#----------------------------------------------------------- # Vivado v2018.3 (64-bit) # SW Build 2405991 on Thu Dec 6 23:38:27 MST 2018 # IP Build 2404404 on Fri Dec 7 01:43:56 MST 2018 # Start of session at: Tue Nov 23 09:55:17 2021 # Process ID: 11872 # Current directory: C:/Users/E209098F/Documents/uec-electronique/td4/projet/projet-vga/projet-vga.runs/impl_1 # Command line: vivado.exe -log VGA_top.vdi -applog -product Vivado -messageDb vivado.pb -mode batch -source VGA_top.tcl -notrace # Log file: C:/Users/E209098F/Documents/uec-electronique/td4/projet/projet-vga/projet-vga.runs/impl_1/VGA_top.vdi # Journal file: C:/Users/E209098F/Documents/uec-electronique/td4/projet/projet-vga/projet-vga.runs/impl_1\vivado.jou #----------------------------------------------------------- source VGA_top.tcl -notrace Command: link_design -top VGA_top -part xc7z010clg400-1 Design is defaulting to srcset: sources_1 Design is defaulting to constrset: constrs_1 INFO: [Project 1-454] Reading design checkpoint 'c:/Users/e209098F/Documents/uec-electronique/td4/projet/projet-vga/projet-vga.srcs/sources_1/ip/clk_wiz_0_1/clk_wiz_0.dcp' for cell 'U0' INFO: [Netlist 29-17] Analyzing 7 Unisim elements for replacement INFO: [Netlist 29-28] Unisim Transformation completed in 0 CPU seconds INFO: [Project 1-479] Netlist was created with Vivado 2018.3 INFO: [Device 21-403] Loading part xc7z010clg400-1 INFO: [Project 1-570] Preparing netlist for logic optimization Parsing XDC File [c:/Users/e209098F/Documents/uec-electronique/td4/projet/projet-vga/projet-vga.srcs/sources_1/ip/clk_wiz_0_1/clk_wiz_0_board.xdc] for cell 'U0/inst' Finished Parsing XDC File [c:/Users/e209098F/Documents/uec-electronique/td4/projet/projet-vga/projet-vga.srcs/sources_1/ip/clk_wiz_0_1/clk_wiz_0_board.xdc] for cell 'U0/inst' Parsing XDC File [c:/Users/e209098F/Documents/uec-electronique/td4/projet/projet-vga/projet-vga.srcs/sources_1/ip/clk_wiz_0_1/clk_wiz_0.xdc] for cell 'U0/inst' INFO: [Timing 38-35] Done setting XDC timing constraints. [c:/Users/e209098F/Documents/uec-electronique/td4/projet/projet-vga/projet-vga.srcs/sources_1/ip/clk_wiz_0_1/clk_wiz_0.xdc:57] INFO: [Timing 38-2] Deriving generated clocks [c:/Users/e209098F/Documents/uec-electronique/td4/projet/projet-vga/projet-vga.srcs/sources_1/ip/clk_wiz_0_1/clk_wiz_0.xdc:57] get_clocks: Time (s): cpu = 00:00:06 ; elapsed = 00:00:07 . Memory (MB): peak = 1242.094 ; gain = 551.320 Finished Parsing XDC File [c:/Users/e209098F/Documents/uec-electronique/td4/projet/projet-vga/projet-vga.srcs/sources_1/ip/clk_wiz_0_1/clk_wiz_0.xdc] for cell 'U0/inst' Parsing XDC File [C:/Users/e209098F/Downloads/VGA Game 2017 V1-20211109/ZYBO_Master.xdc] Finished Parsing XDC File [C:/Users/e209098F/Downloads/VGA Game 2017 V1-20211109/ZYBO_Master.xdc] INFO: [Opt 31-138] Pushed 0 inverter(s) to 0 load pin(s). Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1242.094 ; gain = 0.000 INFO: [Project 1-111] Unisim Transformation Summary: No Unisim elements were transformed. 10 Infos, 0 Warnings, 0 Critical Warnings and 0 Errors encountered. link_design completed successfully link_design: Time (s): cpu = 00:00:11 ; elapsed = 00:00:24 . Memory (MB): peak = 1242.094 ; gain = 879.125 Command: opt_design Attempting to get a license for feature 'Implementation' and/or device 'xc7z010' INFO: [Common 17-349] Got license for feature 'Implementation' and/or device 'xc7z010' Running DRC as a precondition to command opt_design Starting DRC Task INFO: [DRC 23-27] Running DRC with 2 threads INFO: [Project 1-461] DRC finished with 0 Errors INFO: [Project 1-462] Please refer to the DRC report (report_drc) for more information. Time (s): cpu = 00:00:01 ; elapsed = 00:00:00.510 . Memory (MB): peak = 1242.094 ; gain = 0.000 Starting Cache Timing Information Task INFO: [Timing 38-35] Done setting XDC timing constraints. INFO: [Timing 38-2] Deriving generated clocks Ending Cache Timing Information Task | Checksum: 167d6f2bc Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.014 . Memory (MB): peak = 1258.906 ; gain = 16.812 Starting Logic Optimization Task Phase 1 Retarget INFO: [Opt 31-138] Pushed 0 inverter(s) to 0 load pin(s). INFO: [Opt 31-49] Retargeted 0 cell(s). Phase 1 Retarget | Checksum: 167d6f2bc Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.011 . Memory (MB): peak = 1342.871 ; gain = 0.000 INFO: [Opt 31-389] Phase Retarget created 0 cells and removed 0 cells INFO: [Opt 31-1021] In phase Retarget, 1 netlist objects are constrained preventing optimization. Please run opt_design with -debug_log to get more detail. Phase 2 Constant propagation INFO: [Opt 31-138] Pushed 0 inverter(s) to 0 load pin(s). Phase 2 Constant propagation | Checksum: 167d6f2bc Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.013 . Memory (MB): peak = 1342.871 ; gain = 0.000 INFO: [Opt 31-389] Phase Constant propagation created 0 cells and removed 0 cells Phase 3 Sweep Phase 3 Sweep | Checksum: bfc412b4 Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.016 . Memory (MB): peak = 1342.871 ; gain = 0.000 INFO: [Opt 31-389] Phase Sweep created 0 cells and removed 0 cells Phase 4 BUFG optimization INFO: [Opt 31-194] Inserted BUFG U0/inst/clk_out1_clk_wiz_1_BUFG_inst to drive 0 load(s) on clock net U0/inst/clk_out1_clk_wiz_1_BUFG INFO: [Opt 31-193] Inserted 1 BUFG(s) on clock nets Phase 4 BUFG optimization | Checksum: 1480b8b7b Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.019 . Memory (MB): peak = 1342.871 ; gain = 0.000 INFO: [Opt 31-662] Phase BUFG optimization created 0 cells of which 0 are BUFGs and removed 0 cells. Phase 5 Shift Register Optimization Phase 5 Shift Register Optimization | Checksum: 20e74a998 Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.031 . Memory (MB): peak = 1342.871 ; gain = 0.000 INFO: [Opt 31-389] Phase Shift Register Optimization created 0 cells and removed 0 cells Phase 6 Post Processing Netlist Phase 6 Post Processing Netlist | Checksum: 1b12e64f9 Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.032 . Memory (MB): peak = 1342.871 ; gain = 0.000 INFO: [Opt 31-389] Phase Post Processing Netlist created 0 cells and removed 0 cells Opt_design Change Summary ========================= ------------------------------------------------------------------------------------------------------------------------- | Phase | #Cells created | #Cells Removed | #Constrained objects preventing optimizations | ------------------------------------------------------------------------------------------------------------------------- | Retarget | 0 | 0 | 1 | | Constant propagation | 0 | 0 | 0 | | Sweep | 0 | 0 | 0 | | BUFG optimization | 0 | 0 | 0 | | Shift Register Optimization | 0 | 0 | 0 | | Post Processing Netlist | 0 | 0 | 0 | ------------------------------------------------------------------------------------------------------------------------- Starting Connectivity Check Task Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1342.871 ; gain = 0.000 Ending Logic Optimization Task | Checksum: 14d3cc591 Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.034 . Memory (MB): peak = 1342.871 ; gain = 0.000 Starting Power Optimization Task INFO: [Pwropt 34-132] Skipping clock gating for clocks with a period < 2.00 ns. Ending Power Optimization Task | Checksum: 14d3cc591 Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.005 . Memory (MB): peak = 1342.871 ; gain = 0.000 Starting Final Cleanup Task Ending Final Cleanup Task | Checksum: 14d3cc591 Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1342.871 ; gain = 0.000 Starting Netlist Obfuscation Task Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1342.871 ; gain = 0.000 Ending Netlist Obfuscation Task | Checksum: 14d3cc591 Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1342.871 ; gain = 0.000 INFO: [Common 17-83] Releasing license: Implementation 30 Infos, 0 Warnings, 0 Critical Warnings and 0 Errors encountered. opt_design completed successfully Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1342.871 ; gain = 0.000 INFO: [Timing 38-480] Writing timing data to binary archive. Writing placer database... Writing XDEF routing. Writing XDEF routing logical nets. Writing XDEF routing special nets. Write XDEF Complete: Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.034 . Memory (MB): peak = 1342.871 ; gain = 0.000 Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1342.871 ; gain = 0.000 INFO: [Common 17-1381] The checkpoint 'C:/Users/E209098F/Documents/uec-electronique/td4/projet/projet-vga/projet-vga.runs/impl_1/VGA_top_opt.dcp' has been generated. INFO: [runtcl-4] Executing : report_drc -file VGA_top_drc_opted.rpt -pb VGA_top_drc_opted.pb -rpx VGA_top_drc_opted.rpx Command: report_drc -file VGA_top_drc_opted.rpt -pb VGA_top_drc_opted.pb -rpx VGA_top_drc_opted.rpx INFO: [IP_Flow 19-1839] IP Catalog is up to date. INFO: [DRC 23-27] Running DRC with 2 threads INFO: [Coretcl 2-168] The results of DRC are in file C:/Users/E209098F/Documents/uec-electronique/td4/projet/projet-vga/projet-vga.runs/impl_1/VGA_top_drc_opted.rpt. report_drc completed successfully Command: place_design Attempting to get a license for feature 'Implementation' and/or device 'xc7z010' INFO: [Common 17-349] Got license for feature 'Implementation' and/or device 'xc7z010' INFO: [DRC 23-27] Running DRC with 2 threads INFO: [Vivado_Tcl 4-198] DRC finished with 0 Errors INFO: [Vivado_Tcl 4-199] Please refer to the DRC report (report_drc) for more information. Running DRC as a precondition to command place_design INFO: [DRC 23-27] Running DRC with 2 threads INFO: [Vivado_Tcl 4-198] DRC finished with 0 Errors INFO: [Vivado_Tcl 4-199] Please refer to the DRC report (report_drc) for more information. Starting Placer Task INFO: [Place 30-611] Multithreading enabled for place_design using a maximum of 2 CPUs Phase 1 Placer Initialization Phase 1.1 Placer Initialization Netlist Sorting Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1342.871 ; gain = 0.000 Phase 1.1 Placer Initialization Netlist Sorting | Checksum: 12c34edfb Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.003 . Memory (MB): peak = 1342.871 ; gain = 0.000 Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1342.871 ; gain = 0.000 Phase 1.2 IO Placement/ Clock Placement/ Build Placer Device INFO: [Timing 38-35] Done setting XDC timing constraints. WARNING: [Place 30-574] Poor placement for routing between an IO pin and BUFG. This is normally an ERROR but the CLOCK_DEDICATED_ROUTE constraint is set to FALSE allowing your design to continue. The use of this override is highly discouraged as it may lead to very poor timing results. It is recommended that this error condition be corrected in the design. bouton_down_IBUF_inst (IBUF.O) is locked to IOB_X0Y1 bouton_down_IBUF_BUFG_inst (BUFG.I) is provisionally placed by clockplacer on BUFGCTRL_X0Y0 Resolution: Poor placement of an IO pin and a BUFG has resulted in the router using a non-dedicated path between the two. There are several things that could trigger this DRC, each of which can cause unpredictable clock insertion delays that result in poor timing. This DRC could be caused by any of the following: (a) a clock port was placed on a pin that is not a CCIO-pin (b)the BUFG has not been placed in the same half of the device or SLR as the CCIO-pin (c) a single ended clock has been placed on the N-Side of a differential pair CCIO-pin. Phase 1.2 IO Placement/ Clock Placement/ Build Placer Device | Checksum: 172dde9eb Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.276 . Memory (MB): peak = 1342.871 ; gain = 0.000 Phase 1.3 Build Placer Netlist Model Phase 1.3 Build Placer Netlist Model | Checksum: 1fe9c5a85 Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.329 . Memory (MB): peak = 1342.871 ; gain = 0.000 Phase 1.4 Constrain Clocks/Macros Phase 1.4 Constrain Clocks/Macros | Checksum: 1fe9c5a85 Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.330 . Memory (MB): peak = 1342.871 ; gain = 0.000 Phase 1 Placer Initialization | Checksum: 1fe9c5a85 Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.330 . Memory (MB): peak = 1342.871 ; gain = 0.000 Phase 2 Global Placement Phase 2.1 Floorplanning Phase 2.1 Floorplanning | Checksum: 24fbfc31b Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.362 . Memory (MB): peak = 1342.871 ; gain = 0.000 Phase 2.2 Physical Synthesis In Placer INFO: [Physopt 32-65] No nets found for high-fanout optimization. INFO: [Physopt 32-232] Optimized 0 net. Created 0 new instance. INFO: [Physopt 32-775] End 1 Pass. Optimized 0 net or cell. Created 0 new cell, deleted 0 existing cell and moved 0 existing cell INFO: [Physopt 32-670] No setup violation found. DSP Register Optimization was not performed. INFO: [Physopt 32-670] No setup violation found. Shift Register Optimization was not performed. INFO: [Physopt 32-670] No setup violation found. BRAM Register Optimization was not performed. INFO: [Physopt 32-949] No candidate nets found for HD net replication INFO: [Physopt 32-775] End 1 Pass. Optimized 0 net or cell. Created 0 new cell, deleted 0 existing cell and moved 0 existing cell Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1342.871 ; gain = 0.000 Summary of Physical Synthesis Optimizations ============================================ ---------------------------------------------------------------------------------------------------------------------------------------- | Optimization | Added Cells | Removed Cells | Optimized Cells/Nets | Dont Touch | Iterations | Elapsed | ---------------------------------------------------------------------------------------------------------------------------------------- | Very High Fanout | 0 | 0 | 0 | 0 | 1 | 00:00:00 | | DSP Register | 0 | 0 | 0 | 0 | 0 | 00:00:00 | | Shift Register | 0 | 0 | 0 | 0 | 0 | 00:00:00 | | BRAM Register | 0 | 0 | 0 | 0 | 0 | 00:00:00 | | HD Interface Net Replication | 0 | 0 | 0 | 0 | 1 | 00:00:00 | | Total | 0 | 0 | 0 | 0 | 2 | 00:00:00 | ---------------------------------------------------------------------------------------------------------------------------------------- Phase 2.2 Physical Synthesis In Placer | Checksum: 19571fbec Time (s): cpu = 00:00:01 ; elapsed = 00:00:00.767 . Memory (MB): peak = 1342.871 ; gain = 0.000 Phase 2 Global Placement | Checksum: 19f068e3b Time (s): cpu = 00:00:01 ; elapsed = 00:00:00.778 . Memory (MB): peak = 1342.871 ; gain = 0.000 Phase 3 Detail Placement Phase 3.1 Commit Multi Column Macros Phase 3.1 Commit Multi Column Macros | Checksum: 19f068e3b Time (s): cpu = 00:00:01 ; elapsed = 00:00:00.779 . Memory (MB): peak = 1342.871 ; gain = 0.000 Phase 3.2 Commit Most Macros & LUTRAMs Phase 3.2 Commit Most Macros & LUTRAMs | Checksum: 15793daff Time (s): cpu = 00:00:01 ; elapsed = 00:00:00.810 . Memory (MB): peak = 1342.871 ; gain = 0.000 Phase 3.3 Area Swap Optimization Phase 3.3 Area Swap Optimization | Checksum: 140188978 Time (s): cpu = 00:00:01 ; elapsed = 00:00:00.812 . Memory (MB): peak = 1342.871 ; gain = 0.000 Phase 3.4 Pipeline Register Optimization Phase 3.4 Pipeline Register Optimization | Checksum: 1b233c362 Time (s): cpu = 00:00:01 ; elapsed = 00:00:00.813 . Memory (MB): peak = 1342.871 ; gain = 0.000 Phase 3.5 Small Shape Detail Placement Phase 3.5 Small Shape Detail Placement | Checksum: 13118e91f Time (s): cpu = 00:00:01 ; elapsed = 00:00:00.865 . Memory (MB): peak = 1342.871 ; gain = 0.000 Phase 3.6 Re-assign LUT pins Phase 3.6 Re-assign LUT pins | Checksum: 8f675022 Time (s): cpu = 00:00:01 ; elapsed = 00:00:00.871 . Memory (MB): peak = 1342.871 ; gain = 0.000 Phase 3.7 Pipeline Register Optimization Phase 3.7 Pipeline Register Optimization | Checksum: 1208a0a3c Time (s): cpu = 00:00:01 ; elapsed = 00:00:00.872 . Memory (MB): peak = 1342.871 ; gain = 0.000 Phase 3 Detail Placement | Checksum: 1208a0a3c Time (s): cpu = 00:00:01 ; elapsed = 00:00:00.873 . Memory (MB): peak = 1342.871 ; gain = 0.000 Phase 4 Post Placement Optimization and Clean-Up Phase 4.1 Post Commit Optimization INFO: [Timing 38-35] Done setting XDC timing constraints. Phase 4.1.1 Post Placement Optimization Post Placement Optimization Initialization | Checksum: 150311e2f Phase 4.1.1.1 BUFG Insertion INFO: [Place 46-46] BUFG insertion identified 0 candidate nets, 0 success, 0 bufg driver replicated, 0 skipped for placement/routing, 0 skipped for timing, 0 skipped for netlist change reason Phase 4.1.1.1 BUFG Insertion | Checksum: 150311e2f Time (s): cpu = 00:00:01 ; elapsed = 00:00:00.917 . Memory (MB): peak = 1342.871 ; gain = 0.000 INFO: [Place 30-746] Post Placement Timing Summary WNS=35.783. For the most accurate timing information please run report_timing. Phase 4.1.1 Post Placement Optimization | Checksum: 1b17843c4 Time (s): cpu = 00:00:01 ; elapsed = 00:00:00.918 . Memory (MB): peak = 1342.871 ; gain = 0.000 Phase 4.1 Post Commit Optimization | Checksum: 1b17843c4 Time (s): cpu = 00:00:01 ; elapsed = 00:00:00.918 . Memory (MB): peak = 1342.871 ; gain = 0.000 Phase 4.2 Post Placement Cleanup Phase 4.2 Post Placement Cleanup | Checksum: 1b17843c4 Time (s): cpu = 00:00:01 ; elapsed = 00:00:00.920 . Memory (MB): peak = 1342.871 ; gain = 0.000 Phase 4.3 Placer Reporting Phase 4.3 Placer Reporting | Checksum: 1b17843c4 Time (s): cpu = 00:00:01 ; elapsed = 00:00:00.921 . Memory (MB): peak = 1342.871 ; gain = 0.000 Phase 4.4 Final Placement Cleanup Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1342.871 ; gain = 0.000 Phase 4.4 Final Placement Cleanup | Checksum: 18c66ff7a Time (s): cpu = 00:00:01 ; elapsed = 00:00:00.923 . Memory (MB): peak = 1342.871 ; gain = 0.000 Phase 4 Post Placement Optimization and Clean-Up | Checksum: 18c66ff7a Time (s): cpu = 00:00:01 ; elapsed = 00:00:00.923 . Memory (MB): peak = 1342.871 ; gain = 0.000 Ending Placer Task | Checksum: d428089a Time (s): cpu = 00:00:01 ; elapsed = 00:00:00.924 . Memory (MB): peak = 1342.871 ; gain = 0.000 INFO: [Common 17-83] Releasing license: Implementation 57 Infos, 1 Warnings, 0 Critical Warnings and 0 Errors encountered. place_design completed successfully Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1342.871 ; gain = 0.000 INFO: [Timing 38-480] Writing timing data to binary archive. Writing placer database... Writing XDEF routing. Writing XDEF routing logical nets. Writing XDEF routing special nets. Write XDEF Complete: Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.041 . Memory (MB): peak = 1342.871 ; gain = 0.000 Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1342.871 ; gain = 0.000 INFO: [Common 17-1381] The checkpoint 'C:/Users/E209098F/Documents/uec-electronique/td4/projet/projet-vga/projet-vga.runs/impl_1/VGA_top_placed.dcp' has been generated. INFO: [runtcl-4] Executing : report_io -file VGA_top_io_placed.rpt report_io: Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.038 . Memory (MB): peak = 1342.871 ; gain = 0.000 INFO: [runtcl-4] Executing : report_utilization -file VGA_top_utilization_placed.rpt -pb VGA_top_utilization_placed.pb INFO: [runtcl-4] Executing : report_control_sets -verbose -file VGA_top_control_sets_placed.rpt report_control_sets: Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.001 . Memory (MB): peak = 1342.871 ; gain = 0.000 Command: route_design Attempting to get a license for feature 'Implementation' and/or device 'xc7z010' INFO: [Common 17-349] Got license for feature 'Implementation' and/or device 'xc7z010' Running DRC as a precondition to command route_design INFO: [DRC 23-27] Running DRC with 2 threads WARNING: [DRC PLCK-12] Clock Placer Checks: Poor placement for routing between an IO pin and BUFG. Resolution: Poor placement of an IO pin and a BUFG has resulted in the router using a non-dedicated path between the two. There are several things that could trigger this DRC, each of which can cause unpredictable clock insertion delays that result in poor timing. This DRC could be caused by any of the following: (a) a clock port was placed on a pin that is not a CCIO-pin (b)the BUFG has not been placed in the same half of the device or SLR as the CCIO-pin (c) a single ended clock has been placed on the N-Side of a differential pair CCIO-pin. This is normally an ERROR but the CLOCK_DEDICATED_ROUTE constraint is set to FALSE allowing your design to continue. The use of this override is highly discouraged as it may lead to very poor timing results. It is recommended that this error condition be corrected in the design. bouton_down_IBUF_inst (IBUF.O) is locked to IOB_X0Y1 bouton_down_IBUF_BUFG_inst (BUFG.I) is provisionally placed by clockplacer on BUFGCTRL_X0Y0 INFO: [Vivado_Tcl 4-198] DRC finished with 0 Errors, 1 Warnings INFO: [Vivado_Tcl 4-199] Please refer to the DRC report (report_drc) for more information. Starting Routing Task INFO: [Route 35-254] Multithreading enabled for route_design using a maximum of 2 CPUs Checksum: PlaceDB: efe4607 ConstDB: 0 ShapeSum: c529c293 RouteDB: 0 Phase 1 Build RT Design Phase 1 Build RT Design | Checksum: ce868b76 Time (s): cpu = 00:00:10 ; elapsed = 00:00:09 . Memory (MB): peak = 1412.223 ; gain = 69.352 Post Restoration Checksum: NetGraph: a7807a20 NumContArr: 27061156 Constraints: 0 Timing: 0 Phase 2 Router Initialization Phase 2.1 Create Timer Phase 2.1 Create Timer | Checksum: ce868b76 Time (s): cpu = 00:00:10 ; elapsed = 00:00:09 . Memory (MB): peak = 1442.484 ; gain = 99.613 Phase 2.2 Fix Topology Constraints Phase 2.2 Fix Topology Constraints | Checksum: ce868b76 Time (s): cpu = 00:00:10 ; elapsed = 00:00:09 . Memory (MB): peak = 1448.547 ; gain = 105.676 Phase 2.3 Pre Route Cleanup Phase 2.3 Pre Route Cleanup | Checksum: ce868b76 Time (s): cpu = 00:00:10 ; elapsed = 00:00:09 . Memory (MB): peak = 1448.547 ; gain = 105.676 Number of Nodes with overlaps = 0 Phase 2.4 Update Timing Phase 2.4 Update Timing | Checksum: dcb7e2f8 Time (s): cpu = 00:00:10 ; elapsed = 00:00:10 . Memory (MB): peak = 1453.652 ; gain = 110.781 INFO: [Route 35-416] Intermediate Timing Summary | WNS=35.908 | TNS=0.000 | WHS=-0.278 | THS=-4.597 | Phase 2 Router Initialization | Checksum: 173ad2ca3 Time (s): cpu = 00:00:10 ; elapsed = 00:00:10 . Memory (MB): peak = 1453.652 ; gain = 110.781 Phase 3 Initial Routing Phase 3 Initial Routing | Checksum: 1c424a5c2 Time (s): cpu = 00:00:10 ; elapsed = 00:00:10 . Memory (MB): peak = 1453.652 ; gain = 110.781 Phase 4 Rip-up And Reroute Phase 4.1 Global Iteration 0 Number of Nodes with overlaps = 9 Number of Nodes with overlaps = 0 INFO: [Route 35-416] Intermediate Timing Summary | WNS=34.457 | TNS=0.000 | WHS=N/A | THS=N/A | Phase 4.1 Global Iteration 0 | Checksum: 123c29b62 Time (s): cpu = 00:00:10 ; elapsed = 00:00:10 . Memory (MB): peak = 1453.652 ; gain = 110.781 Phase 4 Rip-up And Reroute | Checksum: 123c29b62 Time (s): cpu = 00:00:10 ; elapsed = 00:00:10 . Memory (MB): peak = 1453.652 ; gain = 110.781 Phase 5 Delay and Skew Optimization Phase 5.1 Delay CleanUp Phase 5.1 Delay CleanUp | Checksum: 123c29b62 Time (s): cpu = 00:00:10 ; elapsed = 00:00:10 . Memory (MB): peak = 1453.652 ; gain = 110.781 Phase 5.2 Clock Skew Optimization Phase 5.2 Clock Skew Optimization | Checksum: 123c29b62 Time (s): cpu = 00:00:10 ; elapsed = 00:00:10 . Memory (MB): peak = 1453.652 ; gain = 110.781 Phase 5 Delay and Skew Optimization | Checksum: 123c29b62 Time (s): cpu = 00:00:10 ; elapsed = 00:00:10 . Memory (MB): peak = 1453.652 ; gain = 110.781 Phase 6 Post Hold Fix Phase 6.1 Hold Fix Iter Phase 6.1.1 Update Timing Phase 6.1.1 Update Timing | Checksum: fe7535e4 Time (s): cpu = 00:00:10 ; elapsed = 00:00:10 . Memory (MB): peak = 1453.652 ; gain = 110.781 INFO: [Route 35-416] Intermediate Timing Summary | WNS=34.610 | TNS=0.000 | WHS=0.075 | THS=0.000 | Phase 6.1 Hold Fix Iter | Checksum: fe7535e4 Time (s): cpu = 00:00:10 ; elapsed = 00:00:10 . Memory (MB): peak = 1453.652 ; gain = 110.781 Phase 6 Post Hold Fix | Checksum: fe7535e4 Time (s): cpu = 00:00:10 ; elapsed = 00:00:10 . Memory (MB): peak = 1453.652 ; gain = 110.781 Phase 7 Route finalize Router Utilization Summary Global Vertical Routing Utilization = 0.0425113 % Global Horizontal Routing Utilization = 0.0321691 % Routable Net Status* *Does not include unroutable nets such as driverless and loadless. Run report_route_status for detailed report. Number of Failed Nets = 0 Number of Unrouted Nets = 0 Number of Partially Routed Nets = 0 Number of Node Overlaps = 0 Phase 7 Route finalize | Checksum: fe7535e4 Time (s): cpu = 00:00:10 ; elapsed = 00:00:10 . Memory (MB): peak = 1453.652 ; gain = 110.781 Phase 8 Verifying routed nets Verification completed successfully Phase 8 Verifying routed nets | Checksum: fe7535e4 Time (s): cpu = 00:00:10 ; elapsed = 00:00:10 . Memory (MB): peak = 1454.480 ; gain = 111.609 Phase 9 Depositing Routes Phase 9 Depositing Routes | Checksum: ac130b84 Time (s): cpu = 00:00:10 ; elapsed = 00:00:10 . Memory (MB): peak = 1454.480 ; gain = 111.609 Phase 10 Post Router Timing INFO: [Route 35-57] Estimated Timing Summary | WNS=34.610 | TNS=0.000 | WHS=0.075 | THS=0.000 | INFO: [Route 35-327] The final timing numbers are based on the router estimated timing analysis. For a complete and accurate timing signoff, please run report_timing_summary. Phase 10 Post Router Timing | Checksum: ac130b84 Time (s): cpu = 00:00:10 ; elapsed = 00:00:10 . Memory (MB): peak = 1454.480 ; gain = 111.609 INFO: [Route 35-16] Router Completed Successfully Time (s): cpu = 00:00:10 ; elapsed = 00:00:10 . Memory (MB): peak = 1454.480 ; gain = 111.609 Routing Is Done. INFO: [Common 17-83] Releasing license: Implementation 74 Infos, 2 Warnings, 0 Critical Warnings and 0 Errors encountered. route_design completed successfully route_design: Time (s): cpu = 00:00:12 ; elapsed = 00:00:12 . Memory (MB): peak = 1454.480 ; gain = 111.609 Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.001 . Memory (MB): peak = 1454.480 ; gain = 0.000 INFO: [Timing 38-480] Writing timing data to binary archive. Writing placer database... Writing XDEF routing. Writing XDEF routing logical nets. Writing XDEF routing special nets. Write XDEF Complete: Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.043 . Memory (MB): peak = 1454.938 ; gain = 0.457 Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1454.938 ; gain = 0.000 INFO: [Common 17-1381] The checkpoint 'C:/Users/E209098F/Documents/uec-electronique/td4/projet/projet-vga/projet-vga.runs/impl_1/VGA_top_routed.dcp' has been generated. INFO: [runtcl-4] Executing : report_drc -file VGA_top_drc_routed.rpt -pb VGA_top_drc_routed.pb -rpx VGA_top_drc_routed.rpx Command: report_drc -file VGA_top_drc_routed.rpt -pb VGA_top_drc_routed.pb -rpx VGA_top_drc_routed.rpx INFO: [IP_Flow 19-1839] IP Catalog is up to date. INFO: [DRC 23-27] Running DRC with 2 threads INFO: [Coretcl 2-168] The results of DRC are in file C:/Users/E209098F/Documents/uec-electronique/td4/projet/projet-vga/projet-vga.runs/impl_1/VGA_top_drc_routed.rpt. report_drc completed successfully INFO: [runtcl-4] Executing : report_methodology -file VGA_top_methodology_drc_routed.rpt -pb VGA_top_methodology_drc_routed.pb -rpx VGA_top_methodology_drc_routed.rpx Command: report_methodology -file VGA_top_methodology_drc_routed.rpt -pb VGA_top_methodology_drc_routed.pb -rpx VGA_top_methodology_drc_routed.rpx INFO: [Timing 38-35] Done setting XDC timing constraints. INFO: [DRC 23-133] Running Methodology with 2 threads INFO: [Coretcl 2-1520] The results of Report Methodology are in file C:/Users/E209098F/Documents/uec-electronique/td4/projet/projet-vga/projet-vga.runs/impl_1/VGA_top_methodology_drc_routed.rpt. report_methodology completed successfully INFO: [runtcl-4] Executing : report_power -file VGA_top_power_routed.rpt -pb VGA_top_power_summary_routed.pb -rpx VGA_top_power_routed.rpx Command: report_power -file VGA_top_power_routed.rpt -pb VGA_top_power_summary_routed.pb -rpx VGA_top_power_routed.rpx INFO: [Timing 38-35] Done setting XDC timing constraints. Running Vector-less Activity Propagation... Finished Running Vector-less Activity Propagation 86 Infos, 2 Warnings, 0 Critical Warnings and 0 Errors encountered. report_power completed successfully INFO: [runtcl-4] Executing : report_route_status -file VGA_top_route_status.rpt -pb VGA_top_route_status.pb INFO: [runtcl-4] Executing : report_timing_summary -max_paths 10 -file VGA_top_timing_summary_routed.rpt -pb VGA_top_timing_summary_routed.pb -rpx VGA_top_timing_summary_routed.rpx -warn_on_violation INFO: [Timing 38-91] UpdateTimingParams: Speed grade: -1, Delay Type: min_max. INFO: [Timing 38-191] Multithreading enabled for timing update using a maximum of 2 CPUs INFO: [runtcl-4] Executing : report_incremental_reuse -file VGA_top_incremental_reuse_routed.rpt INFO: [Vivado_Tcl 4-1062] Incremental flow is disabled. No incremental reuse Info to report. INFO: [runtcl-4] Executing : report_clock_utilization -file VGA_top_clock_utilization_routed.rpt INFO: [runtcl-4] Executing : report_bus_skew -warn_on_violation -file VGA_top_bus_skew_routed.rpt -pb VGA_top_bus_skew_routed.pb -rpx VGA_top_bus_skew_routed.rpx INFO: [Timing 38-91] UpdateTimingParams: Speed grade: -1, Delay Type: min_max. INFO: [Timing 38-191] Multithreading enabled for timing update using a maximum of 2 CPUs INFO: [Common 17-206] Exiting Vivado at Tue Nov 23 09:56:04 2021...