55 lines
1.3 KiB
Markdown
55 lines
1.3 KiB
Markdown
# everblu-meters
|
|
Fetch water usage data from Cyble EverBlu meters using RADIAN protocol.
|
|
|
|
|
|
## Hardware
|
|
|
|
Currently the project runs on Raspberry Pi with an RF transreciver (CC1101).
|
|
|
|
### Connections (rpi to CC1101):
|
|
- pin 1 (3V3) to pin 2 (VCC)
|
|
- pin 6 (GND) to pin 1 (GND)
|
|
- pin 11 (GPIO0 ) to pin 3 (GDO0)
|
|
- pin 24 (CE0) to pin 4 (CSN)
|
|
- pin 23 (SCLK) to pin 5 (SCK)
|
|
- pin 19 (MOSI) to pin 6 (MOSI)
|
|
- pin 21 (MISO) to pin 7 (MISO)
|
|
- pin 13 (GPIO27) to pin 8 (GD02)
|
|
|
|
|
|
## Configuration
|
|
1. Enable SPI in raspi-config.
|
|
2. Install WiringPi from https://github.com/WiringPi/WiringPi/
|
|
3. Set meter serial number and production date in `cc1101.c`, it can be found on the meter label itself:
|
|
|
|
|
|
|
|
|
|
|
|
## Compiling
|
|
|
|
```
|
|
gcc radian_trx.c -o radian_trx -lwiringPi -lpthread -Wall
|
|
```
|
|
|
|
## Troubleshooting
|
|
|
|
### Frequency adjustment
|
|
|
|
|
|
|
|
## Origin and license
|
|
|
|
This code is fetched from http://www.lamaisonsimon.fr/wiki/doku.php?id=maison2:compteur_d_eau:compteur_d_eau
|
|
|
|
|
|
|
|
The license is unknown, citing one of the authors (fred):
|
|
|
|
> I didn't put a license on this code maybe I should, I didn't know much about it in terms of licensing.
|
|
> this code was made by "looking" at the radian protocol which is said to be open source earlier in the page, I don't know if that helps?
|
|
|
|
|
|
|
|
|