44966 Y131.38850
G01 X79.26031 Y131.38967
G01 X79.25388 Y131.40298
G01 X79.23732 Y131.41954
G01 X79.20400 Y131.42965
G01 X78.62427 Y131.42848
G01 X78.59353 Y131.41208
G01 X78.57964 Y131.38967
G01 X78.39028 Y131.38850
G01 X78.35955 Y131.37210
G01 X78.34565 Y131.34967
G01 X78.23128 Y131.34850
G01 X78.20054 Y131.33209
G01 X78.18665 Y131.30966
G01 X78.11500 Y131.30966
G01 X78.09203 Y131.30509
G01 X78.07255 Y131.29209
G01 X78.05866 Y131.26966
G01 X78.00499 Y131.26966
G01 X77.98203 Y131.26509
G01 X77.96255 Y131.25208
G01 X77.94865 Y131.22965
G01 X77.90898 Y131.22965
G01 X77.88602 Y131.22508
G01 X77.86653 Y131.21208
G01 X77.85264 Y131.18967
G01 X77.82198 Y131.18967
G01 X77.79902 Y131.18510
G01 X77.77954 Y131.17210
G01 X77.76564 Y131.14967
G01 X77.71904 Y131.14510
G01 X77.69955 Y131.13209
G01 X77.68566 Y131.10966
G01 X77.65729 Y131.10849
G01 X77.63565 Y131.09955
G01 X77.61909 Y131.08299
G01 X77.61266 Y131.06966
G01 X77.58927 Y131.06849
G01 X77.56763 Y131.05955
G01 X77.55107 Y131.04299
G01 X77.54464 Y131.02965
G01 X77.52528 Y131.02848
G01 X77.50364 Y131.01954
G01 X77.48708 Y131.00298
G01 X77.48066 Y130.98967
G01 X77.45404 Y130.98510
G01 X77.43456 Y130.97210
G01 X77.42066 Y130.94967
G01 X77.38663 Y130.93956
G01 X77.37006 Y130.92300
G01 X77.36356 Y130.90941
G01 X77.33263 Y130.89955
G01 X77.31606 Y130.88299
G01 X77.30946 Y130.86910
G01 X77.28165 Y130.85955
G01 X77.26509 Y130.84299
G01 X77.25841 Y130.82879
G01 X77.23364 Y130.81954
G01 X77.21708 Y130.80298
G01 X77.21032 Y130.78861
G01 X77.19803 Y130.78510
G01 X77.17855 Y130.77210
G01 X77.16420 Y130.74817
G01 X77.14365 Y130.73956
G01 X77.12709 Y130.72300
G01 X77.12000 Y130.70750
G01 X77.09254 Y130.69209
G01 X77.07789 Y130.66717
G01 X77.05155 Y130.65208
G01 X77.03659 Y130.62617
G01 X77.01355 Y130.61208
G01 X76.99849 Y130.58586
G01 X76.97654 Y130.57210
G01 X76.96138 Y130.54550
G01 X76.94055 Y130.53209
G01 X76.92511 Y130.50461
G01 X76.90654 Y130.49209
G01 X76.89092 Y130.46397
G01 X76.87355 Y130.45208
G01 X76.85754 Y130.42269
G01 X76.83506 Y130.40298
G01 X76.82633 Y130.38208
G01 X76.80507 Y130.36300
G01 X76.79633 Y130.34205
G01 X76.77507 Y130.32300
G01 X76.76600 Y130.30029
G01 X76.74807 Y130.28299
G01 X76.73900 Y130.26029
G01 X76.72107 Y130.24299
G01 X76.71195 Y130.21970
G01 X76.69514 Y130.20304
G01 X76.68592 Y130.17896
G01 X76.67007 Y130.16301
G01 X76.66080 Y130.13801
G01 X76.64609 Y130.12300
G01 X76.63672 Y130.09714
G01 X76.62308 Y130.08300
G01 X76.61353 Y130.05536
G01 X76.60207 Y130.04299
G01 X76.59262 Y130.01624
G01 X76.57454 Y129.99260
G01 X76.57045 Y129.97444
G01 X76.56008 Y129.96298
G01 X76.55038 Y129.93357
G01 X76.53555 Y129.91261
G01 X76.53136 Y129.89356
G01 X76.51655 Y129.87261
G01 X76.51218 Y129.85165
G01 X76.49953 Y129.83260
G01 X76.49516 Y129.81160
G01 X76.48254 Y129.79260
G01 X76.47804 Y129.77022
G01 X76.46654 Y129.75259
G01 X76.46204 Y129.73024
G01 X76.45053 Y129.71261
G01 X76.44614 Y129.68792
G01 X76.43654 Y129.67261
G01 X76.43214 Y129.64792
G01 X76.42254 Y129.63260
G01 X76.41825 Y129.60685
G01 X76.40954 Y129.59260
G01 X76.40525 Y129.56684
G01 X76.39653 Y129.55259
G01 X76.39234 Y129.52574
G01 X76.38114 Y129.50136
G01 X76.38056 Y129.48376
G01 X76.37014 Y129.46034
G01 X76.36958 Y129.44259
G01 X76.36014 Y129.42036
G01 X76.35958 Y129.40261
G01 X76.35013 Y129.38036
G01 X76.34970 Y129.36125
G01 X76.34114 Y129.34035
G01 X76.34086 Y129.31967
G01 X76.32513 Y129.26034
G01 X76.32501 Y129.23814
G01 X76.31812 Y129.22036
G01 X76.31800 Y129.19808
G01 X76.31114 Y129.18036
G01 X76.31124 Y129.15663
G01 X76.30398 Y129.12864
G01 X76.30560 Y129.11543
G01 X76.30014 Y129.10035
G01 X76.30095 Y129.07426
G01 X76.29613 Y129.06034
G01 X76.29694 Y129.03423
G01 X76.29214 Y129.02036
G01 X76.29295 Y128.99427
G01 X76.28696 Y128.96865
G01 X76.28929 Y128.95305
G01 X76.28396 Y128.92864
G01 X76.28668 Y128.91183
G01 X76.28198 Y128.88864
G01 X76.28515 Y128.87032
G01 X76.28096 Y128.84863
G01 X76.28414 Y128.83029
G01 X76.27997 Y128.80865
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X76.50530 Y128.70865 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X76.50530 Y128.70865
G01 X76.53512 Y128.34000
G01 X76.66275 Y127.88762
G01 X76.87532 Y127.46840
G01 X77.16486 Y127.09811
G01 X77.52041 Y126.79067
G01 X77.93372 Y126.55476
G01 X77.95241 Y126.53807
G01 X77.95876 Y126.52717
G01 X77.96399 Y126.50264
G01 X77.96399 Y125.54666
G01 X79.87598 Y125.54666
G01 X79.87598 Y126.50264
G01 X79.88121 Y126.52717
G01 X79.88756 Y126.53807
G01 X79.90623 Y126.55476
G01 X80.31954 Y126.79067
G01 X80.67509 Y127.09811
G01 X80.96462 Y127.46840
G01 X81.17719 Y127.88762
G01 X81.30483 Y128.34000
G01 X81.33462 Y128.70865
G01 X76.50530 Y128.70865
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X77.93615 Y129.46915 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X77.93615 Y129.46915
G01 X77.93999 Y129.44863
G01 X77.93631 Y129.38866
G01 X77.93999 Y129.36865
G01 X77.93631 Y129.34866
G01 X77.93999 Y129.32864
G01 X77.93631 Y129.30865
G01 X77.93999 Y129.28864
G01 X77.93631 Y129.26865
G01 X77.93999 Y129.24863
G01 X77.93631 Y129.18866
G01 X77.93999 Y129.12864
G01 X77.93631 Y129.06865
G01 X77.93999 Y129.04863
G01 X77.93631 Y129.02867
G01 X79.90364 Y129.02867
G01 X79.89996 Y129.04863
G01 X79.90364 Y129.06865
G01 X79.89996 Y129.08864
G01 X79.90364 Y129.10865
G01 X79.89996 Y129.12864
G01 X79.90364 Y129.14866
G01 X79.89996 Y129.16865
G01 X79.90364 Y129.18866
G01 X79.89996 Y129.20865
G01 X79.90364 Y129.26865
G01 X79.89996 Y129.28864
G01 X79.90364 Y129.30865
G01 X79.89996 Y129.32864
G01 X79.90364 Y129.34866
G01 X79.89996 Y129.36865
G01 X79.90364 Y129.38866
G01 X79.89996 Y129.44863
G01 X79.90379 Y129.46915
G01 X79.89996 Y129.48965
G01 X79.90364 Y129.50964
G01 X79.89996 Y129.52963
G01 X79.90364 Y129.54965
G01 X79.89996 Y129.56964
G01 X79.90364 Y129.58965
G01 X79.89996 Y129.60964
G01 X79.90364 Y129.62966
G01 X79.89996 Y129.64965
G01 X79.90364 Y129.66966
G01 X79.89996 Y129.68965
G01 X79.90364 Y129.70964
G01 X79.89996 Y129.72963
G01 X79.90364 Y129.74965
G01 X79.89996 Y129.76964
G01 X79.90364 Y129.78965
G01 X79.89996 Y129.80964
G01 X79.90364 Y129.82966
G01 X79.89996 Y129.84965
G01 X79.90364 Y129.86966
G01 X79.89996 Y129.88965
G01 X79.90364 Y129.90964
G01 X79.89996 Y129.92963
G01 X79.90364 Y129.94965
G01 X79.89996 Y129.96964
G01 X79.90364 Y129.98965
G01 X79.89996 Y130.00964
G01 X79.90364 Y130.02966
G01 X79.89996 Y130.04964
G01 X79.90364 Y130.06966
G01 X79.89996 Y130.08965
G01 X79.90364 Y130.10967
G01 X79.89996 Y130.12965
G01 X79.90364 Y130.14964
G01 X79.89996 Y130.16963
G01 X79.90364 Y130.18965
G01 X79.89996 Y130.20964
G01 X79.90364 Y130.22965
G01 X79.89996 Y130.24964
G01 X79.90364 Y130.26966
G01 X79.89996 Y130.28965
G01 X79.90364 Y130.30966
G01 X79.89996 Y130.32965
G01 X79.90364 Y130.34964
G01 X79.89996 Y130.36963
G01 X79.90364 Y130.38965
G01 X79.89996 Y130.40964
G01 X79.90364 Y130.42965
G01 X79.89996 Y130.44964
G01 X79.90364 Y130.46966
G01 X79.89996 Y130.48965
G01 X79.90364 Y130.50966
G01 X79.89996 Y130.52965
G01 X79.90364 Y130.54964
G01 X79.89996 Y130.56963
G01 X79.90364 Y130.58965
G01 X79.89996 Y130.60964
G01 X79.90364 Y130.62965
G01 X79.89996 Y130.64964
G01 X79.90364 Y130.66966
G01 X79.89996 Y130.68965
G01 X79.90364 Y130.70966
G01 X79.89996 Y130.72965
G01 X79.90364 Y130.74964
G01 X79.89996 Y130.76963
G01 X79.90364 Y130.78965
G01 X79.89996 Y130.80964
G01 X79.90364 Y130.82965
G01 X79.89996 Y130.84964
G01 X79.90364 Y130.86966
G01 X79.89996 Y130.88965
G01 X79.90364 Y130.90966
G01 X79.89996 Y130.92965
G01 X79.90364 Y130.94964
G01 X79.90077 Y130.97794
G01 X79.83800 Y131.01106
G01 X79.77600 Y131.02965
G01 X78.06392 Y131.02965
G01 X78.00194 Y131.01106
G01 X77.93918 Y130.97794
G01 X77.93631 Y130.94964
G01 X77.93999 Y130.92965
G01 X77.93631 Y130.90966
G01 X77.93999 Y130.88965
G01 X77.93631 Y130.86966
G01 X77.93999 Y130.84964
G01 X77.93631 Y130.82965
G01 X77.93999 Y130.80964
G01 X77.93631 Y130.78965
G01 X77.93999 Y130.76963
G01 X77.93631 Y130.74964
G01 X77.93999 Y130.72965
G01 X77.93631 Y130.70966
G01 X77.93999 Y130.68965
G01 X77.93631 Y130.66966
G01 X77.93999 Y130.64964
G01 X77.93631 Y130.62965
G01 X77.93999 Y130.60964
G01 X77.93631 Y130.58965
G01 X77.93999 Y130.56963
G01 X77.93631 Y130.54964
G01 X77.93999 Y130.52965
G01 X77.93631 Y130.50966
G01 X77.93999 Y130.48965
G01 X77.93631 Y130.46966
G01 X77.93999 Y130.44964
G01 X77.93631 Y130.42965
G01 X77.93999 Y130.40964
G01 X77.93631 Y130.38965
G01 X77.93999 Y130.36963
G01 X77.93631 Y130.34964
G01 X77.93999 Y130.32965
G01 X77.93631 Y130.30966
G01 X77.93999 Y130.28965
G01 X77.93631 Y130.26966
G01 X77.93999 Y130.24964
G01 X77.93631 Y130.22965
G01 X77.93999 Y130.20964
G01 X77.93631 Y130.18965
G01 X77.93999 Y130.16966
G01 X77.93631 Y130.14964
G01 X77.93999 Y130.12965
G01 X77.93631 Y130.10967
G01 X77.93999 Y130.08965
G01 X77.93631 Y130.06966
G01 X77.93999 Y130.04964
G01 X77.93631 Y130.02966
G01 X77.93999 Y130.00964
G01 X77.93631 Y129.98965
G01 X77.93999 Y129.96964
G01 X77.93631 Y129.94965
G01 X77.93999 Y129.92963
G01 X77.93631 Y129.90964
G01 X77.93999 Y129.88965
G01 X77.93631 Y129.86966
G01 X77.93999 Y129.84965
G01 X77.93631 Y129.82966
G01 X77.93999 Y129.80964
G01 X77.93631 Y129.78965
G01 X77.93999 Y129.76964
G01 X77.93631 Y129.74965
G01 X77.93999 Y129.72963
G01 X77.93631 Y129.70964
G01 X77.93999 Y129.68965
G01 X77.93631 Y129.66966
G01 X77.93999 Y129.64965
G01 X77.93631 Y129.62966
G01 X77.93999 Y129.60964
G01 X77.93631 Y129.58965
G01 X77.93999 Y129.56964
G01 X77.93631 Y129.54965
G01 X77.93999 Y129.52963
G01 X77.93631 Y129.50964
G01 X77.93999 Y129.48965
G01 X77.93615 Y129.46915
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X76.06598 Y125.23264 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X76.06598 Y125.23264
G01 X76.07055 Y125.20970
G01 X76.08355 Y125.19022
G01 X76.11429 Y125.17381
G01 X76.31596 Y125.17264
G01 X76.31713 Y124.97097
G01 X76.33354 Y124.94023
G01 X76.35302 Y124.92723
G01 X76.37599 Y124.92265
G01 X76.39892 Y124.92723
G01 X76.41840 Y124.94023
G01 X76.43481 Y124.97097
G01 X76.43598 Y125.17264
G01 X76.63768 Y125.17381
G01 X76.66842 Y125.19022
G01 X76.68142 Y125.20970
G01 X76.68599 Y125.23264
G01 X76.68142 Y125.25560
G01 X76.66842 Y125.27508
G01 X76.63768 Y125.29149
G01 X76.43598 Y125.29266
G01 X76.43481 Y125.49436
G01 X76.41840 Y125.52509
G01 X76.39892 Y125.53810
G01 X76.37599 Y125.54267
G01 X76.35302 Y125.53810
G01 X76.33354 Y125.52509
G01 X76.31713 Y125.49436
G01 X76.31596 Y125.29266
G01 X76.11429 Y125.29149
G01 X76.08355 Y125.27508
G01 X76.07055 Y125.25560
G01 X76.06598 Y125.23264
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X69.48761 Y121.76389 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X69.48761 Y121.76389
G01 X69.48961 Y121.50856
G01 X69.54938 Y121.38670
G01 X69.60480 Y121.32993
G01 X69.62914 Y121.31367
G01 X69.65784 Y121.30796
G01 X69.67247 Y121.30938
G01 X69.69949 Y121.32058
G01 X69.72019 Y121.34128
G01 X69.73140 Y121.36831
G01 X69.73282 Y121.38294
G01 X69.73140 Y121.39759
G01 X69.72019 Y121.42462
G01 X69.67186 Y121.47499
G01 X69.63759 Y121.54352
G01 X69.63759 Y121.74618
G01 X69.67186 Y121.81471
G01 X69.70226 Y121.84511
G01 X69.77079 Y121.87938
G01 X69.83612 Y121.87938
G01 X69.95065 Y121.84120
G01 X70.52093 Y121.27295
G01 X70.54796 Y121.26175
G01 X70.57724 Y121.26175
G01 X70.60427 Y121.27295
G01 X70.62497 Y121.29366
G01 X70.63188 Y121.30663
G01 X70.63759 Y121.33531
G01 X70.63759 Y121.95436
G01 X70.63617 Y121.96902
G01 X70.62497 Y121.99604
G01 X70.60427 Y122.01674
G01 X70.59129 Y122.02365
G01 X70.56261 Y122.02937
G01 X70.54796 Y122.02794
G01 X70.52093 Y122.01674
G01 X70.50023 Y121.99604
G01 X70.48903 Y121.96902
G01 X70.48760 Y121.51639
G01 X70.04420 Y121.95977
G01 X70.01489 Y121.97791
G01 X69.87201 Y122.02553
G01 X69.84831 Y122.02937
G01 X69.73584 Y122.02736
G01 X69.61397 Y121.96759
G01 X69.54938 Y121.90298
G01 X69.49553 Y121.79744
G01 X69.48761 Y121.76389
G01 X69.48857 Y120.68065
G01 X69.54643 Y120.85096
G01 X69.65243 Y120.95977
G01 X69.67191 Y120.97384
G01 X69.78250 Y121.02713
G01 X69.97298 Y121.07476
G01 X70.15222 Y121.07476
G01 X70.34270 Y121.02713
G01 X70.45326 Y120.97382
G01 X70.47275 Y120.95980
G01 X70.57877 Y120.85096
G01 X70.63663 Y120.68065
G01 X70.63617 Y120.41591
G01 X70.62497 Y120.38888
G01 X70.61562 Y120.37753
G01 X70.60427 Y120.36818
G01 X70.57724 Y120.35698
G01 X69.54796 Y120.35698
G01 X69.52093 Y120.36818
G01 X69.50023 Y120.38888
G01 X69.48903 Y120.41591
G01 X69.48857 Y120.68065
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X69.63759 Y120.50554 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X69.63759 Y120.50554
G01 X70.48760 Y120.50554
G01 X70.48760 Y120.65647
G01 X70.44943 Y120.77100
G01 X70.37529 Y120.84512
G01 X70.29832 Y120.88362
G01 X70.12479 Y120.92701
G01 X70.00041 Y120.92701
G01 X69.82687 Y120.88362
G01 X69.74989 Y120.84512
G01 X69.67577 Y120.77100
G01 X69.63759 Y120.65647
G01 X69.63759 Y120.50554
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X71.15999 Y119.52866 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X71.15999 Y119.52866
G01 X71.15999 Y123.82865
G01 X73.97998 Y123.82865
G01 X73.97998 Y119.52866
G01 X71.15999 Y119.52866
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X71.15999 Y118.50867 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X71.15999 Y118.50867
G01 X71.15999 Y119.16864
G01 X73.97998 Y119.16864
G01 X73.97998 Y118.50867
G01 X71.15999 Y118.50867
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X71.03998 Y118.44865 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X71.03998 Y118.44865
G01 X71.04115 Y123.90036
G01 X71.05756 Y123.93109
G01 X71.07704 Y123.94409
G01 X71.10000 Y123.94867
G01 X72.50998 Y123.94867
G01 X72.50998 Y124.90863
G01 X72.51455 Y124.93160
G01 X72.52755 Y124.95108
G01 X72.54704 Y124.96408
G01 X72.57000 Y124.96865
G01 X72.59293 Y124.96408
G01 X72.61242 Y124.95108
G01 X72.62542 Y124.93160
G01 X72.62999 Y124.90863
G01 X72.62999 Y123.94867
G01 X74.04000 Y123.94867
G01 X74.06293 Y123.94409
G01 X74.08242 Y123.93109
G01 X74.09542 Y123.91161
G01 X74.09999 Y123.88865
G01 X74.09882 Y118.43697
G01 X74.08242 Y118.40623
G01 X74.06293 Y118.39323
G01 X74.04000 Y118.38866
G01 X72.62999 Y118.38866
G01 X72.62999 Y117.42864
G01 X72.62542 Y117.40570
G01 X72.61242 Y117.38622
G01 X72.58168 Y117.36981
G01 X72.54704 Y117.37322
G01 X72.52755 Y117.38622
G01 X72.51455 Y117.40570
G01 X72.50998 Y117.42864
G01 X72.50998 Y118.38866
G01 X71.10000 Y118.38866
G01 X71.07704 Y118.39323
G01 X71.05756 Y118.40623
G01 X71.04455 Y118.42572
G01 X71.03998 Y118.44865
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X69.85761 Y115.82674 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X69.85761 Y115.82674
G01 X69.85903 Y115.84139
G01 X69.87023 Y115.86842
G01 X69.89093 Y115.88912
G01 X69.90391 Y115.89603
G01 X69.93261 Y115.90174
G01 X70.32296 Y115.90174
G01 X69.87958 Y116.34515
G01 X69.86332 Y116.36948
G01 X69.85761 Y116.39816
G01 X69.85903 Y116.41282
G01 X69.87023 Y116.43984
G01 X69.89093 Y116.46054
G01 X69.91796 Y116.47174
G01 X69.94724 Y116.47174
G01 X69.97427 Y116.46054
G01 X70.36822 Y116.06862
G01 X70.90018 Y116.46580
G01 X70.92852 Y116.47307
G01 X70.94320 Y116.47243
G01 X70.97081 Y116.46270
G01 X70.98268 Y116.45402
G01 X71.00023 Y116.43060
G01 X71.00749 Y116.40225
G01 X71.00335 Y116.37329
G01 X70.98844 Y116.34810
G01 X70.47536 Y115.96148
G01 X70.53510 Y115.90174
G01 X70.93261 Y115.90174
G01 X70.96129 Y115.89603
G01 X70.97427 Y115.88912
G01 X70.99497 Y115.86842
G01 X71.00617 Y115.84139
G01 X71.00617 Y115.81211
G01 X70.99497 Y115.78508
G01 X70.97427 Y115.76438
G01 X70.94724 Y115.75318
G01 X70.93261 Y115.75176
G01 X69.93261 Y115.75176
G01 X69.91796 Y115.75318
G01 X69.89093 Y115.76438
G01 X69.87023 Y115.78508
G01 X69.85903 Y115.81211
G01 X69.85761 Y115.82674
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X76.06598 Y117.61264 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X76.06598 Y117.61264
G01 X76.07055 Y117.63560
G01 X76.08355 Y117.65508
G01 X76.11429 Y117.67149
G01 X76.31596 Y117.67266
G01 X76.31713 Y117.87436
G01 X76.33354 Y117.90509
G01 X76.35302 Y117.91810
G01 X76.37599 Y117.92267
G01 X76.39892 Y117.91810
G01 X76.41840 Y117.90509
G01 X76.43481 Y117.87436
G01 X76.43598 Y117.67266
G01 X76.63768 Y117.67149
G01 X76.66842 Y117.65508
G01 X76.68142 Y117.63560
G01 X76.68599 Y117.61264
G01 X76.68142 Y117.58970
G01 X76.66842 Y117.57022
G01 X76.63768 Y117.55381
G01 X76.43598 Y117.55264
G01 X76.43481 Y117.35097
G01 X76.41840 Y117.32023
G01 X76.39892 Y117.30723
G01 X76.37599 Y117.30266
G01 X76.35302 Y117.30723
G01 X76.33354 Y117.32023
G01 X76.31713 Y117.35097
G01 X76.31596 Y117.55264
G01 X76.11429 Y117.55381
G01 X76.08355 Y117.57022
G01 X76.07055 Y117.58970
G01 X76.06598 Y117.61264
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X74.55760 Y120.79150 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X74.55760 Y120.79150
G01 X74.56143 Y120.81522
G01 X74.61643 Y120.97379
G01 X74.68617 Y121.04435
G01 X74.71320 Y121.05556
G01 X74.74249 Y121.05556
G01 X74.76951 Y121.04435
G01 X74.79021 Y121.02365
G01 X74.79712 Y121.01067
G01 X74.80284 Y120.98197
G01 X74.79712 Y120.95330
G01 X74.78086 Y120.92896
G01 X74.74576 Y120.89383
G01 X74.70759 Y120.77933
G01 X74.70759 Y120.70846
G01 X74.74576 Y120.59394
G01 X74.81988 Y120.51982
G01 X74.89687 Y120.48131
G01 X75.07040 Y120.43793
G01 X75.19478 Y120.43793
G01 X75.36832 Y120.48131
G01 X75.44530 Y120.51982
G01 X75.51942 Y120.59394
G01 X75.55760 Y120.70846
G01 X75.55760 Y120.77933
G01 X75.51942 Y120.89386
G01 X75.48432 Y120.92896
G01 X75.46806 Y120.95330
G01 X75.46379 Y120.96737
G01 X75.46382 Y120.99663
G01 X75.47502 Y121.02368
G01 X75.48434 Y121.03503
G01 X75.50868 Y121.05129
G01 X75.53738 Y121.05698
G01 X75.56608 Y121.05126
G01 X75.59041 Y121.03501
G01 X75.64876 Y120.97379
G01 X75.70662 Y120.80354
G01 X75.70662 Y120.68428
G01 X75.65612 Y120.52970
G01 X75.63799 Y120.50039
G01 X75.54276 Y120.40516
G01 X75.52328 Y120.39109
G01 X75.41269 Y120.33780
G01 X75.22222 Y120.29018
G01 X75.04297 Y120.29018
G01 X74.83715 Y120.34347
G01 X74.73159 Y120.39734
G01 X74.62719 Y120.50039
G01 X74.60906 Y120.52970
G01 X74.55856 Y120.68428
G01 X74.55760 Y121.41055
G01 X74.55925 Y121.39493
G01 X74.57200 Y121.36635
G01 X74.59532 Y121.34547
G01 X74.62514 Y121.33592
G01 X75.10134 Y121.28830
G01 X75.12938 Y121.29081
G01 X75.15452 Y121.30351
G01 X75.16489 Y121.31314
G01 X75.17929 Y121.33734
G01 X75.18285 Y121.35103
G01 X75.18201 Y121.37920
G01 X75.17083 Y121.40506
G01 X75.12280 Y121.45500
G01 X75.08854 Y121.52353
G01 X75.08854 Y121.72617
G01 X75.12280 Y121.79470
G01 X75.15320 Y121.82512
G01 X75.22171 Y121.85936
G01 X75.42442 Y121.85936
G01 X75.49293 Y121.82512
G01 X75.52333 Y121.79472
G01 X75.55760 Y121.72617
G01 X75.55760 Y121.52353
G01 X75.52333 Y121.45497
G01 X75.47500 Y121.40458
G01 X75.46379 Y121.37755
G01 X75.46382 Y121.34829
G01 X75.47502 Y121.32124
G01 X75.49572 Y121.30056
G01 X75.52275 Y121.28936
G01 X75.55201 Y121.28939
G01 X75.57906 Y121.30059
G01 X75.59041 Y121.30991
G01 X75.64581 Y121.36671
G01 X75.70558 Y121.48858
G01 X75.70558 Y121.76112
G01 X75.64581 Y121.88299
G01 X75.59041 Y121.93978
G01 X75.57088 Y121.95385
G01 X75.45935 Y122.00734
G01 X75.20403 Y122.00935
G01 X75.17048 Y122.00145
G01 X75.06494 Y121.94760
G01 X75.00032 Y121.88299
G01 X74.94055 Y121.76112
G01 X74.93855 Y121.50580
G01 X74.94055 Y121.48858
G01 X74.95579 Y121.45360
G01 X74.70759 Y121.47844
G01 X74.70759 Y121.88675
G01 X74.70187 Y121.91545
G01 X74.69496 Y121.92843
G01 X74.67426 Y121.94913
G01 X74.64724 Y121.96033
G01 X74.61795 Y121.96033
G01 X74.59092 Y121.94913
G01 X74.57022 Y121.92843
G01 X74.56331 Y121.91545
G01 X74.55760 Y121.88675
G01 X74.55760 Y121.41055
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X76.27997 Y121.18865 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X76.27997 Y121.18865
G01 X76.28414 Y121.21029
G01 X76.28096 Y121.22863
G01 X76.28515 Y121.25032
G01 X76.28198 Y121.26864
G01 X76.28668 Y121.29183
G01 X76.28396 Y121.30864
G01 X76.28929 Y121.33305
G01 X76.28696 Y121.34865
G01 X76.29295 Y121.37427
G01 X76.29214 Y121.40036
G01 X76.29694 Y121.41423
G01 X76.29613 Y121.44034
G01 X76.30095 Y121.45426
G01 X76.30014 Y121.48035
G01 X76.30560 Y121.49543
G01 X76.30398 Y121.50864
G01 X76.31124 Y121.53663
G01 X76.31114 Y121.56036
G01 X76.31800 Y121.57808
G01 X76.31812 Y121.60036
G01 X76.32501 Y121.61814
G01 X76.32513 Y121.64034
G01 X76.34086 Y121.69967
G01 X76.34114 Y121.72035
G01 X76.34970 Y121.74125
G01 X76.35013 Y121.76036
G01 X76.35958 Y121.78261
G01 X76.36014 Y121.80036
G01 X76.36958 Y121.82259
G01 X76.37014 Y121.84034
G01 X76.38056 Y121.86376
G01 X76.38114 Y121.88136
G01 X76.39234 Y121.90574
G01 X76.39653 Y121.93259
G01 X76.40525 Y121.94684
G01 X76.40954 Y121.97260
G01 X76.41825 Y121.98685
G01 X76.42254 Y122.01260
G01 X76.43214 Y122.02792
G01 X76.43654 Y122.05261
G01 X76.44614 Y122.06792
G01 X76.45053 Y122.09261
G01 X76.46204 Y122.11024
G01 X76.46654 Y122.13259
G01 X76.47804 Y122.15022
G01 X76.48254 Y122.17260
G01 X76.49516 Y122.19160
G01 X76.49953 Y122.21260
G01 X76.51218 Y122.23165
G01 X76.51655 Y122.25261
G01 X76.53136 Y122.27356
G01 X76.53555 Y122.29261
G01 X76.55038 Y122.31357
G01 X76.56008 Y122.34298
G01 X76.57045 Y122.35444
G01 X76.57454 Y122.37260
G01 X76.59262 Y122.39624
G01 X76.60207 Y122.42299
G01 X76.61353 Y122.43536
G01 X76.62308 Y122.46300
G01 X76.63672 Y122.47714
G01 X76.64609 Y122.50300
G01 X76.66080 Y122.51801
G01 X76.67007 Y122.54301
G01 X76.68592 Y122.55896
G01 X76.69514 Y122.58304
G01 X76.71195 Y122.59970
G01 X76.72107 Y122.62299
G01 X76.73900 Y122.64029
G01 X76.74807 Y122.66299
G01 X76.76600 Y122.68029
G01 X76.77507 Y122.70300
G01 X76.79633 Y122.72205
G01 X76.80507 Y122.74300
G01 X76.82633 Y122.76208
G01 X76.83506 Y122.78298
G01 X76.85754 Y122.80269
G01 X76.87355 Y122.83208
G01 X76.89092 Y122.84397
G01 X76.90654 Y122.87209
G01 X76.92511 Y122.88461
G01 X76.94055 Y122.91209
G01 X76.96138 Y122.92550
G01 X76.97654 Y122.95210
G01 X76.99849 Y122.96586
G01 X77.01355 Y122.99208
G01 X77.03659 Y123.00617
G01 X77.05155 Y123.03208
G01 X77.07789 Y123.04717
G01 X77.09254 Y123.07209
G01 X77.12000 Y123.08750
G01 X77.12709 Y123.10300
G01 X77.14365 Y123.11956
G01 X77.16420 Y123.12817
G01 X77.17855 Y123.15210
G01 X77.19803 Y123.16510
G01 X77.21032 Y123.16861
G01 X77.21708 Y123.18298
G01 X77.23364 Y123.19954
G01 X77.25841 Y123.20879
G01 X77.26509 Y123.22299
G01 X77.28165 Y123.23955
G01 X77.30946 Y123.24910
G01 X77.31606 Y123.26299
G01 X77.33263 Y123.27955
G01 X77.36356 Y123.28941
G01 X77.37006 Y123.30300
G01 X77.38663 Y123.31956
G01 X77.42066 Y123.32967
G01 X77.43456 Y123.35210
G01 X77.45404 Y123.36510
G01 X77.48066 Y123.36967
G01 X77.48708 Y123.38298
G01 X77.50364 Y123.39954
G01 X77.52528 Y123.40848
G01 X77.54464 Y123.40965
G01 X77.55107 Y123.42299
G01 X77.56763 Y123.43955
G01 X77.58927 Y123.44849
G01 X77.61266 Y123.44966
G01 X77.61909 Y123.46299
G01 X77.63565 Y123.47955
G01 X77.65729 Y123.48849
G01 X77.68566 Y123.48966
G01 X77.69955 Y123.51209
G01 X77.71904 Y123.52510
G01 X77.76564 Y123.52967
G01 X77.77954 Y123.55210
G01 X77.79902 Y123.56510
G01 X77.82198 Y123.56967
G01 X77.85264 Y123.56967
G01 X77.86653 Y123.59208
G01 X77.88602 Y123.60508
G01 X77.90898 Y123.60965
G01 X77.94865 Y123.60965
G01 X77.96255 Y123.63208
G01 X77.98203 Y123.64509
G01 X78.00499 Y123.64966
G01 X78.05866 Y123.64966
G01 X78.07255 Y123.67209
G01 X78.09203 Y123.68509
G01 X78.11500 Y123.68966
G01 X78.18665 Y123.68966
G01 X78.20054 Y123.71209
G01 X78.23128 Y123.72850
G01 X78.34565 Y123.72967
G01 X78.35955 Y123.75210
G01 X78.39028 Y123.76850
G01 X78.57964 Y123.76967
G01 X78.59353 Y123.79208
G01 X78.62427 Y123.80848
G01 X79.20400 Y123.80965
G01 X79.23732 Y123.79954
G01 X79.25388 Y123.78298
G01 X79.26031 Y123.76967
G01 X79.44966 Y123.76850
G01 X79.48040 Y123.75210
G01 X79.49429 Y123.72967
G01 X79.59698 Y123.72967
G01 X79.61992 Y123.72510
G01 X79.63940 Y123.71209
G01 X79.65330 Y123.68966
G01 X79.72498 Y123.68966
G01 X79.74791 Y123.68509
G01 X79.76739 Y123.67209
G01 X79.78129 Y123.64966
G01 X79.83498 Y123.64966
G01 X79.85792 Y123.64509
G01 X79.87740 Y123.63208
G01 X79.89129 Y123.60965
G01 X79.93099 Y123.60965
G01 X79.95393 Y123.60508
G01 X79.97341 Y123.59208
G01 X79.98731 Y123.56967
G01 X80.01799 Y123.56967
G01 X80.04093 Y123.56510
G01 X80.06041 Y123.55210
G01 X80.07430 Y123.52967
G01 X80.12094 Y123.52510
G01 X80.14042 Y123.51209
G01 X80.15431 Y123.48966
G01 X80.19394 Y123.48509
G01 X80.21342 Y123.47209
G01 X80.22731 Y123.44966
G01 X80.26193 Y123.44509
G01 X80.28141 Y123.43208
G01 X80.29531 Y123.40965
G01 X80.31466 Y123.40848
G01 X80.33630 Y123.39954
G01 X80.35286 Y123.38298
G01 X80.35929 Y123.36967
G01 X80.37468 Y123.36851
G01 X80.39632 Y123.35956
G01 X80.41288 Y123.34300
G01 X80.41931 Y123.32967
G01 X80.45332 Y123.31956
G01 X80.46988 Y123.30300
G01 X80.47638 Y123.28941
G01 X80.50732 Y123.27955
G01 X80.52388 Y123.26299
G01 X80.53049 Y123.24910
G01 X80.55832 Y123.23955
G01 X80.57488 Y123.22299
G01 X80.58156 Y123.20879
G01 X80.59592 Y123.20508
G01 X80.61540 Y123.19208
G01 X80.62962 Y123.16861
G01 X80.65230 Y123.15956
G01 X80.66886 Y123.14300
G01 X80.67575 Y123.12820
G01 X80.70541 Y123.11209
G01 X80.71997 Y123.08750
G01 X80.74740 Y123.07209
G01 X80.76206 Y123.04717
G01 X80.78840 Y123.03208
G01 X80.80336 Y123.00617
G01 X80.82640 Y122.99208
G01 X80.84146 Y122.96586
G01 X80.86340 Y122.95210
G01 X80.87857 Y122.92550
G01 X80.89939 Y122.91209
G01 X80.91484 Y122.88461
G01 X80.93341 Y122.87209
G01 X80.94903 Y122.84397
G01 X80.96640 Y122.83208
G01 X80.98240 Y122.80269
G01 X81.00488 Y122.78298
G01 X81.01362 Y122.76208
G01 X81.03488 Y122.74300
G01 X81.04362 Y122.72205
G01 X81.06488 Y122.70300
G01 X81.07394 Y122.68029
G01 X81.09188 Y122.66299
G01 X81.10094 Y122.64029
G01 X81.11888 Y122.62299
G01 X81.12799 Y122.59970
G01 X81.14486 Y122.58298
G01 X81.15406 Y122.55896
G01 X81.16988 Y122.54301
G01 X81.17915 Y122.51804
G01 X81.19388 Y122.50300
G01 X81.20325 Y122.47714
G01 X81.21687 Y122.46300
G01 X81.22642 Y122.43536
G01 X81.23788 Y122.42299
G01 X81.24732 Y122.39624
G01 X81.25987 Y122.38299
G01 X81.26950 Y122.35444
G01 X81.28540 Y122.33259
G01 X81.28956 Y122.31357
G01 X81.29886 Y122.30300
G01 X81.30856 Y122.27359
G01 X81.32342 Y122.25261
G01 X81.32779 Y122.23160
G01 X81.34041 Y122.21260
G01 X81.34478 Y122.19160
G01 X81.35741 Y122.17260
G01 X81.36190 Y122.15022
G01 X81.37341 Y122.13259
G01 X81.37791 Y122.11024
G01 X81.38941 Y122.09261
G01 X81.39381 Y122.06792
G01 X81.40341 Y122.05261
G01 X81.40780 Y122.02792
G01 X81.41740 Y122.01260
G01 X81.42169 Y121.98685
G01 X81.43041 Y121.97260
G01 X81.43470 Y121.94684
G01 X81.44341 Y121.93259
G01 X81.44760 Y121.90574
G01 X81.45880 Y121.88136
G01 X81.45939 Y121.86376
G01 X81.46980 Y121.84034
G01 X81.47036 Y121.82259
G01 X81.48982 Y121.76036
G01 X81.49025 Y121.74125
G01 X81.49881 Y121.72035
G01 X81.49909 Y121.69967
G01 X81.50681 Y121.68035
G01 X81.50709 Y121.65967
G01 X81.51481 Y121.64034
G01 X81.51494 Y121.61814
G01 X81.52182 Y121.60036
G01 X81.52195 Y121.57808
G01 X81.52881 Y121.56036
G01 X81.52871 Y121.53663
G01 X81.53480 Y121.52035
G01 X81.53434 Y121.49543
G01 X81.53981 Y121.48035
G01 X81.53899 Y121.45426
G01 X81.54499 Y121.42863
G01 X81.54301 Y121.41423
G01 X81.54897 Y121.38865
G01 X81.54699 Y121.37427
G01 X81.55299 Y121.34865
G01 X81.55065 Y121.33305
G01 X81.55598 Y121.30864
G01 X81.55329 Y121.29185
G01 X81.55799 Y121.26864
G01 X81.55482 Y121.25027
G01 X81.55898 Y121.22863
G01 X81.55581 Y121.21029
G01 X81.55997 Y121.18865
G01 X81.55629 Y121.16866
G01 X81.55997 Y121.14865
G01 X81.55540 Y121.12571
G01 X81.53330 Y121.09876
G01 X81.51166 Y121.08982
G01 X81.45499 Y121.08865
G01 X81.42190 Y120.69305
G01 X81.29109 Y120.22942
G01 X81.06274 Y119.77910
G01 X80.75802 Y119.39117
G01 X80.39360 Y119.07608
G01 X79.99599 Y118.84781
G01 X79.99599 Y117.86664
G01 X79.99142 Y117.84370
G01 X79.97842 Y117.82422
G01 X79.95893 Y117.81121
G01 X79.93600 Y117.80664
G01 X77.90400 Y117.80664
G01 X77.88104 Y117.81121
G01 X77.86155 Y117.82422
G01 X77.84855 Y117.84370
G01 X77.84398 Y117.86664
G01 X77.84398 Y118.84781
G01 X77.44634 Y119.07608
G01 X77.08193 Y119.39117
G01 X76.77720 Y119.77910
G01 X76.54886 Y120.22942
G01 X76.41805 Y120.69305
G01 X76.38493 Y121.08865
G01 X76.32828 Y121.08982
G01 X76.29755 Y121.10623
G01 X76.28114 Y121.13696
G01 X76.28366 Y121.16866
G01 X76.27997 Y121.18865
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X76.50530 Y121.08865 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X76.50530 Y121.08865
G01 X81.33462 Y121.08865
G01 X81.30483 Y120.72000
G01 X81.17719 Y120.26762
G01 X80.96462 Y119.84840
G01 X80.67509 Y119.47811
G01 X80.31954 Y119.17067
G01 X79.90623 Y118.93476
G01 X79.88756 Y118.91807
G01 X79.88121 Y118.90717
G01 X79.87598 Y118.88264
G01 X79.87598 Y117.92666
G01 X77.96399 Y117.92666
G01 X77.96399 Y118.88264
G01 X77.95876 Y118.90717
G01 X77.95241 Y118.91807
G01 X77.93372 Y118.93476
G01 X77.52041 Y119.17067
G01 X77.16486 Y119.47811
G01 X76.87532 Y119.84840
G01 X76.66275 Y120.26762
G01 X76.53512 Y120.72000
G01 X76.50530 Y121.08865
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X77.93615 Y121.84915 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X77.93615 Y121.84915
G01 X77.93999 Y121.86965
G01 X77.93631 Y121.88964
G01 X77.93999 Y121.90963
G01 X77.93631 Y121.92965
G01 X77.93999 Y121.94964
G01 X77.93631 Y121.96965
G01 X77.93999 Y121.98964
G01 X77.93631 Y122.00966
G01 X77.93999 Y122.02965
G01 X77.93631 Y122.04966
G01 X77.93999 Y122.06965
G01 X77.93631 Y122.08964
G01 X77.93999 Y122.10963
G01 X77.93631 Y122.12965
G01 X77.93999 Y122.14964
G01 X77.93631 Y122.16965
G01 X77.93999 Y122.18964
G01 X77.93631 Y122.20966
G01 X77.93999 Y122.22965
G01 X77.93631 Y122.24966
G01 X77.93999 Y122.26965
G01 X77.93631 Y122.28964
G01 X77.93999 Y122.30963
G01 X77.93631 Y122.32965
G01 X77.93999 Y122.34963
G01 X77.93631 Y122.36965
G01 X77.93999 Y122.38964
G01 X77.93631 Y122.40966
G01 X77.93999 Y122.42965
G01 X77.93631 Y122.44966
G01 X77.93999 Y122.46965
G01 X77.93631 Y122.48967
G01 X77.93999 Y122.50965
G01 X77.93631 Y122.52964
G01 X77.93999 Y122.54966
G01 X77.93631 Y122.56965
G01 X77.93999 Y122.58964
G01 X77.93631 Y122.60965
G01 X77.93999 Y122.62964
G01 X77.93631 Y122.64966
G01 X77.93999 Y122.66965
G01 X77.93631 Y122.68966
G01 X77.93999 Y122.70965
G01 X77.93631 Y122.72964
G01 X77.93999 Y122.74963
G01 X77.93631 Y122.76965
G01 X77.93999 Y122.78964
G01 X77.93631 Y122.80965
G01 X77.93999 Y122.82964
G01 X77.93631 Y122.84966
G01 X77.93999 Y122.86965
G01 X77.93631 Y122.88966
G01 X77.93999 Y122.90965
G01 X77.93631 Y122.92964
G01 X77.93999 Y122.94963
G01 X77.93631 Y122.96965
G01 X77.93999 Y122.98964
G01 X77.93631 Y123.00965
G01 X77.93999 Y123.02964
G01 X77.93631 Y123.04966
G01 X77.93999 Y123.06965
G01 X77.93631 Y123.08966
G01 X77.93999 Y123.10965
G01 X77.93631 Y123.12964
G01 X77.93999 Y123.14963
G01 X77.93631 Y123.16965
G01 X77.93999 Y123.18964
G01 X77.93631 Y123.20965
G01 X77.93999 Y123.22964
G01 X77.93631 Y123.24966
G01 X77.93999 Y123.26965
G01 X77.93631 Y123.28966
G01 X77.93999 Y123.30965
G01 X77.93631 Y123.32964
G01 X77.93918 Y123.35794
G01 X78.00194 Y123.39106
G01 X78.06392 Y123.40965
G01 X79.77600 Y123.40965
G01 X79.83800 Y123.39106
G01 X79.90077 Y123.35794
G01 X79.90364 Y123.32964
G01 X79.89996 Y123.30965
G01 X79.90364 Y123.28966
G01 X79.89996 Y123.26965
G01 X79.90364 Y123.24966
G01 X79.89996 Y123.22964
G01 X79.90364 Y123.20965
G01 X79.89996 Y123.18964
G01 X79.90364 Y123.16965
G01 X79.89996 Y123.14963
G01 X79.90364 Y123.12964
G01 X79.89996 Y123.10965
G01 X79.90364 Y123.08966
G01 X79.89996 Y123.06965
G01 X79.90364 Y123.04966
G01 X79.89996 Y123.02964
G01 X79.90364 Y123.00965
G01 X79.89996 Y122.98964
G01 X79.90364 Y122.96965
G01 X79.89996 Y122.94963
G01 X79.90364 Y122.92964
G01 X79.89996 Y122.90965
G01 X79.90364 Y122.88966
G01 X79.89996 Y122.86965
G01 X79.90364 Y122.84966
G01 X79.89996 Y122.82964
G01 X79.90364 Y122.80965
G01 X79.89996 Y122.78964
G01 X79.90364 Y122.76965
G01 X79.89996 Y122.74963
G01 X79.90364 Y122.72964
G01 X79.89996 Y122.70965
G01 X79.90364 Y122.68966
G01 X79.89996 Y122.66965
G01 X79.90364 Y122.64966
G01 X79.89996 Y122.62964
G01 X79.90364 Y122.60965
G01 X79.89996 Y122.58964
G01 X79.90364 Y122.56965
G01 X79.89996 Y122.54963
G01 X79.90364 Y122.52964
G01 X79.89996 Y122.50965
G01 X79.90364 Y122.48967
G01 X79.89996 Y122.46965
G01 X79.90364 Y122.44966
G01 X79.89996 Y122.42965
G01 X79.90364 Y122.40966
G01 X79.89996 Y122.38964
G01 X79.90364 Y122.36965
G01 X79.89996 Y122.34963
G01 X79.90364 Y122.32965
G01 X79.89996 Y122.30963
G01 X79.90364 Y122.28964
G01 X79.89996 Y122.26965
G01 X79.90364 Y122.24966
G01 X79.89996 Y122.22965
G01 X79.90364 Y122.20966
G01 X79.89996 Y122.18964
G01 X79.90364 Y122.16965
G01 X79.89996 Y122.14964
G01 X79.90364 Y122.12965
G01 X79.89996 Y122.10963
G01 X79.90364 Y122.08964
G01 X79.89996 Y122.06965
G01 X79.90364 Y122.04966
G01 X79.89996 Y122.02965
G01 X79.90364 Y122.00966
G01 X79.89996 Y121.98964
G01 X79.90364 Y121.96965
G01 X79.89996 Y121.94964
G01 X79.90364 Y121.92965
G01 X79.89996 Y121.90963
G01 X79.90364 Y121.88964
G01 X79.89996 Y121.86965
G01 X79.90379 Y121.84915
G01 X79.89996 Y121.82863
G01 X79.90364 Y121.76866
G01 X79.89996 Y121.74865
G01 X79.90364 Y121.72866
G01 X79.89996 Y121.70864
G01 X79.90364 Y121.68865
G01 X79.89996 Y121.66864
G01 X79.90364 Y121.64865
G01 X79.89996 Y121.58865
G01 X79.90364 Y121.52866
G01 X79.89996 Y121.50864
G01 X79.90364 Y121.48865
G01 X79.89996 Y121.46864
G01 X79.90364 Y121.44865
G01 X79.89996 Y121.42863
G01 X79.90364 Y121.40867
G01 X77.93631 Y121.40867
G01 X77.93999 Y121.42863
G01 X77.93631 Y121.44865
G01 X77.93999 Y121.46864
G01 X77.93631 Y121.48865
G01 X77.93999 Y121.50864
G01 X77.93631 Y121.56866
G01 X77.93999 Y121.62863
G01 X77.93631 Y121.64865
G01 X77.93999 Y121.66864
G01 X77.93631 Y121.68865
G01 X77.93999 Y121.70864
G01 X77.93631 Y121.72866
G01 X77.93999 Y121.74865
G01 X77.93631 Y121.76866
G01 X77.93999 Y121.82863
G01 X77.93615 Y121.84915
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X87.64998 Y113.61501 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X87.64998 Y113.61501
G01 X87.65115 Y134.06673
G01 X87.66755 Y134.09747
G01 X87.68704 Y134.11047
G01 X87.71000 Y134.11504
G01 X89.35998 Y134.11504
G01 X89.38447 Y134.10981
G01 X89.40471 Y134.09503
G01 X89.41713 Y134.07326
G01 X89.43834 Y133.87171
G01 X89.49178 Y133.69541
G01 X89.57863 Y133.53295
G01 X89.69549 Y133.39056
G01 X89.83788 Y133.27369
G01 X90.00037 Y133.18682
G01 X90.17662 Y133.13338
G01 X90.35998 Y133.11532
G01 X90.54332 Y133.13338
G01 X90.71959 Y133.18682
G01 X90.88205 Y133.27369
G01 X91.02444 Y133.39056
G01 X91.14131 Y133.53295
G01 X91.22815 Y133.69541
G01 X91.28159 Y133.87171
G01 X91.30235 Y134.07174
G01 X91.31223 Y134.09137
G01 X91.33836 Y134.11100
G01 X91.35998 Y134.11504
G01 X93.02167 Y134.11387
G01 X93.05241 Y134.09747
G01 X93.06541 Y134.07798
G01 X93.06998 Y134.05502
G01 X93.06881 Y113.60332
G01 X93.05241 Y113.57259
G01 X93.03292 Y113.55958
G01 X93.00999 Y113.55501
G01 X87.69829 Y113.55618
G01 X87.66755 Y113.57259
G01 X87.65455 Y113.59207
G01 X87.64998 Y113.61501
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X87.76999 Y113.67503 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X87.76999 Y113.67503
G01 X87.76999 Y133.99503
G01 X89.30560 Y133.99503
G01 X89.32178 Y133.84253
G01 X89.38317 Y133.64405
G01 X89.48211 Y133.46140
G01 X89.61480 Y133.30153
G01 X89.77609 Y133.17064
G01 X89.95988 Y133.07372
G01 X90.15899 Y133.01454
G01 X90.36582 Y132.99533
G01 X90.57248 Y133.01682
G01 X90.76008 Y133.07372
G01 X90.94380 Y133.17064
G01 X91.10514 Y133.30153
G01 X91.23783 Y133.46140
G01 X91.33676 Y133.64405
G01 X91.39818 Y133.84253
G01 X91.41436 Y133.99503
G01 X92.94997 Y133.99503
G01 X92.94997 Y113.67503
G01 X87.76999 Y113.67503
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X89.51307 Y116.38739 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X89.51307 Y116.38739
G01 X89.51507 Y115.56065
G01 X89.56854 Y115.44912
G01 X89.58264 Y115.42963
G01 X89.63938 Y115.37419
G01 X89.76125 Y115.31442
G01 X89.96902 Y115.31241
G01 X90.00253 Y115.32031
G01 X90.10809 Y115.37419
G01 X90.16488 Y115.42963
G01 X90.17893 Y115.44912
G01 X90.22655 Y115.54434
G01 X90.23445 Y115.57787
G01 X90.23445 Y116.38739
G01 X90.23306 Y116.40205
G01 X90.22186 Y116.42907
G01 X90.20115 Y116.44977
G01 X90.18812 Y116.45668
G01 X90.15950 Y116.46240
G01 X90.14484 Y116.46098
G01 X90.11777 Y116.44977
G01 X90.09712 Y116.42907
G01 X90.08591 Y116.40205
G01 X90.08449 Y115.59557
G01 X90.05025 Y115.52707
G01 X90.01980 Y115.49666
G01 X89.95129 Y115.46240
G01 X89.79623 Y115.46240
G01 X89.72772 Y115.49666
G01 X89.69729 Y115.52707
G01 X89.66306 Y115.59557
G01 X89.66163 Y116.40205
G01 X89.65043 Y116.42907
G01 X89.62971 Y116.44977
G01 X89.60270 Y116.46098
G01 X89.57337 Y116.46098
G01 X89.54639 Y116.44977
G01 X89.52569 Y116.42907
G01 X89.51878 Y116.41609
G01 X89.51307 Y116.38739
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X90.51373 Y115.73062 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X90.51373 Y115.73062
G01 X90.51528 Y115.70246
G01 X90.52721 Y115.67688
G01 X90.53656 Y115.66621
G01 X90.56031 Y115.65105
G01 X90.57395 Y115.64706
G01 X90.98927 Y115.64574
G01 X90.99069 Y115.37276
G01 X91.00189 Y115.34574
G01 X91.02256 Y115.32504
G01 X91.04962 Y115.31384
G01 X91.06427 Y115.31241
G01 X91.07888 Y115.31384
G01 X91.10593 Y115.32504
G01 X91.12663 Y115.34574
G01 X91.13780 Y115.37276
G01 X91.13925 Y115.64574
G01 X91.22173 Y115.64716
G01 X91.24878 Y115.65836
G01 X91.26948 Y115.67906
G01 X91.27639 Y115.69204
G01 X91.28208 Y115.72072
G01 X91.28063 Y115.73537
G01 X91.26948 Y115.76240
G01 X91.24878 Y115.78310
G01 X91.23577 Y115.79001
G01 X91.20712 Y115.79572
G01 X91.13925 Y115.79572
G01 X91.13780 Y116.06872
G01 X91.12663 Y116.09575
G01 X91.11728 Y116.10710
G01 X91.10593 Y116.11645
G01 X91.07888 Y116.12765
G01 X91.04962 Y116.12765
G01 X91.02256 Y116.11645
G01 X91.00189 Y116.09575
G01 X90.99069 Y116.06872
G01 X90.98927 Y115.79572
G01 X90.69211 Y115.79572
G01 X90.90054 Y116.42564
G01 X90.89844 Y116.45483
G01 X90.89320 Y116.46857
G01 X90.87527 Y116.49168
G01 X90.84984 Y116.50619
G01 X90.83549 Y116.50944
G01 X90.80628 Y116.50736
G01 X90.78015 Y116.49427
G01 X90.76094 Y116.47218
G01 X90.75495 Y116.45874
G01 X90.51373 Y115.73062
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X97.47160 Y120.58284 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X97.47160 Y120.58284
G01 X97.47361 Y120.32752
G01 X97.53337 Y120.20567
G01 X97.58882 Y120.14888
G01 X97.61315 Y120.13262
G01 X97.64186 Y120.12691
G01 X97.65649 Y120.12833
G01 X97.68351 Y120.13953
G01 X97.70421 Y120.16023
G01 X97.71541 Y120.18726
G01 X97.71684 Y120.20189
G01 X97.71541 Y120.21654
G01 X97.70421 Y120.24357
G01 X97.65585 Y120.29396
G01 X97.62159 Y120.36247
G01 X97.62159 Y120.56513
G01 X97.65585 Y120.63364
G01 X97.68628 Y120.66407
G01 X97.75478 Y120.69833
G01 X97.82014 Y120.69833
G01 X97.93464 Y120.66015
G01 X98.50492 Y120.09191
G01 X98.53195 Y120.08070
G01 X98.56123 Y120.08070
G01 X98.58826 Y120.09191
G01 X98.60896 Y120.11261
G01 X98.61587 Y120.12559
G01 X98.62158 Y120.15426
G01 X98.62158 Y120.77331
G01 X98.62016 Y120.78797
G01 X98.60896 Y120.81499
G01 X98.58826 Y120.83569
G01 X98.57528 Y120.84260
G01 X98.54660 Y120.84832
G01 X98.53195 Y120.84689
G01 X98.50492 Y120.83569
G01 X98.48422 Y120.81499
G01 X98.47302 Y120.78797
G01 X98.47160 Y120.33534
G01 X98.02819 Y120.77872
G01 X97.99888 Y120.79686
G01 X97.85603 Y120.84448
G01 X97.83233 Y120.84832
G01 X97.71983 Y120.84631
G01 X97.59799 Y120.78654
G01 X97.53337 Y120.72193
G01 X97.47952 Y120.61639
G01 X97.47160 Y120.58284
G01 X97.47160 Y119.24949
G01 X97.47302 Y119.23486
G01 X97.48422 Y119.20783
G01 X97.50492 Y119.18713
G01 X97.51790 Y119.18022
G01 X97.54661 Y119.17451
G01 X98.54660 Y119.17451
G01 X98.57528 Y119.18022
G01 X98.59961 Y119.19648
G01 X98.61587 Y119.22081
G01 X98.62158 Y119.24949
G01 X98.62016 Y119.26414
G01 X98.60896 Y119.29117
G01 X98.58826 Y119.31187
G01 X98.56123 Y119.32307
G01 X98.14539 Y119.32449
G01 X98.14539 Y119.63046
G01 X98.13749 Y119.66402
G01 X98.08364 Y119.76955
G01 X98.02819 Y119.82635
G01 X98.00871 Y119.84042
G01 X97.89715 Y119.89394
G01 X97.71983 Y119.89394
G01 X97.60830 Y119.84039
G01 X97.58882 Y119.82635
G01 X97.53337 Y119.76955
G01 X97.47361 Y119.64771
G01 X97.47302 Y118.75868
G01 X97.47302 Y118.78797
G01 X97.48422 Y118.81500
G01 X97.50492 Y118.83570
G01 X97.53195 Y118.84690
G01 X97.54661 Y118.84832
G01 X98.26088 Y118.84832
G01 X98.28458 Y118.84449
G01 X98.42745 Y118.79686
G01 X98.45679 Y118.77873
G01 X98.55201 Y118.68348
G01 X98.57012 Y118.65416
G01 X98.62062 Y118.49963
G01 X98.62158 Y118.39237
G01 X98.61587 Y118.36369
G01 X98.60896 Y118.35071
G01 X98.58826 Y118.33001
G01 X98.56123 Y118.31881
G01 X98.53195 Y118.31881
G01 X98.50492 Y118.33001
G01 X98.49357 Y118.33936
G01 X98.48422 Y118.35071
G01 X98.47302 Y118.37774
G01 X98.47160 Y118.47542
G01 X98.43342 Y118.58995
G01 X98.36322 Y118.66016
G01 X98.24869 Y118.69833
G01 X97.53195 Y118.69976
G01 X97.50492 Y118.71096
G01 X97.48422 Y118.73166
G01 X97.47302 Y118.75868
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X97.62159 Y119.32449 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X97.62159 Y119.32449
G01 X97.62159 Y119.61276
G01 X97.65585 Y119.68126
G01 X97.68628 Y119.71169
G01 X97.75478 Y119.74596
G01 X97.86220 Y119.74596
G01 X97.93073 Y119.71169
G01 X97.96116 Y119.68129
G01 X97.99540 Y119.61279
G01 X97.99540 Y119.32449
G01 X97.62159 Y119.32449
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X102.46199 Y113.82466 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X102.46199 Y113.82466
G01 X102.46199 Y124.37264
G01 X105.89797 Y124.37264
G01 X105.89797 Y113.82466
G01 X102.46199 Y113.82466
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X102.34197 Y113.76464 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X102.34197 Y113.76464
G01 X102.34197 Y124.43264
G01 X102.34655 Y124.45560
G01 X102.36864 Y124.48255
G01 X102.40199 Y124.49266
G01 X105.95799 Y124.49266
G01 X105.98093 Y124.48809
G01 X106.00788 Y124.46599
G01 X106.01799 Y124.43264
G01 X106.01799 Y113.76464
G01 X106.01342 Y113.74170
G01 X105.99132 Y113.71475
G01 X105.95799 Y113.70464
G01 X102.40199 Y113.70464
G01 X102.37903 Y113.70922
G01 X102.35208 Y113.73131
G01 X102.34197 Y113.76464
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X80.46028 Y90.69455 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X80.46028 Y90.69455
G01 X80.47996 Y90.89458
G01 X80.47996 Y91.23565
G01 X80.49007 Y91.26900
G01 X80.50663 Y91.28559
G01 X80.51908 Y91.29173
G01 X80.51997 Y91.30075
G01 X80.52114 Y91.67634
G01 X80.53755 Y91.70708
G01 X80.55997 Y91.72097
G01 X80.56114 Y91.97040
G01 X80.57008 Y91.99201
G01 X80.58984 Y92.01025
G01 X80.59998 Y92.11312
G01 X80.60115 Y92.20837
G01 X80.61169 Y92.23194
G01 X80.62820 Y92.38774
G01 X80.67996 Y92.55843
G01 X80.68113 Y92.59635
G01 X80.69007 Y92.61800
G01 X80.70188 Y92.63064
G01 X80.71997 Y92.69031
G01 X80.72114 Y92.76234
G01 X80.73008 Y92.78398
G01 X80.75472 Y92.80486
G01 X80.75997 Y92.82221
G01 X80.76114 Y92.91535
G01 X80.77755 Y92.94609
G01 X80.79998 Y92.95998
G01 X80.80115 Y93.05836
G01 X80.81756 Y93.08909
G01 X80.83996 Y93.10298
G01 X80.83996 Y93.18063
G01 X80.84453 Y93.20359
G01 X80.85754 Y93.22307
G01 X80.87996 Y93.23697
G01 X80.87996 Y93.30664
G01 X80.88454 Y93.32960
G01 X80.89754 Y93.34908
G01 X80.91898 Y93.36267
G01 X80.91898 Y93.42765
G01 X80.92355 Y93.45061
G01 X80.93655 Y93.47009
G01 X80.95896 Y93.48398
G01 X80.95896 Y93.54263
G01 X80.96353 Y93.56559
G01 X80.97653 Y93.58507
G01 X80.99520 Y93.59765
G01 X81.00353 Y93.67461
G01 X81.01654 Y93.69409
G01 X81.02695 Y93.70225
G01 X81.03897 Y93.74192
G01 X81.04354 Y93.78060
G01 X81.05665 Y93.80016
G01 X81.12322 Y94.01568
G01 X81.23897 Y94.23224
G01 X81.24354 Y94.25561
G01 X81.26594 Y94.28271
G01 X81.27897 Y94.30710
G01 X81.28354 Y94.34161
G01 X81.29655 Y94.36110
G01 X81.31430 Y94.37319
G01 X81.31898 Y94.38192
G01 X81.32355 Y94.42561
G01 X81.33655 Y94.44509
G01 X81.35896 Y94.45899
G01 X81.36353 Y94.50661
G01 X81.37653 Y94.52609
G01 X81.39896 Y94.53999
G01 X81.40353 Y94.58660
G01 X81.41654 Y94.60608
G01 X81.43897 Y94.61997
G01 X81.44354 Y94.66361
G01 X81.45654 Y94.68309
G01 X81.47897 Y94.69699
G01 X81.48014 Y94.72835
G01 X81.48908 Y94.74999
G01 X81.50564 Y94.76656
G01 X81.51898 Y94.77298
G01 X81.52015 Y94.80234
G01 X81.52909 Y94.82399
G01 X81.54565 Y94.84055
G01 X81.55896 Y94.84697
G01 X81.56012 Y94.87435
G01 X81.56907 Y94.89599
G01 X81.58563 Y94.91255
G01 X81.59896 Y94.91898
G01 X81.60013 Y94.94535
G01 X81.60907 Y94.96699
G01 X81.62563 Y94.98355
G01 X81.63897 Y94.98997
G01 X81.64013 Y95.01436
G01 X81.64908 Y95.03600
G01 X81.66564 Y95.05256
G01 X81.67897 Y95.05899
G01 X81.68014 Y95.08136
G01 X81.68908 Y95.10300
G01 X81.71626 Y95.12518
G01 X81.72015 Y95.14834
G01 X81.72909 Y95.16998
G01 X81.75042 Y95.18908
G01 X81.76907 Y95.23498
G01 X81.78238 Y95.24885
G01 X81.92632 Y95.51573
G01 X82.12279 Y95.75515
G01 X82.12908 Y95.76800
G01 X82.16023 Y95.80077
G01 X82.16906 Y95.82200
G01 X82.19957 Y95.84867
G01 X82.20907 Y95.87600
G01 X82.22563 Y95.89256
G01 X82.23942 Y95.89914
G01 X82.24907 Y95.92800
G01 X82.26564 Y95.94456
G01 X82.27943 Y95.95114
G01 X82.28908 Y95.97999
G01 X82.30564 Y95.99655
G01 X82.31953 Y96.00315
G01 X82.32908 Y96.03099
G01 X82.34565 Y96.04755
G01 X82.35962 Y96.05418
G01 X82.36906 Y96.08098
G01 X82.38562 Y96.09754
G01 X82.39962 Y96.10417
G01 X82.40353 Y96.12060
G01 X82.41654 Y96.14009
G01 X82.43983 Y96.15423
G01 X82.44907 Y96.17900
G01 X82.46563 Y96.19556
G01 X82.47983 Y96.20224
G01 X82.48354 Y96.21662
G01 X82.49655 Y96.23610
G01 X82.51984 Y96.25025
G01 X82.52355 Y96.26460
G01 X82.53655 Y96.28408
G01 X82.56002 Y96.29830
G01 X82.56906 Y96.32098
G01 X82.58562 Y96.33755
G01 X82.60003 Y96.34430
G01 X82.60907 Y96.36698
G01 X82.62563 Y96.38355
G01 X82.64013 Y96.39033
G01 X82.65654 Y96.42109
G01 X82.68014 Y96.43534
G01 X82.69655 Y96.46610
G01 X82.71722 Y96.47946
G01 X82.73655 Y96.51009
G01 X82.75070 Y96.52025
G01 X83.00665 Y96.83028
G01 X83.32807 Y97.09408
G01 X83.33655 Y97.10508
G01 X83.36601 Y97.12523
G01 X83.37656 Y97.14008
G01 X83.40391 Y97.15631
G01 X83.41653 Y97.17509
G01 X83.44346 Y97.19035
G01 X83.45654 Y97.21009
G01 X83.48346 Y97.22535
G01 X83.49654 Y97.24509
G01 X83.52403 Y97.26053
G01 X83.53655 Y97.27910
G01 X83.56467 Y97.29472
G01 X83.57655 Y97.31209
G01 X83.60465 Y97.32771
G01 X83.62563 Y97.35256
G01 X83.64465 Y97.36071
G01 X83.66563 Y97.38555
G01 X83.68529 Y97.39391
G01 X83.69654 Y97.41009
G01 X83.72530 Y97.42591
G01 X83.73655 Y97.44209
G01 X83.76530 Y97.45791
G01 X83.77655 Y97.47409
G01 X83.80594 Y97.49010
G01 X83.82563 Y97.51255
G01 X83.84592 Y97.52108
G01 X83.86563 Y97.54356
G01 X83.88633 Y97.55222
G01 X83.90564 Y97.57356
G01 X83.92085 Y97.58057
G01 X84.32268 Y97.90884
G01 X84.81465 Y98.17181
G01 X84.83601 Y98.18710
G01 X84.85232 Y98.19192
G01 X84.86563 Y98.20455
G01 X84.89238 Y98.21400
G01 X84.90564 Y98.22654
G01 X84.93236 Y98.23599
G01 X84.94564 Y98.24857
G01 X84.97239 Y98.25801
G01 X84.98565 Y98.27056
G01 X85.01237 Y98.28001
G01 X85.03601 Y98.29810
G01 X85.05326 Y98.30211
G01 X85.06563 Y98.31356
G01 X85.09329 Y98.32311
G01 X85.11602 Y98.34008
G01 X85.13327 Y98.34409
G01 X85.15603 Y98.36109
G01 X85.17327 Y98.36510
G01 X85.19603 Y98.38209
G01 X85.21419 Y98.38618
G01 X85.23604 Y98.40208
G01 X85.25288 Y98.40605
G01 X85.27602 Y98.42210
G01 X85.28973 Y98.42576
G01 X85.82382 Y98.70991
G01 X86.50408 Y98.91626
G01 X86.52727 Y98.92649
G01 X86.54239 Y98.92786
G01 X86.56728 Y98.93950
G01 X86.58290 Y98.94028
G01 X86.60728 Y98.95149
G01 X86.62280 Y98.95227
G01 X86.64729 Y98.96350
G01 X86.66253 Y98.96431
G01 X86.68727 Y98.97549
G01 X86.70215 Y98.97633
G01 X86.72727 Y98.98750
G01 X86.74185 Y98.98839
G01 X87.45242 Y99.20272
G01 X89.14586 Y99.36835
G01 X90.83905 Y99.20043
G01 X92.46699 Y98.70541
G01 X93.96703 Y97.90231
G01 X95.28164 Y96.82197
G01 X96.36017 Y95.50595
G01 X97.16124 Y94.00481
G01 X97.65405 Y92.37621
G01 X97.81968 Y90.68277
G01 X97.65176 Y88.98958
G01 X97.15674 Y87.36169
G01 X96.35364 Y85.86157
G01 X95.27331 Y84.54699
G01 X93.95723 Y83.46846
G01 X92.45609 Y82.66739
G01 X90.82754 Y82.17458
G01 X89.13410 Y82.00895
G01 X87.44089 Y82.17687
G01 X86.74172 Y82.38893
G01 X86.72727 Y82.38982
G01 X86.70210 Y82.40095
G01 X86.68727 Y82.40181
G01 X86.66240 Y82.41301
G01 X86.64729 Y82.41382
G01 X86.62275 Y82.42503
G01 X86.60728 Y82.42581
G01 X86.58287 Y82.43704
G01 X86.55603 Y82.44123
G01 X86.54246 Y82.44938
G01 X86.51602 Y82.45421
G01 X86.50408 Y82.46102
G01 X85.81297 Y82.67189
G01 X85.28968 Y82.95157
G01 X85.27602 Y82.95523
G01 X85.25285 Y82.97125
G01 X85.23604 Y82.97522
G01 X85.21417 Y82.99114
G01 X85.18564 Y83.00077
G01 X85.17330 Y83.01220
G01 X85.14564 Y83.02175
G01 X85.13327 Y83.03320
G01 X85.10563 Y83.04275
G01 X85.09327 Y83.05421
G01 X85.06563 Y83.06376
G01 X85.05326 Y83.07522
G01 X85.02562 Y83.08477
G01 X85.01237 Y83.09731
G01 X84.98565 Y83.10676
G01 X84.97239 Y83.11931
G01 X84.95603 Y83.12322
G01 X84.93238 Y83.14131
G01 X84.90564 Y83.15075
G01 X84.89238 Y83.16330
G01 X84.86563 Y83.17275
G01 X84.85235 Y83.18532
G01 X84.82563 Y83.19576
G01 X84.81473 Y83.20544
G01 X84.31290 Y83.47499
G01 X83.92078 Y83.79678
G01 X83.90564 Y83.80376
G01 X83.88626 Y83.82512
G01 X83.86563 Y83.83376
G01 X83.84595 Y83.85619
G01 X83.82563 Y83.86475
G01 X83.80592 Y83.88723
G01 X83.77655 Y83.90323
G01 X83.76530 Y83.91941
G01 X83.73655 Y83.93523
G01 X83.72532 Y83.95139
G01 X83.69654 Y83.96721
G01 X83.68529 Y83.98339
G01 X83.65654 Y83.99922
G01 X83.64465 Y84.01662
G01 X83.62563 Y84.02477
G01 X83.60465 Y84.04961
G01 X83.57655 Y84.06523
G01 X83.56467 Y84.08260
G01 X83.53655 Y84.09823
G01 X83.52403 Y84.11679
G01 X83.49654 Y84.13224
G01 X83.48346 Y84.15195
G01 X83.45654 Y84.16721
G01 X83.44346 Y84.18695
G01 X83.41653 Y84.20221
G01 X83.40391 Y84.22098
G01 X83.37656 Y84.23721
G01 X83.36601 Y84.25207
G01 X83.33655 Y84.27222
G01 X83.32817 Y84.28306
G01 X82.99835 Y84.55532
G01 X82.75065 Y84.85710
G01 X82.73655 Y84.86724
G01 X82.71720 Y84.89787
G01 X82.69655 Y84.91123
G01 X82.68014 Y84.94196
G01 X82.65654 Y84.95621
G01 X82.64013 Y84.98697
G01 X82.62563 Y84.99375
G01 X82.60907 Y85.01031
G01 X82.60003 Y85.03300
G01 X82.58562 Y85.03975
G01 X82.56906 Y85.05631
G01 X82.56002 Y85.07900
G01 X82.54564 Y85.08575
G01 X82.52908 Y85.10231
G01 X82.51984 Y85.12708
G01 X82.50564 Y85.13376
G01 X82.48908 Y85.15032
G01 X82.47983 Y85.17508
G01 X82.46563 Y85.18176
G01 X82.44907 Y85.19833
G01 X82.43983 Y85.22306
G01 X82.42563 Y85.22974
G01 X82.40907 Y85.24631
G01 X82.39962 Y85.27313
G01 X82.37653 Y85.28723
G01 X82.36353 Y85.30671
G01 X82.35962 Y85.32312
G01 X82.34565 Y85.32974
G01 X82.32908 Y85.34631
G01 X82.31953 Y85.37414
G01 X82.30564 Y85.38075
G01 X82.28908 Y85.39731
G01 X82.27943 Y85.42619
G01 X82.26564 Y85.43277
G01 X82.24907 Y85.44933
G01 X82.23942 Y85.47818
G01 X82.22563 Y85.48476
G01 X82.20907 Y85.50132
G01 X82.19957 Y85.52863
G01 X82.16906 Y85.55532
G01 X82.16025 Y85.57653
G01 X82.12908 Y85.60932
G01 X82.12281 Y85.62215
G01 X81.91979 Y85.87135
G01 X81.78238 Y86.12845
G01 X81.76907 Y86.14232
G01 X81.75042 Y86.18821
G01 X81.72909 Y86.20731
G01 X81.72015 Y86.22896
G01 X81.71623 Y86.25215
G01 X81.68908 Y86.27432
G01 X81.68014 Y86.29596
G01 X81.67897 Y86.31834
G01 X81.66564 Y86.32476
G01 X81.64908 Y86.34133
G01 X81.64013 Y86.36297
G01 X81.63897 Y86.38732
G01 X81.62563 Y86.39375
G01 X81.60907 Y86.41031
G01 X81.60013 Y86.43195
G01 X81.59896 Y86.45834
G01 X81.58563 Y86.46477
G01 X81.56907 Y86.48133
G01 X81.56012 Y86.50297
G01 X81.55896 Y86.53033
G01 X81.54565 Y86.53675
G01 X81.52909 Y86.55331
G01 X81.52015 Y86.57495
G01 X81.51898 Y86.60434
G01 X81.49655 Y86.61824
G01 X81.48354 Y86.63772
G01 X81.47897 Y86.68034
G01 X81.45654 Y86.69423
G01 X81.44354 Y86.71371
G01 X81.43897 Y86.75733
G01 X81.41654 Y86.77122
G01 X81.40353 Y86.79070
G01 X81.39896 Y86.83734
G01 X81.37653 Y86.85123
G01 X81.36353 Y86.87071
G01 X81.35896 Y86.91834
G01 X81.33655 Y86.93223
G01 X81.32355 Y86.95171
G01 X81.31898 Y86.99540
G01 X81.31430 Y87.00414
G01 X81.29655 Y87.01623
G01 X81.28354 Y87.03571
G01 X81.27897 Y87.07023
G01 X81.26594 Y87.09461
G01 X81.24354 Y87.12171
G01 X81.23897 Y87.14508
G01 X81.11872 Y87.37254
G01 X81.05665 Y87.57716
G01 X81.04354 Y87.59669
G01 X81.03897 Y87.63543
G01 X81.02695 Y87.67508
G01 X81.01654 Y87.68323
G01 X81.00353 Y87.70274
G01 X80.99523 Y87.77965
G01 X80.97653 Y87.79222
G01 X80.96353 Y87.81171
G01 X80.95896 Y87.83464
G01 X80.95896 Y87.89337
G01 X80.93655 Y87.90726
G01 X80.92355 Y87.92674
G01 X80.91898 Y87.94968
G01 X80.91898 Y88.01463
G01 X80.89754 Y88.02822
G01 X80.88454 Y88.04770
G01 X80.87996 Y88.07063
G01 X80.87996 Y88.14033
G01 X80.85754 Y88.15422
G01 X80.84113 Y88.18498
G01 X80.83996 Y88.27434
G01 X80.81756 Y88.28829
G01 X80.80115 Y88.31897
G01 X80.79998 Y88.41734
G01 X80.77755 Y88.43129
G01 X80.76114 Y88.46197
G01 X80.75997 Y88.55511
G01 X80.75472 Y88.57244
G01 X80.73008 Y88.59331
G01 X80.72114 Y88.61496
G01 X80.71997 Y88.68699
G01 X80.70186 Y88.74670
G01 X80.69007 Y88.75933
G01 X80.68113 Y88.78097
G01 X80.67996 Y88.81887
G01 X80.62591 Y89.00111
G01 X80.61169 Y89.14538
G01 X80.60115 Y89.16895
G01 X80.59998 Y89.26426
G01 X80.58987 Y89.36705
G01 X80.57008 Y89.38531
G01 X80.56114 Y89.40695
G01 X80.55997 Y89.65633
G01 X80.54664 Y89.66276
G01 X80.53008 Y89.67937
G01 X80.51997 Y89.71264
G01 X80.51997 Y90.07657
G01 X80.51908 Y90.08559
G01 X80.50663 Y90.09176
G01 X80.49007 Y90.10835
G01 X80.47996 Y90.14165
G01 X80.47996 Y90.48274
G01 X80.46028 Y90.69455
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X83.99898 Y89.30497 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X83.99898 Y89.30497
G01 X84.01900 Y89.30865
G01 X84.07897 Y89.30497
G01 X84.09898 Y89.30865
G01 X84.11897 Y89.30497
G01 X84.13899 Y89.30865
G01 X84.15898 Y89.30497
G01 X84.17899 Y89.30865
G01 X84.19898 Y89.30497
G01 X84.21900 Y89.30865
G01 X84.27897 Y89.30497
G01 X84.29898 Y89.30865
G01 X84.31897 Y89.30497
G01 X84.33899 Y89.30865
G01 X84.35898 Y89.30497
G01 X84.37899 Y89.30865
G01 X84.39898 Y89.30497
G01 X84.41900 Y89.30865
G01 X84.47897 Y89.30497
G01 X84.49898 Y89.30865
G01 X84.51897 Y89.30497
G01 X84.53899 Y89.30865
G01 X84.55898 Y89.30497
G01 X84.57899 Y89.30865
G01 X84.59898 Y89.30497
G01 X84.61900 Y89.30865
G01 X84.67897 Y89.30497
G01 X84.69898 Y89.30865
G01 X84.71897 Y89.30497
G01 X84.73899 Y89.30865
G01 X84.75898 Y89.30497
G01 X84.77899 Y89.30865
G01 X84.79898 Y89.30497
G01 X84.81900 Y89.30865
G01 X84.87897 Y89.30497
G01 X84.89898 Y89.30865
G01 X84.91897 Y89.30497
G01 X84.93899 Y89.30865
G01 X84.95898 Y89.30497
G01 X84.97899 Y89.30865
G01 X84.99898 Y89.30497
G01 X85.01900 Y89.30865
G01 X85.07896 Y89.30497
G01 X85.09898 Y89.30865
G01 X85.11897 Y89.30497
G01 X85.13898 Y89.30865
G01 X85.15897 Y89.30497
G01 X85.17899 Y89.30865
G01 X85.19898 Y89.30497
G01 X85.21899 Y89.30865
G01 X85.23898 Y89.30497
G01 X85.25900 Y89.30865
G01 X85.31897 Y89.30497
G01 X85.33898 Y89.30865
G01 X85.35897 Y89.30497
G01 X85.37899 Y89.30865
G01 X85.39898 Y89.30497
G01 X85.41899 Y89.30865
G01 X85.43898 Y89.30497
G01 X85.45900 Y89.30865
G01 X85.51897 Y89.30497
G01 X85.53898 Y89.30865
G01 X85.55897 Y89.30497
G01 X85.57899 Y89.30865
G01 X85.59898 Y89.30497
G01 X85.61899 Y89.30865
G01 X85.63898 Y89.30497
G01 X85.65900 Y89.30865
G01 X85.71897 Y89.30497
G01 X85.73898 Y89.30865
G01 X85.75897 Y89.30497
G01 X85.77899 Y89.30865
G01 X85.79898 Y89.30497
G01 X85.81899 Y89.30865
G01 X85.83898 Y89.30497
G01 X85.85900 Y89.30865
G01 X85.91897 Y89.30497
G01 X85.93898 Y89.30865
G01 X85.95897 Y89.30497
G01 X85.97899 Y89.30865
G01 X85.99898 Y89.30497
G01 X86.01899 Y89.30865
G01 X86.03898 Y89.30497
G01 X86.05900 Y89.30865
G01 X86.11897 Y89.30497
G01 X86.13898 Y89.30865
G01 X86.15897 Y89.30497
G01 X86.17899 Y89.30865
G01 X86.19898 Y89.30497
G01 X86.21899 Y89.30865
G01 X86.23898 Y89.30497
G01 X86.25900 Y89.30865
G01 X86.31897 Y89.30497
G01 X86.33898 Y89.30865
G01 X86.35897 Y89.30497
G01 X86.37899 Y89.30865
G01 X86.39898 Y89.30497
G01 X86.41899 Y89.30865
G01 X86.43898 Y89.30497
G01 X86.45900 Y89.30865
G01 X86.51897 Y89.30497
G01 X86.53898 Y89.30865
G01 X86.55897 Y89.30497
G01 X86.57899 Y89.30865
G01 X86.59898 Y89.30497
G01 X86.61899 Y89.30865
G01 X86.63898 Y89.30497
G01 X86.65900 Y89.30865
G01 X86.71897 Y89.30497
G01 X86.77899 Y89.30865
G01 X86.79898 Y89.30497
G01 X86.79898 Y92.07233
G01 X86.77899 Y92.06869
G01 X86.75897 Y92.07233
G01 X86.73898 Y92.06869
G01 X86.71897 Y92.07233
G01 X86.69898 Y92.06869
G01 X86.63898 Y92.07233
G01 X86.61899 Y92.06869
G01 X86.59898 Y92.07233
G01 X86.57899 Y92.06869
G01 X86.55897 Y92.07233
G01 X86.53898 Y92.06869
G01 X86.51897 Y92.07233
G01 X86.49898 Y92.06869
G01 X86.43898 Y92.07233
G01 X86.41899 Y92.06869
G01 X86.39898 Y92.07233
G01 X86.37899 Y92.06869
G01 X86.35897 Y92.07233
G01 X86.33898 Y92.06869
G01 X86.31897 Y92.07233
G01 X86.29898 Y92.06869
G01 X86.23898 Y92.07233
G01 X86.21899 Y92.06869
G01 X86.19898 Y92.07233
G01 X86.17899 Y92.06869
G01 X86.15897 Y92.07233
G01 X86.13898 Y92.06869
G01 X86.11897 Y92.07233
G01 X86.09898 Y92.06869
G01 X86.03898 Y92.07233
G01 X86.01899 Y92.06869
G01 X85.99898 Y92.07233
G01 X85.97899 Y92.06869
G01 X85.95897 Y92.07233
G01 X85.93898 Y92.06869
G01 X85.91897 Y92.07233
G01 X85.89898 Y92.06869
G01 X85.83898 Y92.07233
G01 X85.81899 Y92.06869
G01 X85.79898 Y92.07233
G01 X85.77899 Y92.06869
G01 X85.75897 Y92.07233
G01 X85.73898 Y92.06869
G01 X85.71897 Y92.07233
G01 X85.69898 Y92.06869
G01 X85.63898 Y92.07233
G01 X85.61899 Y92.06869
G01 X85.59898 Y92.07233
G01 X85.57899 Y92.06869
G01 X85.55897 Y92.07233
G01 X85.53898 Y92.06869
G01 X85.51897 Y92.07233
G01 X85.49898 Y92.06869
G01 X85.43898 Y92.07233
G01 X85.41899 Y92.06869
G01 X85.39898 Y92.07233
G01 X85.37899 Y92.06869
G01 X85.35897 Y92.07233
G01 X85.33898 Y92.06869
G01 X85.31897 Y92.07233
G01 X85.29898 Y92.06869
G01 X85.23898 Y92.07233
G01 X85.21899 Y92.06869
G01 X85.19898 Y92.07233
G01 X85.17899 Y92.06869
G01 X85.15897 Y92.07233
G01 X85.13898 Y92.06869
G01 X85.11897 Y92.07233
G01 X85.09898 Y92.06869
G01 X85.07896 Y92.07233
G01 X85.05898 Y92.06869
G01 X84.99898 Y92.07233
G01 X84.97899 Y92.06869
G01 X84.95898 Y92.07233
G01 X84.93899 Y92.06869
G01 X84.91897 Y92.07233
G01 X84.89898 Y92.06869
G01 X84.87897 Y92.07233
G01 X84.85898 Y92.06869
G01 X84.79898 Y92.07233
G01 X84.77899 Y92.06869
G01 X84.75898 Y92.07233
G01 X84.73899 Y92.06869
G01 X84.71897 Y92.07233
G01 X84.69898 Y92.06869
G01 X84.67897 Y92.07233
G01 X84.65898 Y92.06869
G01 X84.59898 Y92.07233
G01 X84.57899 Y92.06869
G01 X84.55898 Y92.07233
G01 X84.53899 Y92.06869
G01 X84.51897 Y92.07233
G01 X84.49898 Y92.06869
G01 X84.47897 Y92.07233
G01 X84.45898 Y92.06869
G01 X84.39898 Y92.07233
G01 X84.37899 Y92.06869
G01 X84.35898 Y92.07233
G01 X84.33899 Y92.06869
G01 X84.31897 Y92.07233
G01 X84.29898 Y92.06869
G01 X84.27897 Y92.07233
G01 X84.25898 Y92.06869
G01 X84.19898 Y92.07233
G01 X84.17899 Y92.06869
G01 X84.15898 Y92.07233
G01 X84.13899 Y92.06869
G01 X84.11897 Y92.07233
G01 X84.09898 Y92.06869
G01 X84.07897 Y92.07233
G01 X84.01900 Y92.06869
G01 X83.99898 Y92.07233
G01 X83.99898 Y89.30497
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X89.19999 Y82.13486 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X89.19999 Y82.13486
G01 X90.80989 Y82.29343
G01 X92.41563 Y82.78050
G01 X93.89548 Y83.57151
G01 X95.19261 Y84.63602
G01 X96.25712 Y85.93312
G01 X97.04813 Y87.41303
G01 X97.53520 Y89.01876
G01 X97.69969 Y90.68866
G01 X97.53520 Y92.35856
G01 X97.04813 Y93.96432
G01 X96.25712 Y95.44418
G01 X95.19261 Y96.74128
G01 X93.89548 Y97.80579
G01 X92.41563 Y98.59680
G01 X90.80989 Y99.08387
G01 X89.19999 Y99.24244
G01 X89.19999 Y82.13486
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X96.60444 Y85.85365 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X96.60444 Y85.85365
G01 X96.60902 Y85.87661
G01 X96.62202 Y85.89609
G01 X96.64150 Y85.90909
G01 X96.66446 Y85.91367
G01 X97.45443 Y85.91367
G01 X97.45443 Y86.70363
G01 X97.45900 Y86.72659
G01 X97.47201 Y86.74607
G01 X97.49149 Y86.75908
G01 X97.51445 Y86.76365
G01 X97.53739 Y86.75908
G01 X97.55687 Y86.74607
G01 X97.56987 Y86.72659
G01 X97.57444 Y86.70363
G01 X97.57444 Y85.91367
G01 X98.36446 Y85.91367
G01 X98.38740 Y85.90909
G01 X98.40688 Y85.89609
G01 X98.41988 Y85.87661
G01 X98.42445 Y85.85365
G01 X98.41988 Y85.83071
G01 X98.40688 Y85.81123
G01 X98.38740 Y85.79822
G01 X98.36446 Y85.79365
G01 X97.57444 Y85.79365
G01 X97.57444 Y85.00363
G01 X97.56987 Y84.98070
G01 X97.55687 Y84.96122
G01 X97.53739 Y84.94821
G01 X97.51445 Y84.94364
G01 X97.49149 Y84.94821
G01 X97.47201 Y84.96122
G01 X97.45900 Y84.98070
G01 X97.45443 Y85.00363
G01 X97.45443 Y85.79365
G01 X96.66446 Y85.79365
G01 X96.64150 Y85.79822
G01 X96.62202 Y85.81123
G01 X96.60902 Y85.83071
G01 X96.60444 Y85.85365
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X99.64927 Y95.87745 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X99.64927 Y95.87745
G01 X99.70479 Y96.10145
G01 X99.75864 Y96.20704
G01 X99.86171 Y96.31146
G01 X99.89103 Y96.32957
G01 X100.04556 Y96.38007
G01 X100.16486 Y96.38007
G01 X100.31940 Y96.32957
G01 X100.34871 Y96.31143
G01 X100.39633 Y96.26381
G01 X100.41259 Y96.23948
G01 X100.41830 Y96.21077
G01 X100.41259 Y96.18210
G01 X100.40568 Y96.16912
G01 X100.38498 Y96.14842
G01 X100.35795 Y96.13722
G01 X100.32867 Y96.13722
G01 X100.30164 Y96.14842
G01 X100.25516 Y96.19287
G01 X100.14066 Y96.23104
G01 X100.06977 Y96.23104
G01 X99.95524 Y96.19287
G01 X99.88112 Y96.11875
G01 X99.84266 Y96.04176
G01 X99.79926 Y95.86823
G01 X99.79926 Y95.74385
G01 X99.84266 Y95.57031
G01 X99.88112 Y95.49333
G01 X99.95524 Y95.41921
G01 X100.06977 Y95.38103
G01 X100.14066 Y95.38103
G01 X100.25519 Y95.41921
G01 X100.30167 Y95.46363
G01 X100.31462 Y95.47057
G01 X100.34332 Y95.47626
G01 X100.37203 Y95.47054
G01 X100.39636 Y95.45429
G01 X100.40568 Y95.44291
G01 X100.41688 Y95.41588
G01 X100.41686 Y95.38662
G01 X100.40565 Y95.35957
G01 X100.34871 Y95.30062
G01 X100.31940 Y95.28251
G01 X100.16486 Y95.23201
G01 X100.04556 Y95.23201
G01 X99.87530 Y95.28987
G01 X99.75864 Y95.40504
G01 X99.69913 Y95.52594
G01 X99.65150 Y95.71641
G01 X99.64927 Y95.87745
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X100.64985 Y96.02970 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X100.64985 Y96.02970
G01 X100.65910 Y96.05746
G01 X100.67827 Y96.07956
G01 X100.77507 Y96.12957
G01 X100.85645 Y96.21098
G01 X100.95691 Y96.35903
G01 X100.98124 Y96.37532
G01 X101.00995 Y96.38103
G01 X101.03865 Y96.37534
G01 X101.06301 Y96.35908
G01 X101.07926 Y96.33475
G01 X101.08498 Y96.30602
G01 X101.08498 Y95.38103
G01 X101.29570 Y95.38103
G01 X101.31033 Y95.37961
G01 X101.33735 Y95.36841
G01 X101.35805 Y95.34771
G01 X101.36496 Y95.33473
G01 X101.37068 Y95.30603
G01 X101.36925 Y95.29140
G01 X101.35805 Y95.26437
G01 X101.34871 Y95.25302
G01 X101.33735 Y95.24367
G01 X101.31033 Y95.23247
G01 X100.72427 Y95.23105
G01 X100.70962 Y95.23247
G01 X100.68259 Y95.24367
G01 X100.66189 Y95.26437
G01 X100.65069 Y95.29140
G01 X100.65069 Y95.32068
G01 X100.66189 Y95.34771
G01 X100.68259 Y95.36841
G01 X100.69557 Y95.37532
G01 X100.72427 Y95.38103
G01 X100.93499 Y95.38103
G01 X100.93499 Y96.07737
G01 X100.86336 Y96.00709
G01 X100.75780 Y95.95322
G01 X100.72958 Y95.94550
G01 X100.71487 Y95.94590
G01 X100.68711 Y95.95515
G01 X100.66501 Y95.97433
G01 X100.65193 Y96.00051
G01 X100.64985 Y96.02970
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X111.83997 Y89.45003 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X111.83997 Y89.45003
G01 X111.83997 Y94.63001
G01 X132.15997 Y94.63001
G01 X132.15997 Y93.09440
G01 X132.00747 Y93.07822
G01 X131.80900 Y93.01683
G01 X131.62634 Y92.91789
G01 X131.46648 Y92.78520
G01 X131.33559 Y92.62389
G01 X131.23869 Y92.44012
G01 X131.17948 Y92.24106
G01 X131.16028 Y92.03415
G01 X131.17948 Y91.83905
G01 X131.23869 Y91.63994
G01 X131.33559 Y91.45617
G01 X131.46648 Y91.29486
G01 X131.62634 Y91.16219
G01 X131.80900 Y91.06324
G01 X132.00747 Y91.00184
G01 X132.15997 Y90.98564
G01 X132.15997 Y89.45003
G01 X111.83997 Y89.45003
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X116.69412 Y84.71740 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X116.69412 Y84.71740
G01 X116.69412 Y84.74669
G01 X116.70532 Y84.77371
G01 X116.72602 Y84.79441
G01 X116.75304 Y84.80562
G01 X116.85076 Y84.80704
G01 X116.96526 Y84.84519
G01 X117.03547 Y84.91539
G01 X117.07364 Y85.02992
G01 X117.07507 Y85.74669
G01 X117.08627 Y85.77371
G01 X117.10697 Y85.79441
G01 X117.13399 Y85.80561
G01 X117.14865 Y85.80704
G01 X117.17733 Y85.80132
G01 X117.19031 Y85.79441
G01 X117.21101 Y85.77371
G01 X117.22221 Y85.74669
G01 X117.22363 Y85.73203
G01 X117.22363 Y85.01773
G01 X117.21979 Y84.99403
G01 X117.17217 Y84.85118
G01 X117.15406 Y84.82187
G01 X117.05883 Y84.72662
G01 X117.02950 Y84.70849
G01 X116.87494 Y84.65802
G01 X116.76770 Y84.65705
G01 X116.73900 Y84.66277
G01 X116.72602 Y84.66967
G01 X116.70532 Y84.69038
G01 X116.69412 Y84.71740
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X117.54984 Y84.73203 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X117.54984 Y84.73203
G01 X117.54984 Y85.73203
G01 X117.55556 Y85.76073
G01 X117.56247 Y85.77371
G01 X117.58317 Y85.79441
G01 X117.61019 Y85.80561
G01 X117.62485 Y85.80704
G01 X118.02302 Y85.80503
G01 X118.14486 Y85.74526
G01 X118.20166 Y85.68981
G01 X118.21570 Y85.67033
G01 X118.26925 Y85.55880
G01 X118.26925 Y85.38146
G01 X118.21570 Y85.26993
G01 X118.20166 Y85.25045
G01 X118.14486 Y85.19500
G01 X118.03933 Y85.14115
G01 X118.00580 Y85.13322
G01 X117.69983 Y85.13322
G01 X117.69841 Y84.71740
G01 X117.68721 Y84.69038
G01 X117.66650 Y84.66967
G01 X117.63948 Y84.65847
G01 X117.62485 Y84.65705
G01 X117.59615 Y84.66277
G01 X117.57181 Y84.67902
G01 X117.55556 Y84.70336
G01 X117.54984 Y84.73203
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X118.50222 Y84.73203 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X118.50222 Y84.73203
G01 X118.50793 Y84.76073
G01 X118.51484 Y84.77371
G01 X118.53554 Y84.79441
G01 X118.56257 Y84.80562
G01 X118.78794 Y84.80704
G01 X118.78794 Y85.50335
G01 X118.71631 Y85.43310
G01 X118.61075 Y85.37922
G01 X118.58253 Y85.37150
G01 X118.56782 Y85.37191
G01 X118.54006 Y85.38115
G01 X118.51796 Y85.40033
G01 X118.51011 Y85.41278
G01 X118.50239 Y85.44100
G01 X118.50605 Y85.47003
G01 X118.51205 Y85.48347
G01 X118.53122 Y85.50556
G01 X118.62802 Y85.55558
G01 X118.70940 Y85.63696
G01 X118.80986 Y85.78501
G01 X118.83417 Y85.80132
G01 X118.86290 Y85.80704
G01 X118.87753 Y85.80561
G01 X118.90458 Y85.79441
G01 X118.92528 Y85.77374
G01 X118.93221 Y85.76076
G01 X118.93793 Y85.73203
G01 X118.93793 Y84.80704
G01 X119.14865 Y84.80704
G01 X119.17732 Y84.80132
G01 X119.19030 Y84.79441
G01 X119.21100 Y84.77371
G01 X119.22220 Y84.74669
G01 X119.22220 Y84.71740
G01 X119.21100 Y84.69038
G01 X119.19030 Y84.66967
G01 X119.16328 Y84.65847
G01 X119.14865 Y84.65705
G01 X118.56257 Y84.65847
G01 X118.53554 Y84.66967
G01 X118.51484 Y84.69038
G01 X118.50364 Y84.71740
G01 X118.50222 Y84.73203
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X117.69983 Y85.28321 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X117.69983 Y85.28321
G01 X117.98807 Y85.28321
G01 X118.05657 Y85.31748
G01 X118.08700 Y85.34791
G01 X118.12127 Y85.41641
G01 X118.12127 Y85.52385
G01 X118.08700 Y85.59236
G01 X118.05657 Y85.62278
G01 X117.98807 Y85.65705
G01 X117.69983 Y85.65705
G01 X117.69983 Y85.28321
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X119.23760 Y91.27817 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X119.23760 Y91.27817
G01 X119.23902 Y91.29285
G01 X119.25022 Y91.31983
G01 X119.27092 Y91.34053
G01 X119.29795 Y91.35175
G01 X120.10442 Y91.35315
G01 X120.17293 Y91.38737
G01 X120.20330 Y91.41779
G01 X120.23759 Y91.48637
G01 X120.23759 Y91.64137
G01 X120.20333 Y91.70989
G01 X120.17293 Y91.74030
G01 X120.10440 Y91.77456
G01 X119.29795 Y91.77599
G01 X119.27092 Y91.78721
G01 X119.25022 Y91.80789
G01 X119.23902 Y91.83491
G01 X119.23760 Y91.84954
G01 X119.24331 Y91.87825
G01 X119.25022 Y91.89123
G01 X119.27092 Y91.91198
G01 X119.29795 Y91.92313
G01 X119.31260 Y91.92455
G01 X120.12213 Y91.92455
G01 X120.15565 Y91.91665
G01 X120.25090 Y91.86903
G01 X120.27041 Y91.85500
G01 X120.32581 Y91.79818
G01 X120.37966 Y91.69262
G01 X120.38758 Y91.65907
G01 X120.38557 Y91.45140
G01 X120.32581 Y91.32955
G01 X120.27044 Y91.27273
G01 X120.25088 Y91.25864
G01 X120.13932 Y91.20522
G01 X119.31260 Y91.20316
G01 X119.28390 Y91.20893
G01 X119.27092 Y91.21579
G01 X119.25022 Y91.23651
G01 X119.23902 Y91.26351
G01 X119.23760 Y91.27817
G01 X119.23902 Y92.57842
G01 X119.23904 Y92.54914
G01 X119.24331 Y92.53506
G01 X119.25962 Y92.51073
G01 X119.40765 Y92.41032
G01 X119.48906 Y92.32892
G01 X119.53907 Y92.23217
G01 X119.56117 Y92.21297
G01 X119.57460 Y92.20700
G01 X119.60364 Y92.20331
G01 X119.61814 Y92.20580
G01 X119.64430 Y92.21889
G01 X119.66348 Y92.24098
G01 X119.67272 Y92.26877
G01 X119.67313 Y92.28345
G01 X119.66538 Y92.31167
G01 X119.61153 Y92.41721
G01 X119.54128 Y92.48884
G01 X120.23759 Y92.48884
G01 X120.23902 Y92.26349
G01 X120.25022 Y92.23646
G01 X120.27092 Y92.21576
G01 X120.28390 Y92.20885
G01 X120.31260 Y92.20314
G01 X120.32723 Y92.20458
G01 X120.35426 Y92.21576
G01 X120.36561 Y92.22511
G01 X120.37496 Y92.23646
G01 X120.38616 Y92.26349
G01 X120.38616 Y92.86420
G01 X120.37496 Y92.89122
G01 X120.35426 Y92.91192
G01 X120.32723 Y92.92313
G01 X120.29794 Y92.92313
G01 X120.27092 Y92.91192
G01 X120.25022 Y92.89122
G01 X120.24331 Y92.87824
G01 X120.23759 Y92.84954
G01 X120.23759 Y92.63882
G01 X119.31260 Y92.63882
G01 X119.28387 Y92.63311
G01 X119.25954 Y92.61685
G01 X119.25022 Y92.60547
G01 X119.23902 Y92.57842
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X111.71996 Y94.69000 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X111.71996 Y94.69000
G01 X111.72453 Y94.71296
G01 X111.73753 Y94.73244
G01 X111.76827 Y94.74885
G01 X132.21999 Y94.75002
G01 X132.24293 Y94.74545
G01 X132.26241 Y94.73244
G01 X132.27882 Y94.70171
G01 X132.27999 Y93.04002
G01 X132.27476 Y93.01553
G01 X132.25997 Y92.99529
G01 X132.23820 Y92.98287
G01 X132.03666 Y92.96166
G01 X131.86035 Y92.90822
G01 X131.69790 Y92.82137
G01 X131.55550 Y92.70451
G01 X131.43864 Y92.56212
G01 X131.35180 Y92.39963
G01 X131.29833 Y92.22336
G01 X131.28027 Y92.04002
G01 X131.29833 Y91.85671
G01 X131.35180 Y91.68043
G01 X131.43864 Y91.51800
G01 X131.55550 Y91.37555
G01 X131.69790 Y91.25871
G01 X131.86035 Y91.17185
G01 X132.03666 Y91.11838
G01 X132.23668 Y91.09765
G01 X132.25632 Y91.08777
G01 X132.27595 Y91.06164
G01 X132.27999 Y91.04002
G01 X132.27999 Y89.39001
G01 X132.27542 Y89.36707
G01 X132.26241 Y89.34759
G01 X132.23168 Y89.33124
G01 X111.77998 Y89.33002
G01 X111.75702 Y89.33461
G01 X111.73753 Y89.34759
G01 X111.72113 Y89.37835
G01 X111.71996 Y94.69000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X116.19798 Y102.37264 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X116.19798 Y102.37264
G01 X116.19798 Y104.40464
G01 X116.20255 Y104.42760
G01 X116.22465 Y104.45455
G01 X116.25800 Y104.46466
G01 X117.23915 Y104.46466
G01 X117.46739 Y104.86229
G01 X117.78248 Y105.22671
G01 X118.17042 Y105.53143
G01 X118.62073 Y105.75978
G01 X119.08438 Y105.89059
G01 X119.47996 Y105.92368
G01 X119.47996 Y105.96864
G01 X119.48453 Y105.99160
G01 X119.49754 Y106.01108
G01 X119.52827 Y106.02749
G01 X119.55997 Y106.02498
G01 X119.57999 Y106.02866
G01 X119.60160 Y106.02450
G01 X119.61999 Y106.02767
G01 X119.64166 Y106.02348
G01 X119.66000 Y106.02666
G01 X119.68316 Y106.02196
G01 X119.71166 Y106.02351
G01 X119.72439 Y106.01931
G01 X119.73998 Y106.02165
G01 X119.76556 Y106.01568
G01 X119.77999 Y106.01766
G01 X119.80559 Y106.01167
G01 X119.81999 Y106.01365
G01 X119.84557 Y106.00768
G01 X119.87168 Y106.00849
G01 X119.88677 Y106.00303
G01 X119.91166 Y106.00349
G01 X119.92794 Y105.99739
G01 X119.95167 Y105.99750
G01 X119.96945 Y105.99061
G01 X120.03168 Y105.98350
G01 X120.05101 Y105.97578
G01 X120.07168 Y105.97550
G01 X120.09101 Y105.96778
G01 X120.11166 Y105.96750
G01 X120.13257 Y105.95894
G01 X120.15167 Y105.95851
G01 X120.17392 Y105.94906
G01 X120.19167 Y105.94850
G01 X120.21392 Y105.93905
G01 X120.23168 Y105.93849
G01 X120.25509 Y105.92808
G01 X120.27267 Y105.92749
G01 X120.29706 Y105.91629
G01 X120.32393 Y105.91210
G01 X120.33818 Y105.90339
G01 X120.36393 Y105.89910
G01 X120.37818 Y105.89038
G01 X120.40391 Y105.88609
G01 X120.41923 Y105.87649
G01 X120.44392 Y105.87210
G01 X120.45923 Y105.86250
G01 X120.48392 Y105.85810
G01 X120.50155 Y105.84659
G01 X120.52393 Y105.84210
G01 X120.54156 Y105.83059
G01 X120.56393 Y105.82610
G01 X120.58298 Y105.81345
G01 X120.60391 Y105.80908
G01 X120.62291 Y105.79645
G01 X120.64392 Y105.79209
G01 X120.66487 Y105.77728
G01 X120.68392 Y105.77309
G01 X120.70488 Y105.75828
G01 X120.72393 Y105.75409
G01 X120.74577 Y105.73819
G01 X120.76393 Y105.73410
G01 X120.78758 Y105.71601
G01 X120.80391 Y105.71210
G01 X120.82667 Y105.69511
G01 X120.85431 Y105.68556
G01 X120.86845 Y105.67192
G01 X120.89431 Y105.66255
G01 X120.90935 Y105.64781
G01 X120.93432 Y105.63854
G01 X120.95024 Y105.62274
G01 X120.97440 Y105.61350
G01 X120.99106 Y105.59668
G01 X121.01430 Y105.58757
G01 X121.03160 Y105.56963
G01 X121.05431 Y105.56057
G01 X121.07160 Y105.54263
G01 X121.09431 Y105.53357
G01 X121.11339 Y105.51228
G01 X121.13432 Y105.50354
G01 X121.15337 Y105.48228
G01 X121.17432 Y105.47354
G01 X121.19401 Y105.45109
G01 X121.21430 Y105.44256
G01 X121.23528 Y105.41772
G01 X121.26340 Y105.40209
G01 X121.27592 Y105.38353
G01 X121.30340 Y105.36808
G01 X121.31681 Y105.34726
G01 X121.34341 Y105.33209
G01 X121.35715 Y105.31015
G01 X121.38341 Y105.29508
G01 X121.39751 Y105.27205
G01 X121.42339 Y105.25709
G01 X121.43848 Y105.23075
G01 X121.45430 Y105.22356
G01 X121.47087 Y105.20700
G01 X121.47882 Y105.18863
G01 X121.50340 Y105.17408
G01 X121.51948 Y105.14444
G01 X121.54341 Y105.13009
G01 X121.55641 Y105.11060
G01 X121.55992 Y105.09831
G01 X121.58341 Y105.08409
G01 X121.59642 Y105.06460
G01 X121.60013 Y105.05023
G01 X121.61432 Y105.04355
G01 X121.63089 Y105.02699
G01 X121.64044 Y104.99912
G01 X121.65430 Y104.99255
G01 X121.67087 Y104.97598
G01 X121.68072 Y104.94505
G01 X121.69431 Y104.93854
G01 X121.71087 Y104.92198
G01 X121.72098 Y104.88797
G01 X121.73431 Y104.88155
G01 X121.75088 Y104.86499
G01 X121.75982 Y104.84335
G01 X121.76098 Y104.82798
G01 X121.77432 Y104.82155
G01 X121.79088 Y104.80499
G01 X121.79982 Y104.78335
G01 X121.80099 Y104.76397
G01 X121.82342 Y104.75008
G01 X121.83642 Y104.73059
G01 X121.84099 Y104.69597
G01 X121.86340 Y104.68208
G01 X121.87640 Y104.66260
G01 X121.88097 Y104.62297
G01 X121.90340 Y104.60908
G01 X121.91641 Y104.58960
G01 X121.92098 Y104.54299
G01 X121.94341 Y104.52910
G01 X121.95641 Y104.50961
G01 X121.96098 Y104.48665
G01 X121.96098 Y104.45597
G01 X121.98341 Y104.44208
G01 X121.99982 Y104.41134
G01 X122.00099 Y104.35998
G01 X122.02342 Y104.34609
G01 X122.03642 Y104.32661
G01 X122.04099 Y104.30365
G01 X122.04099 Y104.24998
G01 X122.06340 Y104.23608
G01 X122.07640 Y104.21660
G01 X122.08097 Y104.19364
G01 X122.08097 Y104.12199
G01 X122.10340 Y104.10809
G01 X122.11981 Y104.07736
G01 X122.12098 Y103.96298
G01 X122.14341 Y103.94909
G01 X122.15982 Y103.91835
G01 X122.16098 Y103.72897
G01 X122.18341 Y103.71508
G01 X122.19982 Y103.68434
G01 X122.19982 Y103.09296
G01 X122.18341 Y103.06222
G01 X122.16098 Y103.04833
G01 X122.15982 Y102.85897
G01 X122.14341 Y102.82824
G01 X122.12098 Y102.81434
G01 X122.11981 Y102.69997
G01 X122.10340 Y102.66923
G01 X122.08097 Y102.65534
G01 X122.07981 Y102.57195
G01 X122.06340 Y102.54122
G01 X122.04099 Y102.52732
G01 X122.04099 Y102.47365
G01 X122.03642 Y102.45072
G01 X122.02342 Y102.43123
G01 X122.00099 Y102.41734
G01 X122.00099 Y102.37764
G01 X121.99642 Y102.35470
G01 X121.98341 Y102.33522
G01 X121.96098 Y102.32133
G01 X121.96098 Y102.29065
G01 X121.95641 Y102.26771
G01 X121.94341 Y102.24823
G01 X121.92098 Y102.23433
G01 X121.91641 Y102.18770
G01 X121.90340 Y102.16822
G01 X121.88097 Y102.15432
G01 X121.87981 Y102.12595
G01 X121.87086 Y102.10431
G01 X121.85430 Y102.08775
G01 X121.84099 Y102.08132
G01 X121.83642 Y102.04670
G01 X121.82342 Y102.02722
G01 X121.80099 Y102.01333
G01 X121.79642 Y101.98270
G01 X121.78341 Y101.96321
G01 X121.76098 Y101.94932
G01 X121.75982 Y101.93395
G01 X121.75088 Y101.91231
G01 X121.73431 Y101.89575
G01 X121.72098 Y101.88933
G01 X121.71087 Y101.85531
G01 X121.69431 Y101.83875
G01 X121.68072 Y101.83225
G01 X121.67087 Y101.80131
G01 X121.65430 Y101.78475
G01 X121.64044 Y101.77818
G01 X121.63089 Y101.75031
G01 X121.61432 Y101.73375
G01 X121.60013 Y101.72707
G01 X121.59088 Y101.70231
G01 X121.57432 Y101.68574
G01 X121.55992 Y101.67899
G01 X121.55641 Y101.66669
G01 X121.54341 Y101.64721
G01 X121.51948 Y101.63286
G01 X121.50340 Y101.60322
G01 X121.47882 Y101.58867
G01 X121.46340 Y101.56123
G01 X121.43848 Y101.54658
G01 X121.42339 Y101.52021
G01 X121.39751 Y101.50525
G01 X121.38341 Y101.48221
G01 X121.35715 Y101.46715
G01 X121.34341 Y101.44523
G01 X121.31681 Y101.43007
G01 X121.30340 Y101.40921
G01 X121.27592 Y101.39377
G01 X121.26340 Y101.37523
G01 X121.23528 Y101.35961
G01 X121.22339 Y101.34223
G01 X121.19403 Y101.32623
G01 X121.17432 Y101.30375
G01 X121.15337 Y101.29502
G01 X121.13432 Y101.27376
G01 X121.11336 Y101.26502
G01 X121.09431 Y101.24376
G01 X121.07160 Y101.23469
G01 X121.05431 Y101.21676
G01 X121.03160 Y101.20769
G01 X121.01430 Y101.18976
G01 X120.99106 Y101.18064
G01 X120.97440 Y101.16380
G01 X120.95024 Y101.15455
G01 X120.93432 Y101.13876
G01 X120.90935 Y101.12948
G01 X120.89431 Y101.11475
G01 X120.86845 Y101.10538
G01 X120.85431 Y101.09177
G01 X120.82667 Y101.08222
G01 X120.81430 Y101.07076
G01 X120.78758 Y101.06131
G01 X120.77432 Y101.04876
G01 X120.74580 Y101.03914
G01 X120.72393 Y101.02321
G01 X120.70488 Y101.01902
G01 X120.68392 Y101.00421
G01 X120.66487 Y101.00002
G01 X120.64392 Y100.98521
G01 X120.62291 Y100.98084
G01 X120.60391 Y100.96822
G01 X120.58293 Y100.96385
G01 X120.56393 Y100.95123
G01 X120.54156 Y100.94673
G01 X120.52393 Y100.93523
G01 X120.50155 Y100.93073
G01 X120.48392 Y100.91922
G01 X120.45923 Y100.91483
G01 X120.44392 Y100.90523
G01 X120.41923 Y100.90083
G01 X120.40391 Y100.89123
G01 X120.37818 Y100.88694
G01 X120.36393 Y100.87823
G01 X120.33818 Y100.87394
G01 X120.32393 Y100.86522
G01 X120.29708 Y100.86103
G01 X120.27267 Y100.84981
G01 X120.25509 Y100.84922
G01 X120.23168 Y100.83881
G01 X120.21387 Y100.83825
G01 X120.19167 Y100.82882
G01 X120.17392 Y100.82827
G01 X120.15167 Y100.81882
G01 X120.13257 Y100.81839
G01 X120.11166 Y100.80983
G01 X120.09101 Y100.80955
G01 X120.03168 Y100.79382
G01 X120.00945 Y100.79370
G01 X119.99167 Y100.78681
G01 X119.96940 Y100.78669
G01 X119.95167 Y100.77983
G01 X119.92797 Y100.77990
G01 X119.91166 Y100.77381
G01 X119.88677 Y100.77427
G01 X119.87168 Y100.76880
G01 X119.84557 Y100.76962
G01 X119.83168 Y100.76482
G01 X119.80557 Y100.76563
G01 X119.79167 Y100.76083
G01 X119.76559 Y100.76164
G01 X119.73998 Y100.75565
G01 X119.72436 Y100.75798
G01 X119.69998 Y100.75265
G01 X119.68319 Y100.75534
G01 X119.66000 Y100.75064
G01 X119.64161 Y100.75382
G01 X119.61999 Y100.74965
G01 X119.60165 Y100.75283
G01 X119.57999 Y100.74864
G01 X119.55997 Y100.75232
G01 X119.52827 Y100.74981
G01 X119.49754 Y100.76621
G01 X119.48453 Y100.78570
G01 X119.47996 Y100.80863
G01 X119.47996 Y100.85362
G01 X119.08438 Y100.88674
G01 X118.62073 Y101.01755
G01 X118.17042 Y101.24589
G01 X117.78248 Y101.55062
G01 X117.46739 Y101.91500
G01 X117.23915 Y102.31264
G01 X116.25800 Y102.31264
G01 X116.23504 Y102.31721
G01 X116.20809 Y102.33931
G01 X116.19798 Y102.37264
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X116.31799 Y102.43266 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X116.31799 Y102.43266
G01 X116.31799 Y104.34464
G01 X117.27400 Y104.34464
G01 X117.29851 Y104.34987
G01 X117.30941 Y104.35622
G01 X117.32609 Y104.37492
G01 X117.56198 Y104.78823
G01 X117.86943 Y105.14378
G01 X118.23971 Y105.43331
G01 X118.65893 Y105.64588
G01 X119.11133 Y105.77352
G01 X119.47996 Y105.80331
G01 X119.47996 Y100.97401
G01 X119.11133 Y101.00381
G01 X118.65893 Y101.13144
G01 X118.23971 Y101.34401
G01 X117.86943 Y101.63355
G01 X117.56198 Y101.98907
G01 X117.32609 Y102.40238
G01 X117.30941 Y102.42107
G01 X117.29851 Y102.42742
G01 X117.27400 Y102.43266
G01 X116.31799 Y102.43266
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X115.69397 Y105.93265 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X115.69397 Y105.93265
G01 X115.69854 Y105.95561
G01 X115.71154 Y105.97509
G01 X115.74228 Y105.99150
G01 X115.94398 Y105.99267
G01 X115.94515 Y106.19435
G01 X115.96155 Y106.22508
G01 X115.98104 Y106.23808
G01 X116.00400 Y106.24266
G01 X116.02693 Y106.23808
G01 X116.04642 Y106.22508
G01 X116.06282 Y106.19435
G01 X116.06399 Y105.99267
G01 X116.26567 Y105.99150
G01 X116.29640 Y105.97509
G01 X116.30941 Y105.95561
G01 X116.31398 Y105.93265
G01 X116.30941 Y105.90971
G01 X116.29640 Y105.89023
G01 X116.26567 Y105.87382
G01 X116.06399 Y105.87265
G01 X116.06282 Y105.67095
G01 X116.04642 Y105.64022
G01 X116.02693 Y105.62721
G01 X116.00400 Y105.62264
G01 X115.98104 Y105.62721
G01 X115.96155 Y105.64022
G01 X115.94515 Y105.67095
G01 X115.94398 Y105.87265
G01 X115.74228 Y105.87382
G01 X115.71154 Y105.89023
G01 X115.69854 Y105.90971
G01 X115.69397 Y105.93265
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X116.89998 Y109.59866 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X116.89998 Y109.59866
G01 X117.55998 Y109.59866
G01 X117.55998 Y112.41864
G01 X116.89998 Y112.41864
G01 X116.89998 Y109.59866
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X115.75996 Y111.00864 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X115.75996 Y111.00864
G01 X115.76453 Y111.03160
G01 X115.77753 Y111.05108
G01 X115.79701 Y111.06408
G01 X115.81998 Y111.06866
G01 X116.77997 Y111.06866
G01 X116.77997 Y112.47864
G01 X116.78454 Y112.50160
G01 X116.79754 Y112.52108
G01 X116.82828 Y112.53749
G01 X122.27998 Y112.53866
G01 X122.30292 Y112.53408
G01 X122.32240 Y112.52108
G01 X122.33541 Y112.50160
G01 X122.33998 Y112.47864
G01 X122.33998 Y111.06866
G01 X123.30000 Y111.06866
G01 X123.32293 Y111.06408
G01 X123.34241 Y111.05108
G01 X123.35542 Y111.03160
G01 X123.35882 Y110.99695
G01 X123.34241 Y110.96622
G01 X123.32293 Y110.95321
G01 X123.30000 Y110.94864
G01 X122.33998 Y110.94864
G01 X122.33998 Y109.53864
G01 X122.33541 Y109.51570
G01 X122.32240 Y109.49622
G01 X122.29167 Y109.47981
G01 X116.83999 Y109.47864
G01 X116.81703 Y109.48321
G01 X116.79754 Y109.49622
G01 X116.78454 Y109.51570
G01 X116.77997 Y109.53864
G01 X116.77997 Y110.94864
G01 X115.81998 Y110.94864
G01 X115.79701 Y110.95321
G01 X115.77753 Y110.96622
G01 X115.76453 Y110.98570
G01 X115.75996 Y111.00864
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X114.14307 Y112.64602 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X114.14307 Y112.64602
G01 X114.14449 Y112.63139
G01 X114.15569 Y112.60437
G01 X114.17639 Y112.58367
G01 X114.20342 Y112.57246
G01 X114.23270 Y112.57246
G01 X114.25973 Y112.58367
G01 X114.28043 Y112.60437
G01 X114.28734 Y112.61735
G01 X114.29305 Y112.64602
G01 X114.29305 Y113.04353
G01 X114.35282 Y113.10327
G01 X114.72950 Y112.60104
G01 X114.75130 Y112.58151
G01 X114.76463 Y112.57528
G01 X114.79359 Y112.57114
G01 X114.82193 Y112.57841
G01 X114.84535 Y112.59596
G01 X114.86026 Y112.62116
G01 X114.86440 Y112.65011
G01 X114.85714 Y112.67846
G01 X114.45996 Y113.21041
G01 X114.84253 Y113.59301
G01 X114.85879 Y113.61734
G01 X114.86450 Y113.64602
G01 X114.86308 Y113.66068
G01 X114.85188 Y113.68770
G01 X114.83118 Y113.70840
G01 X114.80415 Y113.71960
G01 X114.77487 Y113.71960
G01 X114.74784 Y113.70840
G01 X114.29305 Y113.25565
G01 X114.29163 Y113.66068
G01 X114.28043 Y113.68770
G01 X114.25973 Y113.70840
G01 X114.24675 Y113.71531
G01 X114.21807 Y113.72103
G01 X114.20342 Y113.71960
G01 X114.17639 Y113.70840
G01 X114.15569 Y113.68770
G01 X114.14449 Y113.66068
G01 X114.14307 Y113.64602
G01 X114.14307 Y112.64602
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X118.74689 Y113.01602 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X118.74689 Y113.01602
G01 X118.74689 Y114.01602
G01 X118.75261 Y114.04472
G01 X118.75952 Y114.05770
G01 X118.78022 Y114.07840
G01 X118.80724 Y114.08961
G01 X119.06000 Y114.09103
G01 X119.08370 Y114.08719
G01 X119.24227 Y114.03220
G01 X119.35108 Y113.92621
G01 X119.36515 Y113.90673
G01 X119.41844 Y113.79613
G01 X119.46607 Y113.60566
G01 X119.46607 Y113.42641
G01 X119.41278 Y113.22060
G01 X119.35891 Y113.11503
G01 X119.25586 Y113.01064
G01 X119.22655 Y112.99250
G01 X119.07201 Y112.94201
G01 X118.82190 Y112.94104
G01 X118.79320 Y112.94676
G01 X118.78022 Y112.95367
G01 X118.75952 Y112.97437
G01 X118.74832 Y113.00139
G01 X118.74689 Y113.01602
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X118.89688 Y113.09103 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X118.89688 Y113.09103
G01 X118.89688 Y113.94104
G01 X119.04781 Y113.94104
G01 X119.16231 Y113.90287
G01 X119.23643 Y113.82875
G01 X119.27493 Y113.75176
G01 X119.31832 Y113.57823
G01 X119.31832 Y113.45384
G01 X119.27493 Y113.28031
G01 X119.23643 Y113.20332
G01 X119.16231 Y113.12921
G01 X119.04781 Y113.09103
G01 X118.89688 Y113.09103
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X119.65164 Y113.11127 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X119.65164 Y113.11127
G01 X119.65306 Y113.09664
G01 X119.66427 Y113.06962
G01 X119.73041 Y113.00282
G01 X119.85228 Y112.94305
G01 X120.17244 Y112.94305
G01 X120.28400 Y112.99657
G01 X120.30351 Y113.01064
G01 X120.35890 Y113.06743
G01 X120.41867 Y113.18928
G01 X120.41867 Y113.46184
G01 X120.36513 Y113.57338
G01 X120.35111 Y113.59286
G01 X120.29431 Y113.64831
G01 X120.17506 Y113.70713
G01 X120.41047 Y113.97825
G01 X120.41989 Y114.00510
G01 X120.42060 Y114.01937
G01 X120.41397 Y114.04704
G01 X120.39754 Y114.07023
G01 X120.38631 Y114.07909
G01 X120.35989 Y114.08968
G01 X120.34570 Y114.09103
G01 X119.72665 Y114.09103
G01 X119.69795 Y114.08531
G01 X119.67361 Y114.06906
G01 X119.66427 Y114.05770
G01 X119.65306 Y114.03068
G01 X119.65306 Y114.00139
G01 X119.66427 Y113.97437
G01 X119.67361 Y113.96301
G01 X119.68497 Y113.95367
G01 X119.71199 Y113.94246
G01 X120.18039 Y113.94104
G01 X119.95591 Y113.68448
G01 X119.94158 Y113.65989
G01 X119.93744 Y113.63175
G01 X119.94407 Y113.60408
G01 X119.95118 Y113.59172
G01 X119.96051 Y113.58089
G01 X119.98443 Y113.56548
G01 X120.01237 Y113.56009
G01 X120.13749 Y113.56009
G01 X120.20602 Y113.52583
G01 X120.23643 Y113.49542
G01 X120.27069 Y113.42689
G01 X120.27069 Y113.22423
G01 X120.23643 Y113.15570
G01 X120.20602 Y113.12529
G01 X120.13749 Y113.09103
G01 X119.88723 Y113.09103
G01 X119.81870 Y113.12529
G01 X119.76830 Y113.17366
G01 X119.74128 Y113.18486
G01 X119.71199 Y113.18486
G01 X119.68497 Y113.17366
G01 X119.66427 Y113.15296
G01 X119.65736 Y113.13998
G01 X119.65164 Y113.11127
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X117.91997 Y109.59866 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X117.91997 Y109.59866
G01 X117.91997 Y112.41864
G01 X122.21996 Y112.41864
G01 X122.21996 Y109.59866
G01 X117.91997 Y109.59866
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X118.67928 Y107.24746 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X118.67928 Y107.24746
G01 X118.68151 Y107.08644
G01 X118.72911 Y106.89597
G01 X118.78865 Y106.77504
G01 X118.90531 Y106.65985
G01 X119.07559 Y106.60202
G01 X119.19482 Y106.60202
G01 X119.34941 Y106.65249
G01 X119.37874 Y106.67062
G01 X119.42634 Y106.71825
G01 X119.44260 Y106.74258
G01 X119.44687 Y106.75665
G01 X119.44684 Y106.78591
G01 X119.43564 Y106.81296
G01 X119.42632 Y106.82432
G01 X119.40198 Y106.84057
G01 X119.37328 Y106.84626
G01 X119.35865 Y106.84481
G01 X119.33160 Y106.83361
G01 X119.28517 Y106.78919
G01 X119.17067 Y106.75104
G01 X119.09978 Y106.75104
G01 X118.98525 Y106.78919
G01 X118.91113 Y106.86333
G01 X118.87265 Y106.94032
G01 X118.82927 Y107.11385
G01 X118.82927 Y107.23824
G01 X118.87265 Y107.41177
G01 X118.91113 Y107.48873
G01 X118.98527 Y107.56287
G01 X119.09978 Y107.60105
G01 X119.17064 Y107.60105
G01 X119.28517 Y107.56287
G01 X119.33160 Y107.51845
G01 X119.35865 Y107.50725
G01 X119.38791 Y107.50722
G01 X119.40198 Y107.51149
G01 X119.42632 Y107.52774
G01 X119.44257 Y107.55208
G01 X119.44829 Y107.58078
G01 X119.44260 Y107.60948
G01 X119.42634 Y107.63381
G01 X119.37874 Y107.68144
G01 X119.34941 Y107.69958
G01 X119.19482 Y107.75007
G01 X119.07557 Y107.75007
G01 X118.92104 Y107.69958
G01 X118.89172 Y107.68144
G01 X118.78865 Y107.57702
G01 X118.73480 Y107.47148
G01 X118.67928 Y107.24746
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X119.63307 Y106.66140 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X119.63307 Y106.66140
G01 X119.63307 Y106.69069
G01 X119.64428 Y106.71771
G01 X120.21252 Y107.28799
G01 X120.25070 Y107.40250
G01 X120.25070 Y107.46785
G01 X120.21644 Y107.53636
G01 X120.18601 Y107.56678
G01 X120.11750 Y107.60105
G01 X119.91484 Y107.60105
G01 X119.84631 Y107.56678
G01 X119.79596 Y107.51845
G01 X119.76891 Y107.50725
G01 X119.75428 Y107.50580
G01 X119.72558 Y107.51149
G01 X119.71263 Y107.51842
G01 X119.69193 Y107.53910
G01 X119.68072 Y107.56615
G01 X119.68070 Y107.59541
G01 X119.68497 Y107.60948
G01 X119.70122 Y107.63381
G01 X119.75802 Y107.68926
G01 X119.87989 Y107.74903
G01 X120.13523 Y107.75104
G01 X120.16876 Y107.74311
G01 X120.27430 Y107.68926
G01 X120.33891 Y107.62465
G01 X120.39868 Y107.50280
G01 X120.40069 Y107.39030
G01 X120.39685 Y107.36661
G01 X120.34923 Y107.22376
G01 X120.33109 Y107.19445
G01 X119.88771 Y106.75104
G01 X120.34034 Y106.74962
G01 X120.36736 Y106.73841
G01 X120.38806 Y106.71771
G01 X120.39926 Y106.69069
G01 X120.40069 Y106.67603
G01 X120.39497 Y106.64735
G01 X120.38806 Y106.63438
G01 X120.36736 Y106.61367
G01 X120.34034 Y106.60247
G01 X120.32571 Y106.60105
G01 X119.70666 Y106.60105
G01 X119.67796 Y106.60677
G01 X119.66498 Y106.61367
G01 X119.64428 Y106.63438
G01 X119.63307 Y106.66140
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X119.79998 Y102.40497 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X119.79998 Y102.40497
G01 X119.81999 Y102.40865
G01 X119.83998 Y102.40497
G01 X119.86000 Y102.40865
G01 X119.87999 Y102.40497
G01 X119.89998 Y102.40865
G01 X119.91997 Y102.40497
G01 X119.93998 Y102.40865
G01 X119.95997 Y102.40497
G01 X119.97999 Y102.40865
G01 X119.99998 Y102.40497
G01 X120.01999 Y102.40865
G01 X120.03998 Y102.40497
G01 X120.06000 Y102.40865
G01 X120.11997 Y102.40497
G01 X120.13998 Y102.40865
G01 X120.15997 Y102.40497
G01 X120.21999 Y102.40865
G01 X120.24049 Y102.40482
G01 X120.26099 Y102.40865
G01 X120.28098 Y102.40497
G01 X120.30099 Y102.40865
G01 X120.32098 Y102.40497
G01 X120.34100 Y102.40865
G01 X120.36099 Y102.40497
G01 X120.38098 Y102.40865
G01 X120.40097 Y102.40497
G01 X120.42098 Y102.40865
G01 X120.44097 Y102.40497
G01 X120.46099 Y102.40865
G01 X120.48098 Y102.40497
G01 X120.50099 Y102.40865
G01 X120.52098 Y102.40497
G01 X120.54100 Y102.40865
G01 X120.56099 Y102.40497
G01 X120.58098 Y102.40865
G01 X120.60097 Y102.40497
G01 X120.62098 Y102.40865
G01 X120.64097 Y102.40497
G01 X120.66099 Y102.40865
G01 X120.68098 Y102.40497
G01 X120.70099 Y102.40865
G01 X120.72098 Y102.40497
G01 X120.74100 Y102.40865
G01 X120.76099 Y102.40497
G01 X120.78098 Y102.40865
G01 X120.80097 Y102.40497
G01 X120.82098 Y102.40865
G01 X120.84097 Y102.40497
G01 X120.86099 Y102.40865
G01 X120.88098 Y102.40497
G01 X120.90099 Y102.40865
G01 X120.92098 Y102.40497
G01 X120.94100 Y102.40865
G01 X120.96096 Y102.40497
G01 X120.98098 Y102.40865
G01 X121.00097 Y102.40497
G01 X121.02098 Y102.40865
G01 X121.04097 Y102.40497
G01 X121.06099 Y102.40865
G01 X121.08098 Y102.40497
G01 X121.10099 Y102.40865
G01 X121.12098 Y102.40497
G01 X121.14100 Y102.40865
G01 X121.16099 Y102.40497
G01 X121.18098 Y102.40865
G01 X121.20097 Y102.40497
G01 X121.22098 Y102.40865
G01 X121.24097 Y102.40497
G01 X121.26099 Y102.40865
G01 X121.28098 Y102.40497
G01 X121.30099 Y102.40865
G01 X121.32098 Y102.40497
G01 X121.34100 Y102.40865
G01 X121.36099 Y102.40497
G01 X121.38098 Y102.40865
G01 X121.40096 Y102.40497
G01 X121.42098 Y102.40865
G01 X121.44097 Y102.40497
G01 X121.46099 Y102.40865
G01 X121.48097 Y102.40497
G01 X121.50099 Y102.40865
G01 X121.52098 Y102.40497
G01 X121.54099 Y102.40865
G01 X121.56098 Y102.40497
G01 X121.58100 Y102.40865
G01 X121.60099 Y102.40497
G01 X121.62098 Y102.40865
G01 X121.64097 Y102.40497
G01 X121.66098 Y102.40865
G01 X121.68097 Y102.40497
G01 X121.70099 Y102.40865
G01 X121.72098 Y102.40497
G01 X121.74925 Y102.40784
G01 X121.78240 Y102.47060
G01 X121.80096 Y102.53253
G01 X121.80096 Y104.24477
G01 X121.78240 Y104.30669
G01 X121.74925 Y104.36946
G01 X121.72098 Y104.37233
G01 X121.70099 Y104.36864
G01 X121.68097 Y104.37233
G01 X121.66098 Y104.36864
G01 X121.64097 Y104.37233
G01 X121.62098 Y104.36864
G01 X121.60099 Y104.37233
G01 X121.58100 Y104.36864
G01 X121.56098 Y104.37233
G01 X121.54099 Y104.36864
G01 X121.52098 Y104.37233
G01 X121.50099 Y104.36864
G01 X121.48097 Y104.37233
G01 X121.46099 Y104.36864
G01 X121.44097 Y104.37233
G01 X121.42098 Y104.36864
G01 X121.40096 Y104.37233
G01 X121.38098 Y104.36864
G01 X121.36099 Y104.37233
G01 X121.34100 Y104.36864
G01 X121.32098 Y104.37233
G01 X121.30099 Y104.36864
G01 X121.28098 Y104.37233
G01 X121.26099 Y104.36864
G01 X121.24097 Y104.37233
G01 X121.22098 Y104.36864
G01 X121.20097 Y104.37233
G01 X121.18098 Y104.36864
G01 X121.16099 Y104.37233
G01 X121.14100 Y104.36864
G01 X121.12098 Y104.37233
G01 X121.10099 Y104.36864
G01 X121.08098 Y104.37233
G01 X121.06099 Y104.36864
G01 X121.04097 Y104.37233
G01 X121.02098 Y104.36864
G01 X121.00097 Y104.37233
G01 X120.98098 Y104.36864
G01 X120.96096 Y104.37233
G01 X120.94100 Y104.36864
G01 X120.92098 Y104.37233
G01 X120.90099 Y104.36864
G01 X120.88098 Y104.37233
G01 X120.86099 Y104.36864
G01 X120.84097 Y104.37233
G01 X120.82098 Y104.36864
G01 X120.80097 Y104.37233
G01 X120.78098 Y104.36864
G01 X120.76099 Y104.37233
G01 X120.74100 Y104.36864
G01 X120.72098 Y104.37233
G01 X120.70099 Y104.36864
G01 X120.68098 Y104.37233
G01 X120.66099 Y104.36864
G01 X120.64097 Y104.37233
G01 X120.62098 Y104.36864
G01 X120.60097 Y104.37233
G01 X120.58098 Y104.36864
G01 X120.56099 Y104.37233
G01 X120.54100 Y104.36864
G01 X120.52098 Y104.37233
G01 X120.50099 Y104.36864
G01 X120.48098 Y104.37233
G01 X120.46099 Y104.36864
G01 X120.44097 Y104.37233
G01 X120.42098 Y104.36864
G01 X120.40097 Y104.37233
G01 X120.38098 Y104.36864
G01 X120.36099 Y104.37233
G01 X120.34100 Y104.36864
G01 X120.32098 Y104.37233
G01 X120.30099 Y104.36864
G01 X120.28098 Y104.37233
G01 X120.26099 Y104.36864
G01 X120.24049 Y104.37248
G01 X120.21999 Y104.36864
G01 X120.19998 Y104.37233
G01 X120.17999 Y104.36864
G01 X120.15997 Y104.37233
G01 X120.13998 Y104.36864
G01 X120.11997 Y104.37233
G01 X120.09998 Y104.36864
G01 X120.03998 Y104.37233
G01 X120.01999 Y104.36864
G01 X119.99998 Y104.37233
G01 X119.97999 Y104.36864
G01 X119.95997 Y104.37233
G01 X119.89998 Y104.36864
G01 X119.87999 Y104.37233
G01 X119.86000 Y104.36864
G01 X119.83998 Y104.37233
G01 X119.81999 Y104.36864
G01 X119.79998 Y104.37233
G01 X119.79998 Y102.40497
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X123.81798 Y102.37264 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X123.81798 Y102.37264
G01 X123.81798 Y104.40464
G01 X123.82255 Y104.42760
G01 X123.84465 Y104.45455
G01 X123.87800 Y104.46466
G01 X124.85915 Y104.46466
G01 X125.08739 Y104.86229
G01 X125.40248 Y105.22671
G01 X125.79041 Y105.53143
G01 X126.24073 Y105.75978
G01 X126.70438 Y105.89059
G01 X127.09996 Y105.92368
G01 X127.09996 Y105.96864
G01 X127.10453 Y105.99160
G01 X127.11754 Y106.01108
G01 X127.14827 Y106.02749
G01 X127.17997 Y106.02498
G01 X127.19999 Y106.02866
G01 X127.22160 Y106.02450
G01 X127.23999 Y106.02767
G01 X127.26166 Y106.02348
G01 X127.28000 Y106.02666
G01 X127.30316 Y106.02196
G01 X127.33166 Y106.02351
G01 X127.34439 Y106.01931
G01 X127.35998 Y106.02165
G01 X127.38556 Y106.01568
G01 X127.39999 Y106.01766
G01 X127.42559 Y106.01167
G01 X127.43999 Y106.01365
G01 X127.46557 Y106.00768
G01 X127.49168 Y106.00849
G01 X127.50677 Y106.00303
G01 X127.53166 Y106.00349
G01 X127.54794 Y105.99739
G01 X127.57167 Y105.99750
G01 X127.58945 Y105.99061
G01 X127.65168 Y105.98350
G01 X127.67101 Y105.97578
G01 X127.69168 Y105.97550
G01 X127.71101 Y105.96778
G01 X127.73166 Y105.96750
G01 X127.75257 Y105.95894
G01 X127.77167 Y105.95851
G01 X127.79392 Y105.94906
G01 X127.81167 Y105.94850
G01 X127.83392 Y105.93905
G01 X127.85168 Y105.93849
G01 X127.87509 Y105.92808
G01 X127.89267 Y105.92749
G01 X127.91706 Y105.91629
G01 X127.94393 Y105.91210
G01 X127.95818 Y105.90339
G01 X127.98393 Y105.89910
G01 X127.99818 Y105.89038
G01 X128.02391 Y105.88609
G01 X128.03923 Y105.87649
G01 X128.06392 Y105.87210
G01 X128.07923 Y105.86250
G01 X128.10392 Y105.85810
G01 X128.12155 Y105.84659
G01 X128.14393 Y105.84210
G01 X128.16156 Y105.83059
G01 X128.18393 Y105.82610
G01 X128.20298 Y105.81345
G01 X128.22391 Y105.80908
G01 X128.24291 Y105.79645
G01 X128.26392 Y105.79209
G01 X128.28487 Y105.77728
G01 X128.30392 Y105.77309
G01 X128.32488 Y105.75828
G01 X128.34393 Y105.75409
G01 X128.36577 Y105.73819
G01 X128.38393 Y105.73410
G01 X128.40758 Y105.71601
G01 X128.42391 Y105.71210
G01 X128.44667 Y105.69511
G01 X128.47431 Y105.68556
G01 X128.48845 Y105.67192
G01 X128.51431 Y105.66255
G01 X128.52935 Y105.64781
G01 X128.55432 Y105.63854
G01 X128.57024 Y105.62274
G01 X128.59440 Y105.61350
G01 X128.61106 Y105.59668
G01 X128.63430 Y105.58757
G01 X128.65160 Y105.56963
G01 X128.67431 Y105.56057
G01 X128.69160 Y105.54263
G01 X128.71431 Y105.53357
G01 X128.73339 Y105.51228
G01 X128.75432 Y105.50354
G01 X128.77337 Y105.48228
G01 X128.79432 Y105.47354
G01 X128.81401 Y105.45109
G01 X128.83430 Y105.44256
G01 X128.85528 Y105.41772
G01 X128.88340 Y105.40209
G01 X128.89592 Y105.38353
G01 X128.92340 Y105.36808
G01 X128.93681 Y105.34726
G01 X128.96341 Y105.33209
G01 X128.97715 Y105.31015
G01 X129.00341 Y105.29508
G01 X129.01751 Y105.27205
G01 X129.04339 Y105.25709
G01 X129.05848 Y105.23075
G01 X129.07430 Y105.22356
G01 X129.09087 Y105.20700
G01 X129.09882 Y105.18863
G01 X129.12340 Y105.17408
G01 X129.13948 Y105.14444
G01 X129.16341 Y105.13009
G01 X129.17641 Y105.11060
G01 X129.17992 Y105.09831
G01 X129.20341 Y105.08409
G01 X129.21642 Y105.06460
G01 X129.22013 Y105.05023
G01 X129.23432 Y105.04355
G01 X129.25089 Y105.02699
G01 X129.26044 Y104.99912
G01 X129.27430 Y104.99255
G01 X129.29087 Y104.97598
G01 X129.30072 Y104.94505
G01 X129.31431 Y104.93854
G01 X129.33087 Y104.92198
G01 X129.34098 Y104.88797
G01 X129.35431 Y104.88155
G01 X129.37088 Y104.86499
G01 X129.37982 Y104.84335
G01 X129.38098 Y104.82798
G01 X129.39432 Y104.82155
G01 X129.41088 Y104.80499
G01 X129.41982 Y104.78335
G01 X129.42099 Y104.76397
G01 X129.44342 Y104.75008
G01 X129.45642 Y104.73059
G01 X129.46099 Y104.69597
G01 X129.48340 Y104.68208
G01 X129.49640 Y104.66260
G01 X129.50097 Y104.62297
G01 X129.52340 Y104.60908
G01 X129.53641 Y104.58960
G01 X129.54098 Y104.54299
G01 X129.56341 Y104.52910
G01 X129.57641 Y104.50961
G01 X129.58098 Y104.48665
G01 X129.58098 Y104.45597
G01 X129.60341 Y104.44208
G01 X129.61982 Y104.41134
G01 X129.62099 Y104.35998
G01 X129.64342 Y104.34609
G01 X129.65642 Y104.32661
G01 X129.66099 Y104.30365
G01 X129.66099 Y104.24998
G01 X129.68340 Y104.23608
G01 X129.69640 Y104.21660
G01 X129.70097 Y104.19364
G01 X129.70097 Y104.12199
G01 X129.72340 Y104.10809
G01 X129.73981 Y104.07736
G01 X129.74098 Y103.96298
G01 X129.76341 Y103.94909
G01 X129.77982 Y103.91835
G01 X129.78098 Y103.72897
G01 X129.80341 Y103.71508
G01 X129.81982 Y103.68434
G01 X129.81982 Y103.09296
G01 X129.80341 Y103.06222
G01 X129.78098 Y103.04833
G01 X129.77982 Y102.85897
G01 X129.76341 Y102.82824
G01 X129.74098 Y102.81434
G01 X129.73981 Y102.69997
G01 X129.72340 Y102.66923
G01 X129.70097 Y102.65534
G01 X129.69981 Y102.57195
G01 X129.68340 Y102.54122
G01 X129.66099 Y102.52732
G01 X129.66099 Y102.47365
G01 X129.65642 Y102.45072
G01 X129.64342 Y102.43123
G01 X129.62099 Y102.41734
G01 X129.62099 Y102.37764
G01 X129.61642 Y102.35470
G01 X129.60341 Y102.33522
G01 X129.58098 Y102.32133
G01 X129.58098 Y102.29065
G01 X129.57641 Y102.26771
G01 X129.56341 Y102.24823
G01 X129.54098 Y102.23433
G01 X129.53641 Y102.18770
G01 X129.52340 Y102.16822
G01 X129.50097 Y102.15432
G01 X129.49981 Y102.12595
G01 X129.49086 Y102.10431
G01 X129.47430 Y102.08775
G01 X129.46099 Y102.08132
G01 X129.45642 Y102.04670
G01 X129.44342 Y102.02722
G01 X129.42099 Y102.01333
G01 X129.41642 Y101.98270
G01 X129.40341 Y101.96321
G01 X129.38098 Y101.94932
G01 X129.37982 Y101.93395
G01 X129.37088 Y101.91231
G01 X129.35431 Y101.89575
G01 X129.34098 Y101.88933
G01 X129.33087 Y101.85531
G01 X129.31431 Y101.83875
G01 X129.30072 Y101.83225
G01 X129.29087 Y101.80131
G01 X129.27430 Y101.78475
G01 X129.26044 Y101.77818
G01 X129.25089 Y101.75031
G01 X129.23432 Y101.73375
G01 X129.22013 Y101.72707
G01 X129.21088 Y101.70231
G01 X129.19432 Y101.68574
G01 X129.17992 Y101.67899
G01 X129.17641 Y101.66669
G01 X129.16341 Y101.64721
G01 X129.13948 Y101.63286
G01 X129.12340 Y101.60322
G01 X129.09882 Y101.58867
G01 X129.08340 Y101.56123
G01 X129.05848 Y101.54658
G01 X129.04339 Y101.52021
G01 X129.01751 Y101.50525
G01 X129.00341 Y101.48221
G01 X128.97715 Y101.46715
G01 X128.96341 Y101.44523
G01 X128.93681 Y101.43007
G01 X128.92340 Y101.40921
G01 X128.89592 Y101.39377
G01 X128.88340 Y101.37523
G01 X128.85528 Y101.35961
G01 X128.84339 Y101.34223
G01 X128.81403 Y101.32623
G01 X128.79432 Y101.30375
G01 X128.77337 Y101.29502
G01 X128.75432 Y101.27376
G01 X128.73336 Y101.26502
G01 X128.71431 Y101.24376
G01 X128.69160 Y101.23469
G01 X128.67431 Y101.21676
G01 X128.65160 Y101.20769
G01 X128.63430 Y101.18976
G01 X128.61106 Y101.18064
G01 X128.59440 Y101.16380
G01 X128.57024 Y101.15455
G01 X128.55432 Y101.13876
G01 X128.52935 Y101.12948
G01 X128.51431 Y101.11475
G01 X128.48845 Y101.10538
G01 X128.47431 Y101.09177
G01 X128.44667 Y101.08222
G01 X128.43430 Y101.07076
G01 X128.40758 Y101.06131
G01 X128.39432 Y101.04876
G01 X128.36580 Y101.03914
G01 X128.34393 Y101.02321
G01 X128.32488 Y101.01902
G01 X128.30392 Y101.00421
G01 X128.28487 Y101.00002
G01 X128.26392 Y100.98521
G01 X128.24291 Y100.98084
G01 X128.22391 Y100.96822
G01 X128.20293 Y100.96385
G01 X128.18393 Y100.95123
G01 X128.16156 Y100.94673
G01 X128.14393 Y100.93523
G01 X128.12155 Y100.93073
G01 X128.10392 Y100.91922
G01 X128.07923 Y100.91483
G01 X128.06392 Y100.90523
G01 X128.03923 Y100.90083
G01 X128.02391 Y100.89123
G01 X127.99818 Y100.88694
G01 X127.98393 Y100.87823
G01 X127.95818 Y100.87394
G01 X127.94393 Y100.86522
G01 X127.91708 Y100.86103
G01 X127.89267 Y100.84981
G01 X127.87509 Y100.84922
G01 X127.85168 Y100.83881
G01 X127.83387 Y100.83825
G01 X127.81167 Y100.82882
G01 X127.79392 Y100.82827
G01 X127.77167 Y100.81882
G01 X127.75257 Y100.81839
G01 X127.73166 Y100.80983
G01 X127.71101 Y100.80955
G01 X127.65168 Y100.79382
G01 X127.62945 Y100.79370
G01 X127.61167 Y100.78681
G01 X127.58940 Y100.78669
G01 X127.57167 Y100.77983
G01 X127.54797 Y100.77990
G01 X127.53166 Y100.77381
G01 X127.50677 Y100.77427
G01 X127.49168 Y100.76880
G01 X127.46557 Y100.76962
G01 X127.45168 Y100.76482
G01 X127.42557 Y100.76563
G01 X127.41167 Y100.76083
G01 X127.38559 Y100.76164
G01 X127.35998 Y100.75565
G01 X127.34436 Y100.75798
G01 X127.31998 Y100.75265
G01 X127.30319 Y100.75534
G01 X127.28000 Y100.75064
G01 X127.26161 Y100.75382
G01 X127.23999 Y100.74965
G01 X127.22165 Y100.75283
G01 X127.19999 Y100.74864
G01 X127.17997 Y100.75232
G01 X127.14827 Y100.74981
G01 X127.11754 Y100.76621
G01 X127.10453 Y100.78570
G01 X127.09996 Y100.80863
G01 X127.09996 Y100.85362
G01 X126.70438 Y100.88674
G01 X126.24073 Y101.01755
G01 X125.79041 Y101.24589
G01 X125.40248 Y101.55062
G01 X125.08739 Y101.91500
G01 X124.85915 Y102.31264
G01 X123.87800 Y102.31264
G01 X123.85504 Y102.31721
G01 X123.82809 Y102.33931
G01 X123.81798 Y102.37264
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X123.93799 Y102.43266 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X123.93799 Y102.43266
G01 X123.93799 Y104.34464
G01 X124.89400 Y104.34464
G01 X124.91851 Y104.34987
G01 X124.92941 Y104.35622
G01 X124.94609 Y104.37492
G01 X125.18198 Y104.78823
G01 X125.48942 Y105.14378
G01 X125.85971 Y105.43331
G01 X126.27893 Y105.64588
G01 X126.73133 Y105.77352
G01 X127.09996 Y105.80331
G01 X127.09996 Y100.97401
G01 X126.73133 Y101.00381
G01 X126.27893 Y101.13144
G01 X125.85971 Y101.34401
G01 X125.48942 Y101.63355
G01 X125.18198 Y101.98907
G01 X124.94609 Y102.40238
G01 X124.92941 Y102.42107
G01 X124.91851 Y102.42742
G01 X124.89400 Y102.43266
G01 X123.93799 Y102.43266
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X123.31397 Y105.93265 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X123.31397 Y105.93265
G01 X123.31854 Y105.90971
G01 X123.33154 Y105.89023
G01 X123.36228 Y105.87382
G01 X123.56398 Y105.87265
G01 X123.56515 Y105.67095
G01 X123.58155 Y105.64022
G01 X123.60104 Y105.62721
G01 X123.62400 Y105.62264
G01 X123.64693 Y105.62721
G01 X123.66642 Y105.64022
G01 X123.68282 Y105.67095
G01 X123.68399 Y105.87265
G01 X123.88567 Y105.87382
G01 X123.91640 Y105.89023
G01 X123.92941 Y105.90971
G01 X123.93398 Y105.93265
G01 X123.92941 Y105.95561
G01 X123.91640 Y105.97509
G01 X123.88567 Y105.99150
G01 X123.68399 Y105.99267
G01 X123.68282 Y106.19435
G01 X123.66642 Y106.22508
G01 X123.64693 Y106.23808
G01 X123.62400 Y106.24266
G01 X123.60104 Y106.23808
G01 X123.58155 Y106.22508
G01 X123.56515 Y106.19435
G01 X123.56398 Y105.99267
G01 X123.36228 Y105.99150
G01 X123.33154 Y105.97509
G01 X123.31854 Y105.95561
G01 X123.31397 Y105.93265
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X126.29928 Y107.24746 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X126.29928 Y107.24746
G01 X126.30151 Y107.08644
G01 X126.34911 Y106.89597
G01 X126.40865 Y106.77504
G01 X126.52531 Y106.65985
G01 X126.69559 Y106.60202
G01 X126.81482 Y106.60202
G01 X126.96941 Y106.65249
G01 X126.99874 Y106.67062
G01 X127.04634 Y106.71825
G01 X127.06260 Y106.74258
G01 X127.06687 Y106.75665
G01 X127.06684 Y106.78591
G01 X127.05564 Y106.81296
G01 X127.04632 Y106.82432
G01 X127.02198 Y106.84057
G01 X126.99328 Y106.84626
G01 X126.97865 Y106.84481
G01 X126.95160 Y106.83361
G01 X126.90517 Y106.78919
G01 X126.79067 Y106.75104
G01 X126.71978 Y106.75104
G01 X126.60525 Y106.78919
G01 X126.53113 Y106.86333
G01 X126.49265 Y106.94032
G01 X126.44927 Y107.11385
G01 X126.44927 Y107.23824
G01 X126.49265 Y107.41177
G01 X126.53113 Y107.48873
G01 X126.60527 Y107.56287
G01 X126.71978 Y107.60105
G01 X126.79064 Y107.60105
G01 X126.90517 Y107.56287
G01 X126.95160 Y107.51845
G01 X126.97865 Y107.50725
G01 X127.00791 Y107.50722
G01 X127.02198 Y107.51149
G01 X127.04632 Y107.52774
G01 X127.06257 Y107.55208
G01 X127.06829 Y107.58078
G01 X127.06260 Y107.60948
G01 X127.04634 Y107.63381
G01 X126.99874 Y107.68144
G01 X126.96941 Y107.69958
G01 X126.81482 Y107.75007
G01 X126.69557 Y107.75007
G01 X126.54104 Y107.69958
G01 X126.51172 Y107.68144
G01 X126.40865 Y107.57702
G01 X126.35480 Y107.47148
G01 X126.29928 Y107.24746
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X127.25165 Y106.77126 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X127.25165 Y106.77126
G01 X127.25307 Y106.75663
G01 X127.26428 Y106.72960
G01 X127.33042 Y106.66280
G01 X127.45226 Y106.60306
G01 X127.77245 Y106.60306
G01 X127.88398 Y106.65655
G01 X127.90347 Y106.67062
G01 X127.95891 Y106.72742
G01 X128.01868 Y106.84928
G01 X128.01868 Y107.12185
G01 X127.96514 Y107.23338
G01 X127.95109 Y107.25287
G01 X127.89430 Y107.30831
G01 X127.77504 Y107.36714
G01 X128.01048 Y107.63826
G01 X128.01647 Y107.65121
G01 X128.02061 Y107.67936
G01 X128.01398 Y107.70704
G01 X127.99755 Y107.73023
G01 X127.98632 Y107.73910
G01 X127.97362 Y107.74565
G01 X127.94571 Y107.75104
G01 X127.32666 Y107.75104
G01 X127.29796 Y107.74532
G01 X127.27362 Y107.72906
G01 X127.26428 Y107.71771
G01 X127.25307 Y107.69069
G01 X127.25307 Y107.66140
G01 X127.26428 Y107.63437
G01 X127.27362 Y107.62302
G01 X127.28498 Y107.61367
G01 X127.31200 Y107.60247
G01 X127.78040 Y107.60105
G01 X127.55589 Y107.34448
G01 X127.54157 Y107.31992
G01 X127.53743 Y107.29178
G01 X127.53941 Y107.27761
G01 X127.55117 Y107.25172
G01 X127.56049 Y107.24090
G01 X127.58442 Y107.22548
G01 X127.61236 Y107.22010
G01 X127.73750 Y107.22010
G01 X127.80601 Y107.18583
G01 X127.83644 Y107.15541
G01 X127.87070 Y107.08690
G01 X127.87070 Y106.88424
G01 X127.83644 Y106.81571
G01 X127.80603 Y106.78528
G01 X127.73753 Y106.75104
G01 X127.48719 Y106.75104
G01 X127.41868 Y106.78528
G01 X127.36831 Y106.83364
G01 X127.34129 Y106.84484
G01 X127.31200 Y106.84484
G01 X127.28498 Y106.83364
G01 X127.26428 Y106.81294
G01 X127.25737 Y106.79996
G01 X127.25165 Y106.77126
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X127.41998 Y102.40497 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X127.41998 Y102.40497
G01 X127.41998 Y104.37233
G01 X127.43999 Y104.36864
G01 X127.45998 Y104.37233
G01 X127.48000 Y104.36864
G01 X127.49999 Y104.37233
G01 X127.51998 Y104.36864
G01 X127.57997 Y104.37233
G01 X127.59999 Y104.36864
G01 X127.61998 Y104.37233
G01 X127.63999 Y104.36864
G01 X127.65998 Y104.37233
G01 X127.71998 Y104.36864
G01 X127.73997 Y104.37233
G01 X127.75998 Y104.36864
G01 X127.81998 Y104.37233
G01 X127.83999 Y104.36864
G01 X127.86049 Y104.37248
G01 X127.88099 Y104.36864
G01 X127.90098 Y104.37233
G01 X127.92099 Y104.36864
G01 X127.94098 Y104.37233
G01 X127.96100 Y104.36864
G01 X127.98099 Y104.37233
G01 X128.00098 Y104.36864
G01 X128.02097 Y104.37233
G01 X128.04098 Y104.36864
G01 X128.06097 Y104.37233
G01 X128.08099 Y104.36864
G01 X128.10098 Y104.37233
G01 X128.12099 Y104.36864
G01 X128.14098 Y104.37233
G01 X128.16100 Y104.36864
G01 X128.18099 Y104.37233
G01 X128.20098 Y104.36864
G01 X128.22097 Y104.37233
G01 X128.24098 Y104.36864
G01 X128.26097 Y104.37233
G01 X128.28099 Y104.36864
G01 X128.30098 Y104.37233
G01 X128.32099 Y104.36864
G01 X128.34098 Y104.37233
G01 X128.36100 Y104.36864
G01 X128.38099 Y104.37233
G01 X128.40098 Y104.36864
G01 X128.42097 Y104.37233
G01 X128.44098 Y104.36864
G01 X128.46097 Y104.37233
G01 X128.48099 Y104.36864
G01 X128.50098 Y104.37233
G01 X128.52099 Y104.36864
G01 X128.54098 Y104.37233
G01 X128.56100 Y104.36864
G01 X128.58096 Y104.37233
G01 X128.60098 Y104.36864
G01 X128.62097 Y104.37233
G01 X128.64098 Y104.36864
G01 X128.66097 Y104.37233
G01 X128.68099 Y104.36864
G01 X128.70098 Y104.37233
G01 X128.72099 Y104.36864
G01 X128.74098 Y104.37233
G01 X128.76100 Y104.36864
G01 X128.78099 Y104.37233
G01 X128.80098 Y104.36864
G01 X128.82097 Y104.37233
G01 X128.84098 Y104.36864
G01 X128.86097 Y104.37233
G01 X128.88099 Y104.36864
G01 X128.90098 Y104.37233
G01 X128.92099 Y104.36864
G01 X128.94098 Y104.37233
G01 X128.96100 Y104.36864
G01 X128.98099 Y104.37233
G01 X129.00098 Y104.36864
G01 X129.02096 Y104.37233
G01 X129.04098 Y104.36864
G01 X129.06097 Y104.37233
G01 X129.08098 Y104.36864
G01 X129.10097 Y104.37233
G01 X129.12099 Y104.36864
G01 X129.14098 Y104.37233
G01 X129.16099 Y104.36864
G01 X129.18098 Y104.37233
G01 X129.20100 Y104.36864
G01 X129.22099 Y104.37233
G01 X129.24098 Y104.36864
G01 X129.26097 Y104.37233
G01 X129.28098 Y104.36864
G01 X129.30097 Y104.37233
G01 X129.32099 Y104.36864
G01 X129.34098 Y104.37233
G01 X129.36925 Y104.36946
G01 X129.40240 Y104.30669
G01 X129.42096 Y104.24477
G01 X129.42096 Y102.53253
G01 X129.40240 Y102.47060
G01 X129.36925 Y102.40784
G01 X129.34098 Y102.40497
G01 X129.32099 Y102.40865
G01 X129.30097 Y102.40497
G01 X129.28098 Y102.40865
G01 X129.26097 Y102.40497
G01 X129.24098 Y102.40865
G01 X129.22099 Y102.40497
G01 X129.20100 Y102.40865
G01 X129.18098 Y102.40497
G01 X129.16099 Y102.40865
G01 X129.14098 Y102.40497
G01 X129.12099 Y102.40865
G01 X129.10097 Y102.40497
G01 X129.08098 Y102.40865
G01 X129.06097 Y102.40497
G01 X129.04098 Y102.40865
G01 X129.02096 Y102.40497
G01 X129.00098 Y102.40865
G01 X128.98099 Y102.40497
G01 X128.96100 Y102.40865
G01 X128.94098 Y102.40497
G01 X128.92099 Y102.40865
G01 X128.90098 Y102.40497
G01 X128.88099 Y102.40865
G01 X128.86097 Y102.40497
G01 X128.84098 Y102.40865
G01 X128.82097 Y102.40497
G01 X128.80098 Y102.40865
G01 X128.78099 Y102.40497
G01 X128.76100 Y102.40865
G01 X128.74098 Y102.40497
G01 X128.72099 Y102.40865
G01 X128.70098 Y102.40497
G01 X128.68099 Y102.40865
G01 X128.66097 Y102.40497
G01 X128.64098 Y102.40865
G01 X128.62097 Y102.40497
G01 X128.60098 Y102.40865
G01 X128.58096 Y102.40497
G01 X128.56100 Y102.40865
G01 X128.54098 Y102.40497
G01 X128.52099 Y102.40865
G01 X128.50098 Y102.40497
G01 X128.48099 Y102.40865
G01 X128.46097 Y102.40497
G01 X128.44098 Y102.40865
G01 X128.42097 Y102.40497
G01 X128.40098 Y102.40865
G01 X128.38099 Y102.40497
G01 X128.36100 Y102.40865
G01 X128.34098 Y102.40497
G01 X128.32099 Y102.40865
G01 X128.30098 Y102.40497
G01 X128.28099 Y102.40865
G01 X128.26097 Y102.40497
G01 X128.24098 Y102.40865
G01 X128.22097 Y102.40497
G01 X128.20098 Y102.40865
G01 X128.18099 Y102.40497
G01 X128.16100 Y102.40865
G01 X128.14098 Y102.40497
G01 X128.12099 Y102.40865
G01 X128.10098 Y102.40497
G01 X128.08099 Y102.40865
G01 X128.06097 Y102.40497
G01 X128.04098 Y102.40865
G01 X128.02097 Y102.40497
G01 X128.00098 Y102.40865
G01 X127.98099 Y102.40497
G01 X127.96100 Y102.40865
G01 X127.94098 Y102.40497
G01 X127.92099 Y102.40865
G01 X127.90098 Y102.40497
G01 X127.88099 Y102.40865
G01 X127.86049 Y102.40482
G01 X127.83999 Y102.40865
G01 X127.77997 Y102.40497
G01 X127.75998 Y102.40865
G01 X127.73997 Y102.40497
G01 X127.68000 Y102.40865
G01 X127.65998 Y102.40497
G01 X127.63999 Y102.40865
G01 X127.61998 Y102.40497
G01 X127.59999 Y102.40865
G01 X127.53997 Y102.40497
G01 X127.51998 Y102.40865
G01 X127.49999 Y102.40497
G01 X127.48000 Y102.40865
G01 X127.45998 Y102.40497
G01 X127.43999 Y102.40865
G01 X127.41998 Y102.40497
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X138.54010 Y98.92769 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X138.54010 Y98.92769
G01 X138.54210 Y98.67236
G01 X138.60187 Y98.55052
G01 X138.65732 Y98.49373
G01 X138.68165 Y98.47747
G01 X138.71035 Y98.47176
G01 X138.72498 Y98.47318
G01 X138.75201 Y98.48438
G01 X138.77271 Y98.50508
G01 X138.78391 Y98.53211
G01 X138.78533 Y98.54674
G01 X138.78391 Y98.56139
G01 X138.77271 Y98.58842
G01 X138.72435 Y98.63881
G01 X138.69008 Y98.70731
G01 X138.69008 Y98.90998
G01 X138.72435 Y98.97851
G01 X138.75475 Y99.00891
G01 X138.82328 Y99.04318
G01 X138.88864 Y99.04318
G01 X139.00314 Y99.00500
G01 X139.57342 Y98.43675
G01 X139.60045 Y98.42555
G01 X139.62973 Y98.42555
G01 X139.65676 Y98.43675
G01 X139.67746 Y98.45746
G01 X139.68437 Y98.47043
G01 X139.69008 Y98.49911
G01 X139.68866 Y99.13282
G01 X139.67746 Y99.15984
G01 X139.65676 Y99.18054
G01 X139.64378 Y99.18745
G01 X139.61510 Y99.19317
G01 X139.60045 Y99.19174
G01 X139.57342 Y99.18054
G01 X139.55272 Y99.15984
G01 X139.54152 Y99.13282
G01 X139.54010 Y98.68019
G01 X139.09669 Y99.12357
G01 X139.06738 Y99.14171
G01 X138.92453 Y99.18933
G01 X138.90083 Y99.19317
G01 X138.78833 Y99.19116
G01 X138.66649 Y99.13139
G01 X138.60187 Y99.06680
G01 X138.54800 Y98.96124
G01 X138.54010 Y98.92769
G01 X138.54210 Y97.71999
G01 X138.54210 Y97.94493
G01 X138.60187 Y98.06680
G01 X138.70492 Y98.17120
G01 X138.72702 Y98.18649
G01 X138.94843 Y98.24079
G01 X139.28178 Y98.24079
G01 X139.50316 Y98.18649
G01 X139.52526 Y98.17120
G01 X139.56748 Y98.12901
G01 X139.60108 Y98.16261
G01 X139.65109 Y98.25941
G01 X139.67319 Y98.27859
G01 X139.70095 Y98.28783
G01 X139.73014 Y98.28575
G01 X139.75633 Y98.27267
G01 X139.77550 Y98.25057
G01 X139.78475 Y98.22281
G01 X139.78515 Y98.20810
G01 X139.77743 Y98.17988
G01 X139.72356 Y98.07432
G01 X139.65871 Y98.00813
G01 X139.68218 Y97.96124
G01 X139.69008 Y97.92769
G01 X139.68808 Y97.71999
G01 X139.62831 Y97.59815
G01 X139.52529 Y97.49373
G01 X139.50316 Y97.47844
G01 X139.28178 Y97.42413
G01 X138.93022 Y97.42637
G01 X138.72702 Y97.47844
G01 X138.70489 Y97.49373
G01 X138.60187 Y97.59815
G01 X138.54210 Y97.71999
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X138.69008 Y97.75494 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X138.69008 Y97.75494
G01 X138.69008 Y97.90998
G01 X138.72435 Y97.97851
G01 X138.79628 Y98.05045
G01 X138.95765 Y98.09081
G01 X139.27253 Y98.09081
G01 X139.43390 Y98.05045
G01 X139.46141 Y98.02294
G01 X139.36377 Y97.92393
G01 X139.30400 Y97.80208
G01 X139.30342 Y97.67496
G01 X139.31462 Y97.64793
G01 X139.33532 Y97.62723
G01 X139.34830 Y97.62032
G01 X139.37700 Y97.61461
G01 X139.39163 Y97.61603
G01 X139.41866 Y97.62723
G01 X139.43936 Y97.64793
G01 X139.45056 Y97.67496
G01 X139.45198 Y97.76713
G01 X139.48625 Y97.83564
G01 X139.54010 Y97.88949
G01 X139.54010 Y97.75494
G01 X139.50583 Y97.68644
G01 X139.43390 Y97.61448
G01 X139.27253 Y97.57412
G01 X138.95765 Y97.57412
G01 X138.79628 Y97.61448
G01 X138.72435 Y97.68644
G01 X138.69008 Y97.75494
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X140.21248 Y96.51867 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X140.21248 Y96.51867
G01 X140.21248 Y100.09964
G01 X141.60247 Y100.09964
G01 X141.60247 Y96.51867
G01 X140.21248 Y96.51867
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X141.72249 Y93.24865 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X141.72249 Y93.24865
G01 X144.73346 Y93.24865
G01 X144.73346 Y103.36865
G01 X141.72249 Y103.36865
G01 X141.72249 Y93.24865
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X140.21248 Y93.24865 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X140.21248 Y93.24865
G01 X140.21248 Y96.39866
G01 X141.60247 Y96.39866
G01 X141.60247 Y93.24865
G01 X140.21248 Y93.24865
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X140.09247 Y93.18863 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X140.09247 Y93.18863
G01 X140.09247 Y103.42864
G01 X140.10258 Y103.46199
G01 X140.12953 Y103.48409
G01 X140.15249 Y103.48866
G01 X144.79348 Y103.48866
G01 X144.82680 Y103.47855
G01 X144.84890 Y103.45160
G01 X144.85347 Y103.42864
G01 X144.85347 Y93.18863
G01 X144.84336 Y93.15531
G01 X144.81641 Y93.13321
G01 X144.79348 Y93.12864
G01 X140.15249 Y93.12864
G01 X140.11914 Y93.13875
G01 X140.09704 Y93.16570
G01 X140.09247 Y93.18863
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X140.21248 Y87.51971 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X140.21248 Y87.51971
G01 X140.21248 Y90.66865
G01 X141.60247 Y90.66865
G01 X141.60247 Y87.51971
G01 X140.21248 Y87.51971
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X155.13760 Y91.18864 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X155.13760 Y91.18864
G01 X155.14550 Y91.22219
G01 X155.19937 Y91.32775
G01 X155.26399 Y91.39237
G01 X155.38583 Y91.45214
G01 X155.49833 Y91.45412
G01 X155.52203 Y91.45028
G01 X155.66488 Y91.40268
G01 X155.69419 Y91.38455
G01 X156.13760 Y90.94116
G01 X156.13902 Y91.39377
G01 X156.15022 Y91.42084
G01 X156.17092 Y91.44149
G01 X156.19795 Y91.45269
G01 X156.21260 Y91.45412
G01 X156.24128 Y91.44843
G01 X156.25426 Y91.44149
G01 X156.27496 Y91.42084
G01 X156.28616 Y91.39377
G01 X156.28759 Y90.76009
G01 X156.28187 Y90.73141
G01 X156.27496 Y90.71843
G01 X156.25426 Y90.69778
G01 X156.22724 Y90.68653
G01 X156.19795 Y90.68653
G01 X156.17092 Y90.69778
G01 X155.60067 Y91.26598
G01 X155.48614 Y91.30415
G01 X155.42076 Y91.30415
G01 X155.35226 Y91.26994
G01 X155.32185 Y91.23946
G01 X155.28759 Y91.17093
G01 X155.28759 Y90.96829
G01 X155.32185 Y90.89976
G01 X155.37021 Y90.84937
G01 X155.38142 Y90.82237
G01 X155.38284 Y90.80769
G01 X155.38142 Y90.79306
G01 X155.37021 Y90.76606
G01 X155.34951 Y90.74533
G01 X155.32249 Y90.73413
G01 X155.30786 Y90.73271
G01 X155.27915 Y90.73845
G01 X155.25482 Y90.75468
G01 X155.19937 Y90.81147
G01 X155.13961 Y90.93331
G01 X155.13760 Y91.18864
G01 X155.13760 Y90.04579
G01 X155.13902 Y90.03116
G01 X155.15022 Y90.00413
G01 X155.17093 Y89.98343
G01 X155.19795 Y89.97223
G01 X155.21261 Y89.97086
G01 X156.21260 Y89.97086
G01 X156.24128 Y89.97652
G01 X156.25426 Y89.98343
G01 X156.27496 Y90.00413
G01 X156.28616 Y90.03116
G01 X156.28759 Y90.04579
G01 X156.28759 Y90.52201
G01 X156.28187 Y90.55074
G01 X156.27496 Y90.56369
G01 X156.25426 Y90.58440
G01 X156.22724 Y90.59562
G01 X156.21260 Y90.59707
G01 X156.19795 Y90.59562
G01 X156.17092 Y90.58440
G01 X156.15022 Y90.56369
G01 X156.14331 Y90.55074
G01 X156.13760 Y90.52201
G01 X156.13760 Y90.12079
G01 X155.19795 Y90.11937
G01 X155.17093 Y90.10820
G01 X155.15022 Y90.08747
G01 X155.14332 Y90.07449
G01 X155.13760 Y90.04579
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X140.21248 Y100.21966 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X140.21248 Y100.21966
G01 X140.21248 Y103.36865
G01 X141.60247 Y103.36865
G01 X141.60247 Y100.21966
G01 X140.21248 Y100.21966
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X140.27997 Y106.88866 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X140.27997 Y106.88866
G01 X140.27997 Y120.12863
G01 X140.28454 Y120.15160
G01 X140.30664 Y120.17854
G01 X140.33999 Y120.18865
G01 X149.57998 Y120.18865
G01 X149.60291 Y120.18408
G01 X149.62986 Y120.16198
G01 X149.63997 Y120.12863
G01 X149.63997 Y106.88866
G01 X149.63540 Y106.86572
G01 X149.61330 Y106.83877
G01 X149.57998 Y106.82866
G01 X140.33999 Y106.82866
G01 X140.31703 Y106.83323
G01 X140.29008 Y106.85533
G01 X140.27997 Y106.88866
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X140.39999 Y106.94868 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X140.39999 Y106.94868
G01 X140.39999 Y107.94865
G01 X149.51996 Y107.94865
G01 X149.51996 Y106.94868
G01 X140.39999 Y106.94868
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X140.39999 Y108.06866 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X140.39999 Y108.06866
G01 X140.39999 Y118.94865
G01 X149.51996 Y118.94865
G01 X149.51996 Y108.06866
G01 X140.39999 Y108.06866
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X138.59760 Y112.77056 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X138.59760 Y112.77056
G01 X138.59961 Y113.16875
G01 X138.65938 Y113.29060
G01 X138.71477 Y113.34739
G01 X138.73428 Y113.36146
G01 X138.84584 Y113.41498
G01 X139.00593 Y113.41699
G01 X139.03946 Y113.40909
G01 X139.14502 Y113.35522
G01 X139.20182 Y113.29977
G01 X139.21589 Y113.28029
G01 X139.26349 Y113.18506
G01 X139.27126 Y113.15260
G01 X139.64241 Y113.41064
G01 X139.67096 Y113.41699
G01 X139.69979 Y113.41188
G01 X139.72447 Y113.39616
G01 X139.74124 Y113.37218
G01 X139.74759 Y113.34363
G01 X139.74248 Y113.31480
G01 X139.72676 Y113.29012
G01 X139.27139 Y112.96959
G01 X139.27139 Y112.84556
G01 X139.68724 Y112.84414
G01 X139.71426 Y112.83294
G01 X139.73496 Y112.81224
G01 X139.74617 Y112.78521
G01 X139.74617 Y112.75593
G01 X139.73496 Y112.72890
G01 X139.71426 Y112.70820
G01 X139.68724 Y112.69700
G01 X139.67261 Y112.69558
G01 X138.67261 Y112.69558
G01 X138.65795 Y112.69700
G01 X138.63093 Y112.70820
G01 X138.61023 Y112.72890
G01 X138.59903 Y112.75593
G01 X138.59760 Y112.77056
G01 X138.59903 Y114.02326
G01 X138.59905 Y113.99400
G01 X138.60332 Y113.97993
G01 X138.61960 Y113.95560
G01 X138.76766 Y113.85514
G01 X138.84906 Y113.77376
G01 X138.89905 Y113.67696
G01 X138.90916 Y113.66629
G01 X138.93456 Y113.65179
G01 X138.96362 Y113.64813
G01 X138.99184 Y113.65585
G01 X139.00428 Y113.66370
G01 X139.01495 Y113.67381
G01 X139.02945 Y113.69921
G01 X139.03311 Y113.72827
G01 X139.02539 Y113.75648
G01 X138.97154 Y113.86202
G01 X138.90126 Y113.93368
G01 X139.59760 Y113.93368
G01 X139.59902 Y113.70830
G01 X139.61022 Y113.68128
G01 X139.63093 Y113.66057
G01 X139.64391 Y113.65367
G01 X139.67261 Y113.64795
G01 X139.68724 Y113.64937
G01 X139.71426 Y113.66057
G01 X139.72562 Y113.66992
G01 X139.73496 Y113.68128
G01 X139.74617 Y113.70830
G01 X139.74617 Y114.30901
G01 X139.73496 Y114.33604
G01 X139.71426 Y114.35674
G01 X139.68724 Y114.36794
G01 X139.65795 Y114.36794
G01 X139.63093 Y114.35674
G01 X139.61022 Y114.33604
G01 X139.60332 Y114.32306
G01 X139.59760 Y114.29436
G01 X139.59760 Y114.08366
G01 X138.67261 Y114.08366
G01 X138.64388 Y114.07795
G01 X138.61955 Y114.06169
G01 X138.60329 Y114.03733
G01 X138.59903 Y114.02326
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X138.74759 Y112.84556 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X138.74759 Y112.84556
G01 X139.12140 Y112.84556
G01 X139.12140 Y113.13383
G01 X139.08716 Y113.20233
G01 X139.05673 Y113.23274
G01 X138.98820 Y113.26700
G01 X138.88079 Y113.26700
G01 X138.81226 Y113.23274
G01 X138.78185 Y113.20233
G01 X138.74759 Y113.13380
G01 X138.74759 Y112.84556
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X140.39999 Y119.06867 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X140.39999 Y119.06867
G01 X140.39999 Y120.06864
G01 X149.51996 Y120.06864
G01 X149.51996 Y119.06867
G01 X140.39999 Y119.06867
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X180.47595 Y88.82064 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X180.47595 Y88.82064
G01 X180.47595 Y92.37664
G01 X180.48606 Y92.40999
G01 X180.51301 Y92.43209
G01 X180.53597 Y92.43666
G01 X191.20397 Y92.43666
G01 X191.23730 Y92.42656
G01 X191.25937 Y92.39961
G01 X191.26397 Y92.37664
G01 X191.26397 Y88.82064
G01 X191.25384 Y88.78732
G01 X191.22689 Y88.76522
G01 X191.20397 Y88.76070
G01 X180.53597 Y88.76070
G01 X180.50262 Y88.77076
G01 X180.48053 Y88.79771
G01 X180.47595 Y88.82064
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X180.59597 Y88.88066 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X180.59597 Y88.88066
G01 X180.59597 Y92.31665
G01 X191.14393 Y92.31665
G01 X191.14393 Y88.88066
G01 X180.59597 Y88.88066
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X185.09012 Y96.21740 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X185.09012 Y96.21740
G01 X185.09012 Y96.24669
G01 X185.10132 Y96.27372
G01 X185.12202 Y96.29442
G01 X185.14905 Y96.30562
G01 X185.24676 Y96.30704
G01 X185.36126 Y96.34519
G01 X185.43147 Y96.41540
G01 X185.46965 Y96.52993
G01 X185.47107 Y97.24669
G01 X185.48227 Y97.27371
G01 X185.50297 Y97.29441
G01 X185.53000 Y97.30562
G01 X185.54465 Y97.30704
G01 X185.57333 Y97.30132
G01 X185.58631 Y97.29441
G01 X185.60701 Y97.27371
G01 X185.61821 Y97.24669
G01 X185.61963 Y97.23203
G01 X185.61963 Y96.51773
G01 X185.61580 Y96.49404
G01 X185.56817 Y96.35119
G01 X185.55006 Y96.32187
G01 X185.45484 Y96.22662
G01 X185.42550 Y96.20849
G01 X185.27092 Y96.15802
G01 X185.16370 Y96.15705
G01 X185.13500 Y96.16277
G01 X185.12202 Y96.16968
G01 X185.10132 Y96.19038
G01 X185.09012 Y96.21740
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X185.94584 Y96.23203 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X185.94584 Y96.23203
G01 X185.94584 Y97.23203
G01 X185.95156 Y97.26073
G01 X185.95847 Y97.27371
G01 X185.97917 Y97.29441
G01 X186.00619 Y97.30562
G01 X186.02085 Y97.30704
G01 X186.41902 Y97.30503
G01 X186.54086 Y97.24527
G01 X186.59766 Y97.18982
G01 X186.61171 Y97.17034
G01 X186.66525 Y97.05880
G01 X186.66525 Y96.88146
G01 X186.61171 Y96.76993
G01 X186.59766 Y96.75045
G01 X186.54086 Y96.69500
G01 X186.43533 Y96.64115
G01 X186.40180 Y96.63323
G01 X186.09583 Y96.63323
G01 X186.09441 Y96.21740
G01 X186.08321 Y96.19038
G01 X186.06251 Y96.16968
G01 X186.03548 Y96.15848
G01 X186.02085 Y96.15705
G01 X185.99215 Y96.16277
G01 X185.96782 Y96.17902
G01 X185.95156 Y96.20336
G01 X185.94584 Y96.23203
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X186.09583 Y96.78321 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X186.09583 Y96.78321
G01 X186.09583 Y97.15705
G01 X186.38407 Y97.15705
G01 X186.45257 Y97.12279
G01 X186.48300 Y97.09236
G01 X186.51727 Y97.02385
G01 X186.51727 Y96.91641
G01 X186.48300 Y96.84791
G01 X186.45257 Y96.81748
G01 X186.38407 Y96.78321
G01 X186.09583 Y96.78321
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X186.89832 Y96.56112 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X186.89832 Y96.56112
G01 X186.90048 Y96.54710
G01 X186.91237 Y96.52152
G01 X186.92171 Y96.51085
G01 X186.94549 Y96.49569
G01 X186.95910 Y96.49170
G01 X187.37442 Y96.49038
G01 X187.37584 Y96.21740
G01 X187.38704 Y96.19038
G01 X187.40774 Y96.16968
G01 X187.43477 Y96.15848
G01 X187.44942 Y96.15705
G01 X187.46405 Y96.15848
G01 X187.49108 Y96.16968
G01 X187.51178 Y96.19038
G01 X187.52298 Y96.21740
G01 X187.52440 Y96.49038
G01 X187.60690 Y96.49180
G01 X187.63393 Y96.50300
G01 X187.65463 Y96.52370
G01 X187.66154 Y96.53668
G01 X187.66725 Y96.56536
G01 X187.66583 Y96.58001
G01 X187.65463 Y96.60704
G01 X187.63393 Y96.62774
G01 X187.62095 Y96.63465
G01 X187.59227 Y96.64036
G01 X187.52440 Y96.64036
G01 X187.52298 Y96.91334
G01 X187.51178 Y96.94036
G01 X187.50243 Y96.95172
G01 X187.49108 Y96.96106
G01 X187.46405 Y96.97227
G01 X187.43477 Y96.97227
G01 X187.40774 Y96.96106
G01 X187.38704 Y96.94036
G01 X187.37584 Y96.91334
G01 X187.37442 Y96.64036
G01 X187.07726 Y96.64036
G01 X187.28572 Y97.27026
G01 X187.28364 Y97.29944
G01 X187.27056 Y97.32563
G01 X187.24846 Y97.34481
G01 X187.22070 Y97.35405
G01 X187.19151 Y97.35197
G01 X187.16532 Y97.33889
G01 X187.14615 Y97.31679
G01 X186.90205 Y96.58908
G01 X186.89832 Y96.56112
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X113.97596 Y174.32065 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X113.97596 Y174.32065
G01 X113.97596 Y177.87665
G01 X113.98607 Y177.91000
G01 X114.01302 Y177.93210
G01 X114.03598 Y177.93667
G01 X124.70398 Y177.93667
G01 X124.73731 Y177.92656
G01 X124.75940 Y177.89961
G01 X124.76398 Y177.87665
G01 X124.76398 Y174.32065
G01 X124.75387 Y174.28733
G01 X124.72692 Y174.26523
G01 X124.70398 Y174.26066
G01 X114.03598 Y174.26066
G01 X114.00263 Y174.27077
G01 X113.98053 Y174.29771
G01 X113.97596 Y174.32065
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X114.09598 Y174.38067 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X114.09598 Y174.38067
G01 X114.09598 Y177.81666
G01 X124.64396 Y177.81666
G01 X124.64396 Y174.38067
G01 X114.09598 Y174.38067
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X161.01308 Y178.58739 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X161.01308 Y178.58739
G01 X161.01308 Y179.58739
G01 X161.01450 Y179.60205
G01 X161.02570 Y179.62907
G01 X161.04640 Y179.64977
G01 X161.07343 Y179.66098
G01 X161.08808 Y179.66240
G01 X161.11676 Y179.65668
G01 X161.12974 Y179.64977
G01 X161.15044 Y179.62907
G01 X161.16164 Y179.60205
G01 X161.16306 Y179.18620
G01 X161.58450 Y179.18620
G01 X161.58450 Y179.58739
G01 X161.59022 Y179.61609
G01 X161.59713 Y179.62907
G01 X161.61783 Y179.64977
G01 X161.64485 Y179.66098
G01 X161.67414 Y179.66098
G01 X161.70116 Y179.64977
G01 X161.72186 Y179.62907
G01 X161.73307 Y179.60205
G01 X161.73449 Y179.58739
G01 X161.73449 Y178.58739
G01 X161.73307 Y178.57276
G01 X161.72186 Y178.54574
G01 X161.70116 Y178.52504
G01 X161.67414 Y178.51384
G01 X161.65951 Y178.51241
G01 X161.63081 Y178.51813
G01 X161.61783 Y178.52504
G01 X161.59713 Y178.54574
G01 X161.58592 Y178.57276
G01 X161.58450 Y179.03621
G01 X161.16306 Y179.03621
G01 X161.16164 Y178.57276
G01 X161.15044 Y178.54574
G01 X161.12974 Y178.52504
G01 X161.10271 Y178.51384
G01 X161.08808 Y178.51241
G01 X161.05938 Y178.51813
G01 X161.04640 Y178.52504
G01 X161.02570 Y178.54574
G01 X161.01450 Y178.57276
G01 X161.01308 Y178.58739
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z1.00000 ( retract )

G00 X161.96687 Y178.57276 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z0.01000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X161.96687 Y178.57276
G01 X161.96687 Y178.60205
G01 X161.97807 Y178.62908
G01 X162.54632 Y179.19936
G01 X162.58450 Y179.31386
G01 X162.58450 Y179.37921
G01 X162.55023 Y179.44774
G01 X162.51983 Y179.47815
G01 X162.45130 Y179.51241
G01 X162.24864 Y179.51241
G01 X162.18011 Y179.47815
G01 X162.12971 Y179.42981
G01 X162.11676 Y179.42288
G01 X162.08806 Y179.41719
G01 X162.05935 Y179.42290
G01 X162.03502 Y179.43916
G01 X162.02570 Y179.45054
G01 X162.01450 Y179.47756
G01 X162.01452 Y179.50682
G01 X162.01879 Y179.52089
G01 X162.03505 Y179.54523
G01 X162.09184 Y179.60063
G01 X162.21368 Y179.66039
G01 X162.46903 Y179.66240
G01 X162.50256 Y179.65450
G01 X162.60812 Y179.60063
G01 X162.67271 Y179.53603
G01 X162.73248 Y179.41416
G01 X162.73449 Y179.30167
G01 X162.73065 Y179.27797
G01 X162.68303 Y179.13512
G01 X162.66489 Y179.10581
G01 X162.22151 Y178.66240
G01 X162.67414 Y178.66098
G01 X162.70116 Y178.64978
G01 X162.72186 Y178.62908
G01 X162.73306 Y178.60205
G01 X162.73449 Y178.58739
G01 X162.72877 Y178.55872
G01 X162.72186 Y178.54574
G01 X162.70116 Y178.52504
G01 X162.67414 Y178.51384
G01 X162.65951 Y178.51241
G01 X162.04046 Y178.51241
G01 X162.01175 Y178.51813
G01 X161.99878 Y178.52504
G01 X161.97807 Y178.54574
G01 X161.96687 Y178.57276

G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z10.000000 ( retract )

M5 ( Spindle off. )
G04 P1.000000
M9 ( Coolant off. )
M2 ( Program end. )