sensor off during adv+shorter adv interval

components/BTlib/BTlib_nimble.c

@@ -86,8 +86,9 @@ struct ble_hs_adv_fields adv_fields = {
 struct ble_gap_adv_params adv_params = {
 	.conn_mode = BLE_GAP_CONN_MODE_UND,
 	.disc_mode = BLE_GAP_DISC_MODE_GEN,
-	.itvl_min = 0x4000,
+	.itvl_min = 1000,
-	.itvl_max = 0x4000,
+	.itvl_max = 2000,
+	//.itvl_max = 0x4000,
 };
 
 struct ble_gap_upd_params conn_params = {
@@ -277,6 +278,7 @@ static int gatt_svr_chr_access_batt_level(uint16_t conn_handle, uint16_t attr_ha
 }
 
 static void ble_advertise(void){
+	main_app_conf->sensor->enabled = false;
 	ESP_ERROR_CHECK(ble_gap_adv_set_fields(&adv_fields));
 	ESP_ERROR_CHECK(ble_gap_adv_start(ble_addr_type, NULL, BLE_HS_FOREVER, &adv_params, ble_gap_event, NULL));
 }
@@ -290,6 +292,7 @@ static int ble_gap_event(struct ble_gap_event *event, void* arg){
 			else {
 				conn_handle = event->connect.conn_handle;
 				ESP_ERROR_CHECK(ble_gap_update_params(event->connect.conn_handle, &conn_params));
+				main_app_conf->sensor->enabled = true;
 			}
 		break;
 		case BLE_GAP_EVENT_DISCONNECT:

default_conf.csv

@@ -5,7 +5,7 @@ name,data,string,CO2Sense
 wireless_conf,data,u8,4
 ap_ssid,data,string,CO2Sense
 ap_pass,data,string,testtest
-sensor_conf,data,u16,22
+sensor_conf,data,u16,122
 #
 leds,namespace,,
 led_nb,data,u8,3

main/CO2_Sense.c

@@ -47,7 +47,6 @@ void app_main(void){
 	};
 	ESP_ERROR_CHECK(esp_pm_configure(&pm_config));
 
-
 	configuration_data_t* conf = malloc(sizeof(configuration_data_t));
 	init_conf_from_nvs(conf);
 	
@@ -77,28 +76,18 @@ void app_main(void){
 	
 	init_scd4x();
 	scd4x_power_down();
-	switch(conf->sensor->mode){
-		case SCD4X_NORMAL_MODE:
-			ESP_ERROR_CHECK(scd4x_start_periodic_measurement());
-			ESP_LOGI("scd4x init","started in normal mode");
-		break;
-		case SCD4X_LP_MODE:
-			ESP_ERROR_CHECK(scd4x_start_low_power_periodic_measurement());
-			ESP_LOGI("scd4x init","started in low power mode");
-		break;
-	}
 	if(conf->sensor->mode & SCD4X_CAPTURE_ENABLED){
 		TaskHandle_t sensor_fetch_handle;
 		xTaskCreate(fetch_sensor_task, "FETCH_SENSOR", 4096, conf, tskIDLE_PRIORITY, &sensor_fetch_handle);
 	}
 
 	while(1){
-		int32_t x,y,z;
+		/*int32_t x,y,z;
 		MMC56x3_get_mag_field(&x, &y, &z);
 		float bx, by, bz;
 		MMC56x3_to_mG(x, y, z, &bx, &by, &bz);
 		ESP_LOGI("MAIN", "BField x %ld, y %ld, z %ld", x, y, z);
-		ESP_LOGI("MAIN", "BField x %f mG, y %f mG, z %f mG", bx, by, bz);
+		ESP_LOGI("MAIN", "BField x %f mG, y %f mG, z %f mG", bx, by, bz);*/
 		vTaskDelay(1000 / portTICK_PERIOD_MS);
 	}
 }
@@ -107,12 +96,49 @@ void fetch_sensor_task(void* pvParameters){
 	configuration_data_t* mainConf = (configuration_data_t*) pvParameters;
 	scd4x_config_t* conf = mainConf->sensor;
 	scd4x_data_t* measures = conf->measure;
+	uint8_t sensorStarted = false;
 	while(1){
-		if(conf->mode == SCD4X_SS_MODE) scd4x_measure_single_shot(); 
+		ESP_LOGI("MAIN", "witing for %d sec", conf->delay);
 		vTaskDelay(conf->delay * 1000 / portTICK_PERIOD_MS);
+		if(!conf->enabled){
+			if(sensorStarted){
+				sensorStarted = false;
+				scd4x_power_down();
+			}
+			else{
+				continue;
+			}
+		}
+		if(conf->enabled && !sensorStarted){
+			scd4x_wake_up();
+			for(int i=0; i<5; i++){
+				uint16_t s0, s1, s2;
+				int16_t res=scd4x_get_serial_number(&s0, &s1, &s2);
+				if(res == 0) break;
+				vTaskDelay(500 / portTICK_PERIOD_MS);
+				ESP_LOGI("MAIN", "get serial, res %d; serial %d %d %d", res, s0, s1, s2);
+			}
+			sensorStarted = true;
+			switch(conf->mode){
+				case SCD4X_NORMAL_MODE:
+					ESP_ERROR_CHECK(scd4x_start_periodic_measurement());
+					ESP_LOGI("scd4x init","started in normal mode");
+				break;
+				case SCD4X_LP_MODE:
+					ESP_ERROR_CHECK(scd4x_start_low_power_periodic_measurement());
+					ESP_LOGI("scd4x init","started in low power mode");
+				break;
+			}
+		}
+
+		if(conf->mode == SCD4X_SS_MODE) scd4x_measure_single_shot();
+		ESP_LOGI("MAIN", "reading sensor");
 		uint16_t dataReady;
 		scd4x_get_data_ready_status(&dataReady);
-		if(!(dataReady & 0x07FF)) continue;
+		if(!(dataReady & 0x07FF)){
+			ESP_LOGI("MAIN", "no new sensor data");
+			continue;
+		}
 		int16_t error = scd4x_read_measurement(&measures->co2, &measures->temperature, &measures->humidity);
                 if (error)
                         ESP_LOGE("sensor fetch", "Error executing scd4x_read_measurement(): %i\n", error);